From 4352ed57645d7d87dcf63416cbb70b2b26fc144b Mon Sep 17 00:00:00 2001
From: Roman Lut <11955117+RomanLut@users.noreply.github.com>
Date: Sun, 1 Oct 2023 02:14:54 +0300
Subject: [PATCH 1/3] Update OSD Joystick.md

---
 docs/OSD Joystick.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/docs/OSD Joystick.md b/docs/OSD Joystick.md
index d5ee6a2335..b311547024 100644
--- a/docs/OSD Joystick.md	
+++ b/docs/OSD Joystick.md	
@@ -26,7 +26,7 @@ To simulate 5key joystick, it is sufficient to generate correct voltage on camer
 
 ```set osd_joystick_enabled=on```
 
-Also enable "Multi-color RGB LED Strinp support" in Configuration tab.
+Also enable "Multi-color RGB LED Strip support" in Configuration tab.
 
 # Connection diagram
 

From 97e1db100bc7ee288935d4268bfc29eaa4e22543 Mon Sep 17 00:00:00 2001
From: Roman Lut <11955117+RomanLut@users.noreply.github.com>
Date: Sun, 1 Oct 2023 02:15:52 +0300
Subject: [PATCH 2/3] Update OSD Joystick.md

---
 docs/OSD Joystick.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/docs/OSD Joystick.md b/docs/OSD Joystick.md
index b311547024..f4a0a59066 100644
--- a/docs/OSD Joystick.md	
+++ b/docs/OSD Joystick.md	
@@ -48,7 +48,7 @@ If default voltages does not work with your camera model, then you have to measu
 2. Measure voltages on OSD pin while each key is pressed.
 3. Connect camera to FC throught RC filter as shown on schematix above.
 4. Enable OSD Joystick emulation (see "Enabling OSD Joystick emulation" above)
-4. Use cli ```command led_pin_pwm <value>```, value = 0...100 to find out PWM values for each voltage.
+4. Use cli command ```led_pin_pwm <value>```, value = 0...100 to find out PWM values for each voltage.
 5. Specify PWM values in configuration and save:
 
 ```set osd_joystick_down=0```

From 3f43a804d3215ca85089fa0ae0719b3a07a01e79 Mon Sep 17 00:00:00 2001
From: Roman Lut <11955117+RomanLut@users.noreply.github.com>
Date: Sat, 7 Oct 2023 19:04:37 +0300
Subject: [PATCH 3/3] Update OSD Joystick.md

---
 docs/OSD Joystick.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/docs/OSD Joystick.md b/docs/OSD Joystick.md
index f4a0a59066..9e0f677e45 100644
--- a/docs/OSD Joystick.md	
+++ b/docs/OSD Joystick.md	
@@ -69,7 +69,7 @@ Emulation can be enabled in unarmed state only.
 
 OSD Joystick emulation mode is enabled using the following stick combination:
 
-```RIGHT CENTER```
+```Throttle:CENTER Yaw:RIGHT```
 
 
 Than camera OSD can be navigated using right stick. See [Controls](Controls.md) for all stick combinations.
@@ -78,7 +78,7 @@ Than camera OSD can be navigated using right stick. See [Controls](Controls.md)
 
 Mode is exited using stick combination:
 
-```LEFT CENTER```
+```Throttle:CENTER Yaw:LEFT```
 
 # RC Box