Indentation fixed so that cpplint is ok

radio/src/audio_avr.cpp

@@ -227,7 +227,7 @@ void audioQueue::event(uint8_t e, uint8_t f)
           break;
         default:
         {
-          const static pm_uint8_t singleSounds[] PROGMEM = {
+          static const pm_uint8_t singleSounds[] PROGMEM = {
               70, 10, 2, PLAY_REPEAT(2)|PLAY_NOW,  // INACTIVITY
               BEEP_DEFAULT_FREQ, 40, 1, PLAY_NOW,  // ERROR
               BEEP_KEY_UP_FREQ, 10, 1, PLAY_NOW,   // KEYPAD_UP

radio/src/eeprom_raw.cpp

@@ -545,32 +545,7 @@ void ee32_process()
     Eeprom32_process_state = E32_READSENDING ;
   }
 
-  if ( Eeprom32_process_state == E32_READSENDING )
-  {
-#if 0
-    if ( Spi_complete )
-    {
-      uint32_t blank = 1 ;
-      x = Eeprom32_data_size + sizeof( struct t_eeprom_header ) ;	// Size needing to be checked
-      p = (uint8_t *) &Eeprom_buffer ;
-      while ( x )
-      {
-        if ( *p++ != 0xFF )
-        {
-          blank = 0 ;
-          break ;
-        }
-        x -= 1 ;
-      }
-      // If not blank, sort erasing here
-      if ( blank )
-      {
-        Eeprom32_state_after_erase = E32_IDLE ; // TODO really needed?
-        Eeprom32_process_state = E32_WRITESTART ;
-      }
-      else
-      {
-#endif
+  if (Eeprom32_process_state == E32_READSENDING) {
 #ifdef SIMU
     Eeprom32_process_state = E32_WRITESTART ;
 #else
@@ -585,12 +560,9 @@ void ee32_process()
     Eeprom32_process_state = E32_ERASESENDING ;
     Eeprom32_state_after_erase = E32_WRITESTART ;
 #endif
-      // }
-   // }
   }
 
-  if ( Eeprom32_process_state == E32_WRITESTART )
-  {
+  if (Eeprom32_process_state == E32_WRITESTART) {
     uint32_t total_size ;
     p = Eeprom32_source_address;
     q = (uint8_t *) &Eeprom_buffer.data;

radio/src/eeprom_rlc.cpp

@@ -746,8 +746,7 @@ void RlcFile::nextRlcWriteStep()
 
   if (m_rlc_len==0) goto close;
 
-  for (i=1; 1; i++) // !! laeuft ein byte zu weit !!
-  {
+  for (i=1; 1; i++) { // !! laeuft ein byte zu weit !!
     bool cur0 = m_rlc_buf[i] == 0;
     if (cur0 != run0 || cnt==0x3f || (cnt0 && cnt==0x0f) || i==m_rlc_len) {
       if (run0) {
@@ -783,18 +782,17 @@ void RlcFile::nextRlcWriteStep()
   close:
 
   switch(m_write_step) {
-     case WRITE_START_STEP:
-     {
-       blkid_t fri=0;
+    case WRITE_START_STEP: {
+      blkid_t fri = 0;
 
-       if (m_currBlk && (fri=EeFsGetLink(m_currBlk))) {
+      if (m_currBlk && (fri = EeFsGetLink(m_currBlk))) {
         // TODO reuse EeFsFree!!!
         blkid_t prev_freeList = eeFs.freeList;
         eeFs.freeList = fri;
 #if defined(PCBTARANIS)
         freeBlocks++;
 #endif
-         while( EeFsGetLink(fri)) {
+        while (EeFsGetLink(fri)) {
           fri = EeFsGetLink(fri);
 #if defined(PCBTARANIS)
           freeBlocks++;
@@ -806,8 +804,7 @@ void RlcFile::nextRlcWriteStep()
       }
     }
 
-     case WRITE_FINAL_DIRENT_STEP:
-     {
+    case WRITE_FINAL_DIRENT_STEP: {
       m_currBlk = eeFs.files[FILE_TMP].startBlk;
       DirEnt & f = eeFs.files[m_fileId];
       eeFs.files[FILE_TMP].startBlk = f.startBlk;

radio/src/eeprom_rlc.h

@@ -184,7 +184,7 @@ class RlcFile: public EFile
     uint8_t m_ratio;
 #endif
 
-public:
+  public:
 
     void openRlc(uint8_t i_fileId);
 

radio/src/opentx.h

@@ -585,20 +585,24 @@ extern uint8_t channel_order(uint8_t x);
 class Key
 {
 #define FILTERBITS      4
+
 #ifdef SIMU
-#define FFVAL 1
+  #define FFVAL 1
 #else
-#define FFVAL          ((1<<FILTERBITS)-1)
+  #define FFVAL          ((1<<FILTERBITS)-1)
 #endif
+
 #define KSTATE_OFF      0
 #define KSTATE_RPTDELAY 95 // gruvin: delay state before key repeating starts
 #define KSTATE_START    97
 #define KSTATE_PAUSE    98
 #define KSTATE_KILLED   99
+
+  private:
     uint8_t m_vals;   // key debounce?  4 = 40ms
     uint8_t m_cnt;
     uint8_t m_state;
-public:
+  public:
     void input(bool val, EnumKeys enuk);
     bool state()       { return m_vals > 0; }
     void pauseEvents() { m_state = KSTATE_PAUSE; m_cnt = 0; }

radio/src/rtc.cpp

@@ -51,10 +51,7 @@ extern void rtcdriver_settime(struct gtm * t);
    implementations (e.g., UNICOS 9.0 on a Cray Y-MP EL) don't shift
    right in the usual way when A < 0, so SHR falls back on division if
    ordinary A >> B doesn't seem to be the usual signed shift.  */
-#define SHR(a, b)       \
-  (-1 >> 1 == -1        \
-   ? (a) >> (b)         \
-   : (a) / (1 << (b)) - ((a) % (1 << (b)) < 0))
+#define SHR(a, b) (-1 >> 1 == -1 ? (a) >> (b) : (a) / (1 << (b)) - ((a) % (1 << (b)) < 0))
 
 /* The extra casts in the following macros work around compiler bugs,
    e.g., in Cray C 5.0.3.0.  */

radio/src/simu.cpp

@@ -51,7 +51,8 @@ int g_snapshot_idx = 0;
 class Open9xSim: public FXMainWindow
 {
   FXDECLARE(Open9xSim)
-public:
+
+  public:
     Open9xSim(){};
     Open9xSim(FXApp* a);
     long onKeypress(FXObject*,FXSelector,void*);
@@ -60,12 +61,12 @@ public:
     void doEvents();
     void refreshDiplay();
 
-private:
+  private:
     FXImage       *bmp;
     FXImageFrame  *bmf;
     bool           firstTime;
 
-public:
+  public:
     FXSlider      *sliders[8];
     FXKnob        *knobs[NUM_POTS];
 };

radio/src/templates.h

@@ -53,8 +53,8 @@
  *
  */
 
-#ifndef TEMPLATES_H
-#define TEMPLATES_H
+#ifndef TEMPLATES_H_
+#define TEMPLATES_H_
 
 #include <inttypes.h>