pmOS cannot boot without these two. There was recently someone in the
unofficial postmarketOS Telegram group who used some minimal config and
couldn't figure out why the initramfs couldn't start up, and these
options being disabled turned out to be the culprit. As such, let's
ensure these are enabled to make life easier for people setting up new
kernel configurations.
Reviewed-by: Oliver Smith <ollieparanoid@postmarketos.org>
Tested-by: Oliver Smith <ollieparanoid@postmarketos.org>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230128203716.152281-1-newbyte@postmarketos.org%3E
Always set GOCACHE during build and let it point to pmbootstrap's work
dir. This has a similar effect as using ccache for C/C++.
Set GOMODCACHE conditionally: this is for caching the go modules (git
repositories) that get cloned during a build if they are not bundled
with the source. Usually APKBUILDs should cache them, but when using
pmbootstrap build --src, they would get downloaded over and over again.
Set GOMODCACHE automatically for --src and allow enabling/disabling this
manually with new --go-mod-cache / --no-go-mod-cache.
This speeds up multiple iterations of building the same package
significantly. I'm using it for:
$ pmbootstrap build postmarketos-mkinitfs --src=...
I've verified that using the same GOCACHE dir for multiple architectures
doesn't result in build artifacts for the wrong arch getting used.
Reviewed-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lists.sr.ht/~postmarketos/pmbootstrap-devel/%3C20230223064743.1773-1-ollieparanoid@postmarketos.org%3E
Adjust to avbtool now being part of android-tools in alpine edge.
Instead of trying to install both (which fails on edge), take the
dependencies from a new pmaports.cfg variable
supported_fastboot_depends, which only contains android-tools in
pmaports.git master branch.
Related: https://postmarketos.org/pmaports.cfg
Commit d8f2f20186 removed
the requirement of selecting MEMCG_SWAP for Kernels >= 6.1.
However, it did not fully account for the behavior change,
as MEMCG_SWAP depends on both MEMCG and SWAP.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Add a new command that makes running CI scripts easy. The user goes to
the git repository of choice, which has CI scripts written in a certain
format, and then runs 'pmbootstrap ci' to get an interactive selection
of which of the available scripts to run (or "all"). Specifying one or
multiple scripts on the command-line is also possible, e.g.
$ pmbootstrap ci flake8
$ pmbootstrap ci shellcheck flake8 pytest
$ pmbootstrap ci --all
pmbootstrap then either runs the selected scripts in a chroot (and
installs dependencies as defined at the beginning of the CI scripts), or
natively (with checks inside the scripts for having dependencies
installed). Running natively is needed for .ci/pytest.sh in this
pmbootstrap.git repository, as pmbootstrap can't run inside pmbootstrap.
Running natively or in chroot is defined in an "# Options: " comment
inside the script file.
Documentation for this command and how script files look like:
https://postmarketos.org/pmb-ci
Enable pmbootstrap to work on riscv64 packages, and at the same time
also expand the alpine_to_hostspec list to match upstream (adding
riscv32 and loongarch*).
While introducing multiple pmb:kconfigcheck-* APKBUILD options we missed
adding them to this array leading to potential apkbuild-lint failures.
This hasn't been noticed much because the check in apkbuild-lint is
relatively buggy, see https://gitlab.alpinelinux.org/Leo/atools/-/issues/48
Do not only parse triggers, but also emit them in the packages dicts in
pmb.parse.apkbuild. This is the first half to fix pmaports issue 1690,
the other is in pmaports MR 3386.
This includes setting header_version="2" as well as dtb_offset
according to the input boot.img when header v2 is detected.
Also adds the following previously missed deviceinfo_attributes:
* "header_version"
* "bootimg_custom_args"
And fixes failing tests now that header_version is always parsed from
boot.img files.
One of the main purposes of lk2nd is to have a replacement for
the stock bootloader "Odin mode" on many Samsung devices with
sane fastboot implementation, which supports many more features
like live booting and many others.
This is done by using heimdall to flash lk2nd to device's boot
partition. Allow this method to be used with this flash action.
Stock bootloader on these devices boots kernel (it is intended to boot
kernel, but i place secondary bootloader there) from special ChromeOS
kernel partition on special GPT which is created with cgpt utility.
This MR adds initial support for it introducing new deviceinfo options:
- cgpt_kpart - path to file to be flashed to ChromeOS partition;
- cgpt_kpart_start - offset from the start in sectors;
- cgpt_kpart_size - partition size in sectors.
For example:
deviceinfo_cgpt_kpart="/usr/share/u-boot/google-peach-pit/u-boot-dtb.img.kpart"
deviceinfo_cgpt_kpart_start="8192"
deviceinfo_cgpt_kpart_size="32768"
cgpt requires start and size values of partition, so these values
are calculated for each partition.
Reserved size and on-device installer are not yet supported.
Reference: https://archlinuxarm.org/platforms/armv7/samsung/samsung-chromebook
