1
0
Fork 0
mirror of https://github.com/opentx/opentx.git synced 2025-07-24 00:35:18 +03:00
opentx/applets/ersky9x/common/applet.h
2012-05-25 18:24:34 +00:00

101 lines
4 KiB
C

/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef APPLET_H
#define APPLET_H
/*----------------------------------------------------------------------------
* Global definitions
*----------------------------------------------------------------------------*/
/** Refers to the Version of SAM-BA */
#define SAM_BA_APPLETS_VERSION "2.11"
/** Applet initialization command code.*/
#define APPLET_CMD_INIT 0x00
/** Applet full erase command code.*/
#define APPLET_CMD_FULL_ERASE 0x01
/** Applet write command code.*/
#define APPLET_CMD_WRITE 0x02
/** Applet read command code.*/
#define APPLET_CMD_READ 0x03
/** Applet read command code.*/
#define APPLET_CMD_LOCK 0x04
/** Applet read command code.*/
#define APPLET_CMD_UNLOCK 0x05
/** Applet set/clear GPNVM command code.*/
#define APPLET_CMD_GPNVM 0x06
/** Applet set security bit command code.*/
#define APPLET_CMD_SECURITY 0x07
/** Applet buffer erase command code.*/
#define APPLET_CMD_BUFFER_ERASE 0x08
/** Applet binary page command code for Dataflash.*/
#define APPLET_CMD_BINARY_PAGE 0x09
/** List Bad Blocks of a Nandflash*/
#define APPLET_CMD_LIST_BAD_BLOCKS 0x10
/** Tag a Nandflash Block*/
#define APPLET_CMD_TAG_BLOCK 0x11
/** Read the Unique ID bits (on SAM3)*/
#define APPLET_CMD_READ_UNIQUE_ID 0x12
/** Applet blocks erase command code. */
#define APPLET_CMD_ERASE_BLOCKS 0x13
/** Applet batch full erase command code. */
#define APPLET_CMD_BATCH_ERASE 0x14
/** Operation was successful.*/
#define APPLET_SUCCESS 0x00
/** Device unknown.*/
#define APPLET_DEV_UNKNOWN 0x01
/** Write operation failed.*/
#define APPLET_WRITE_FAIL 0x02
/** Read operation failed.*/
#define APPLET_READ_FAIL 0x03
/** Protect operation failed.*/
#define APPLET_PROTECT_FAIL 0x04
/** Unprotect operation failed.*/
#define APPLET_UNPROTECT_FAIL 0x05
/** Erase operation failed.*/
#define APPLET_ERASE_FAIL 0x06
/** No device defined in board.h*/
#define APPLET_NO_DEV 0x07
/** Read / write address is not aligned*/
#define APPLET_ALIGN_ERROR 0x08
/** Read / write found bad block*/
#define APPLET_BAD_BLOCK 0x09
/** Applet failure.*/
#define APPLET_FAIL 0x0f
/** Communication link identification*/
#define USB_COM_TYPE 0x00
#define DBGU_COM_TYPE 0x01
#define JTAG_COM_TYPE 0x02
#endif //#ifndef APPLET_H