Add a skeleton for the IMX219 tuning file, with data for the BLC
algorithm.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Retrieve root node in YAML tuning file and provide to
each algorithm this YamlObject to allow them to grab their default
parameters by calling init() function.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To prepare for dynamic instantiation of algorithms from the tuning file,
register the algorithms with the Module class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Pass the path name of the YAML IPA tuning file to the IPA module. The
file name is derived from the sensor name ("${sensor_name}.yaml"), with
a fallback to "uncalibrated.yaml".
The tuning file name can be manually overridden with the
LIBCAMERA_RKISP1_TUNING_FILE environment variable.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To help attribute messages logged by the Module class to a particular
IPA module, make the class loggable. The logPrefix() function must be
implemented by the IPA module-specific derived class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Add a Module::createAlgorithms() function to instantiate algorithms from
a YamlObject. The instantiated algorithms are stored in a private member
variable list, exposed through the Module::algorithms() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Add the init() function that will be called during algorithm initialization
to provide each algorithm the list of algorithms tuning data.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In order to allow dynamic instantiation of algorithms based on tuning
data files, add a mechanism to register algorithms with the IPA module.
The implementation relies on an AlgorithmFactory class and a
registration macro, similar to the pipeline handler registration
mechanism. The main difference is that the algorithm registration and
instantiation are implemented in the Module class instead of the
AlgorithmFactory class, making the factory an internal implementation
detail.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The libipa.cpp file exists for the sole purpose of documentating the ipa
namespace. As we now have a top-level module.cpp file in libipa, move
the documentation there, and drop libipa.cpp.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
libipa defines an abstract Algorithm class template that is specialized
by IPA modules. IPA modules then instantiate and manage algorithms
internally, without help from libipa. With ongoing work on tuning data
support for the RkISP1, and future similar work for the IPU3, more code
duplication for algorithms management is expected.
To address this and share code between multiple IPA modules, introduce a
new Module class template that will define and manage top-level concepts
for the IPA module.
The Module class template needs to be specialized with the same types as
the Algorithm class. To avoid manual specialization of both classes,
store the types in the Module class, and replace the template arguments
of the Algorithm class with a single Module argument from which the
other types are retrieved.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The ScalerCrop control is handled directly by the pipeline handler. Remove the
control from the IPA's static ControlInfoMap, and let the pipeline handler add
it to the ControlInfoMap advertised to the application, ensuring the limits
are set appropriately based on the current sensor mode.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The ipa currently advertises a static ControlInfoMap to specify the available
controls and their limits. Fix this limitation by having the IPA populate a new
ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and
FrameDurationLimits controls based on the current sensor mode. This new
ControlInfoMap is then returned back to the pipeline handler and available to
the application after a successful Camera::configure() call.
Before the first call to Camera::configure(), this ControlInfoMap provides some
reasonable default limits for ExposureTime, AnalogueGain, and
FrameDurationLimits. However, applications must not rely on these values, but
obtain the correct limits after the call to Camera::configure().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Currently the pipeline handler advertises controls handled by the IPA from a
static ControlInfoMap defined in the raspberrypi.h header. This change removes
this header file, and instead the IPA returns the ControlInfoMap to the pipeline
handler from the ipa::init() function. This is done to allow the IPA to adjust
the limits of the controls based on the sensor mode in a subsequent change.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=83
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Switch the aperture, lens_position, and flash_intensity fields in the
DeviceStatus structure to use std::optional instead of using invalid default
values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fetch the sensor temperature value from the embedded data buffer and add it to
the DeviceStatus structure in CamHelperImx477::PopulateMetadata().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add an optional sensor_temperature field to the DeviceStatus structure. If a
temperature measurement is available for a frame, the value is returned out
through the SensorTemperature control in the Request metadata.
Additionally, provide the sensor temperature value from the std::ostream &operator<<
overload.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a SensorTemperature control to return the temperature of the camera sensor
in Celsius. This control will only be present in the Request metadata if a
thermal sensor is available to the camera sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
V4L2 Video devices should always start streaming from index zero.
Identify and report a warning if they don't, and correct for any offset.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
There is a limitation that requires input and output to be pixel
for pixel identical in terms of height and width. Remove this
limitation to enable more hardware that doesn't match. Just start
drawing from top left 0, 0 corner.
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Eric Curtin <ecurtin@redhat.com>
The strtol() and strtoul() functions return long integers, which may be
larger than 32-bit integers. Add manual range checks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Now that YamlObject supports iteration, the memberNames() function isn't
useful anymore as it can be implemented using utils::map_keys() if
really needed. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Allow using range-based for loops over YamlObject instances by
implementing iterators. New YamlObject::DictAdapter and
YamlObject::ListAdapter adapter classes are introduced to provide
different iterators depending on the object type.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Han-Lin Chen <hanlinchen@chromium.org>
Existing code is hardcoded to card0. Since recent fedora upgrades, we
have noticed on more than one machine that card1 is present as the
lowest numbered device, could theoretically be higher. This technique
tries every file starting with card and continue only when we have
successfully opened one. These devices with card1 as the lowest device
were simply failing when they do not see a /dev/dri/card0 file present.
Reported-by: Ian Mullins <imullins@redhat.com>
Tested-by: Ian Mullins <imullins@redhat.com>
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The factor used right now in the IPU3 is 8192, as a multiplier of the
estimated gain. This is wrong, as the isp is adding 1.0 to the gain
applied, ie Pout = { Pin * (1 + Gx) }.
Fix it, and to ease the reading, introduce a small helper function.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
As the simple pipeline handler targets simple pipelines on the SoC side,
it often gets used with platforms that have a YUV sensor capable of
outputting different sizes. Extend the heuristics used for pipeline
discovery and configuration to scale as much as possible on the sensor
side, in order to minimize the required bandwidth.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When enumerating the supported configurations, store the corresponding
sensor resolution in the SimpleCameraData::Configuration structure and
use it when configuring the camera, instead of hardcoding the sensor
full resolution. This prepares for support of downscaling in the camera
sensor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
To prepare for the implementation of a more complex format discovery
method, factor out code that tries a pipeline configuration to a
separate function. No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a section to the documentation at the top of the file to describe in
a bit more details how the media graph is traversed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
When pipeline configuration fails, print the format returned by the
kernel in addition to the one requested by libcamera, to ease debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
THe FILE object isn't very user-friendly as it requires manual close.
Replace it with File to provide RAII-style resource management in the
YamlParser API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Dictionaries have a size too, extend the size() function to support
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Turn the Type enum into an enum class to force qualifying 'List' and
'Dictionary' in the YamlObject namespace scope. This will help avoiding
ambiguities when adding iterator support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
When a request completes, a debug message is generated to help
identify the request and the number of streams it contains.
The printed number of streams is however the number of output buffers
requested by the camera framework, not the number of streams generated
by libcamera. In facts, some output buffers are generated by
post-processing, and not directly from the camera.
As the debug message prints the libcamera identifier for the Request, it
is more logical to print the number of streams generated by the camera
instead of the total number of streams.
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When creating the list of StreamConfiguration to be requested to the camera,
map NV12 streams of equal size and format together, so that they will be
generated by using the YUV post-processor.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Mapped streams are generated by post-processing and always require a
source buffer to process image data from.
In case a Mapped stream is requested but its source stream is not, it
is required to allocate a buffer on the fly and add it to the
libcamera::Request.
Make sure a source stream is available for all mapped streams, and if
that's not the case, add a dedicated buffer to the request for that
purpose.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Originally buffer allocation was only required for Internal streams
which are not backed by a frame buffer provided by the Android
framework.
Now that mapped streams can be generated without the corresponding
source stream being part of the Android's provided stream list, also
buffers of type Mapped can be required to allocate buffers on demand.
Create CameraStream::allocator_ and the associated mutex unconditionally
for all types of stream.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a sourceStream field to the CameraStream class, meant to contain a
reference to the direct stream which produces actual image data for
streams of type CameraStream::Mapped.
The sourceStream of mapped streams will be used in later patches to make
sure for each Mapped stream at least one libcamera::Stream is queued to
the libcamera::Camera.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a Python version of simple-cam from:
https://git.libcamera.org/libcamera/simple-cam.git
Let's keep this in the libcamera repository until the Python API has
stabilized a bit more, and then we could move this to the simple-cam
repo.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a slightly more complex, and I think a more realistic, example,
where the script reacts to events and re-queues the buffers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add an example to showcase the more-or-less minimal capture case.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Extend the logger to support coloring messages. The log level is
colorized with per-level colors, and the category with a fixed color.
This makes the log output more readable.
Coloring is enabled by default when logging to std::cerr, and can be
disabled by setting the LIBCAMERA_LOG_NO_COLOR environment variable.
When logging to a file with LIBCAMERA_LOG_FILE, coloring is disabled. It
can be enabled for file logging using the logSetFile() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
If a sensor driver does not support test patterns (e.g. IMX477),
libcamera throws an unnecessary error message during initialisation when
it sets the test pattern to off.
Fix this by moving the error message into setTestPatternMode() where the
pipeline handler explicitly requests to set a test pattern.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
With the recent addition of operator<<() in most libcamera core classes
to replace usage of the toString() function the Request class was left
behind.
Add operator<<() for the Request class and reimplement toString().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
We always call CameraManager.read_event() and
CameraManager.get_ready_requests(), so to simplify the use merge the
read_event() into the get_ready_requests().
This has the side effect that get_ready_requests() will now block if
there is no event ready. If we ever need to call get_ready_requests() in
a polling manner we will need a new function which behaves differently.
However, afaics the only sensible way to manage the event loop is to use
select/poll on the eventfd and then call get_ready_requests() once,
which is the use case what the current merged function supports.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The format is used by the i.MX8 ISI driver that will be supported by the
simple pipeline handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The format is used by the i.MX8 ISI driver that will be supported by the
simple pipeline handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
