The output local variable in Logger::logSetTarget() isn't necessary.
Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
libcamera uses double quotes for #include directives for internal
headers. A few <...> have found their way in the code base over time.
Fix them.
While at it, move an Android header include to the right location.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
libcamera uses the "..." include style for internal headers. Enforce it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The IncludeOrderFormatter will be extended with more formatting rules
that should be applied before clang-format gets run, as it will
influence its output.
Add a priority mechanism for formatters, and give a negative priority to
the CLangFormatter to make it run last.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Commit 8a845ab078 ("libcamera: Replace toString with operator<<() for
format classes") incorrectly converted some of the toString() usages,
resulting in pointer values being printed instead of formats. Fix it.
Fixes: 8a845ab078 ("libcamera: Replace toString with operator<<() for format classes")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
We create symlinks from the Python bindings build dir to the source dir
so that 1) the build dir can be used to use the bindings, and 2) to
allow modifications of the source .py files to be used right away
without rebuilding.
The symlinks were recently fixed and changed to use absolute paths.
However, absolute paths ruin one main use case I have: using the
bindings from the build dir via nfs from an ARM device.
So move back to relative paths, but accomplish this with the --relative
parameter for ln, instead of guessing the right relative path as was
done before the above-mentioned fix.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Generate bindings for properties in a very similar way as done for
controls. We do need to distinguish between the two, and thus I added
--properties flag to gen-py-controls.py.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Perhaps it's better to have a more descriptive name here. I also
considered just renaming 'efd' to 'fd', but 'event_fd' won.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add ControlInfo class and change the controls related methods to
resemble the C++ API (e.g. no more string based control methods).
We don't implement ControlList or ControlInfoMap but just expose the
same data via standard Python dict.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The Python bindings controls generation was not very good. It only
covered the enums and they were in the main namespace.
This adds the controls somewhat similarly to the C++ side. We will have
e.g.:
libcamera.controls.Brightness
libcamera.controls.AeMeteringModeEnum.CentreWeighted
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Convert ctx and state dicts to classes. No functional changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Drop WA_ShowWithoutActivating from the Qt renderers. I added the flag
during development phase as I didn't want the window to take the focus,
but it should be removed now.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a few type hints and (minimal) docs to MappedFrameBuffer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Move MappedFrameBuffer to libcamera.utils, instead of extending
FrameBuffer class with a new mmap() method. This keeps us more aligned
to the C++ API.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add CameraManager.read_event() so that the user does not need to call
os.read().
We use eventfd, and we must always read 8 bytes. Hiding that inside
read_event() makes sense.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
"None" is not a valid name for an enum value, so change it to "Null".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Stripping 'SceneFlicker' prefix from the enum value names leads to
'50Hz' and '60Hz', which are not valid names. So add another heuristics
to keep the prefix for SceneFlicker.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Use the new libcamera.formats in cam_qt.py.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Generate a list of pixel formats under 'libcamera.formats'.
The 'formats' is a "dummy" container class, the only purpose of which is
to contain the read-only pixel format properties.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The C structures used to serialize controls are currently defined in the
root namespace, which places them at the root level in the class list
generated by Doxygen. Move them to the libcamera namespace to fix that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Use the removable attribute exposed by the USB device in sysfs to infer
if the camera is an external (when removable) or front (when
non-removable) camera. This is likely not perfect as the removable
attribute is derived from ACPI data which may not always be accurate,
and non-ACPI platforms likely report all devices as removable. Still,
this is a first step upon which a better method could be built.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
The MediaDevice::driver(), deviceNode() and model() functions return a
const std::string, copying the string stored internally in the class.
Return references instead to avoid copies.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Add support for the Sony IMX477 sensor in the camera helper database.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add an entry to the sensor properties for Sony IMX477. Currently
no test pattern modes are supported by the device driver.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The exponential gain documentation is missing a '\' in the equation. Fix
t.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
This patch describes a series of controls that allow applications to
drive AF algorithms:
AfMode - manual, auto or continuous
AfRange - full, macro or normal
AfSpeed - fast or slow
AfMetering - how to choose where to measure focus
AfWindows - AF window locations
AfTrigger - start (trigger) an AF scan or cancel
AfPause - pause continuous AF
LensPosition - set or retrieve position of lens
AfState - reports whether scanning/success/failure
AfPauseState - reports whether continuous AF paused or not
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
So we have at least two supported capturing pixel formats (although
many possible output pixel formats thanks to SDL conversion). MJPG
support only built in if SDL2_image is available, provides
decompression.
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This adds more portability to existing cam sinks. You can pass a
YUYV camera buffer and SDL will handle the pixel buffer conversion
to the display. This allows cam reference implementation to display
images on VMs, Mac M1, Raspberry Pi, etc. This also enables cam
reference implementation, to run as a desktop application in Wayland or
X11. SDL also has support for Android and ChromeOS which has not been
tested. Also tested on simpledrm Raspberry Pi 4 framebuffer
successfully where existing kms sink did not work. Can also be used as
kmsdrm sink. Only supports one camera stream at present.
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Extend the EventLoop class to support periodic timer events. This can be
used to run tasks periodically, such as handling the event loop of SDL.
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
With the addition of addTimerEvent, the naming of addEvent is specific
to the management of an fd, while the naming is generic.
Update the name to make the naming scheme consistent in specifying the
type of event to be added.
Signed-off-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The freeBuffers() cleanup code calls into the IPA to unmap and free
shared buffers. However, this function could be called before the IPA
has opened (via registerCamera()), causing a segmentation fault. Fix
this by guarding against calling the IPA if it has not been opened.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a "--script" option to the cam test application to allow specify a
capture script to be used to drive the capture session. Add to the
CameraSession class a script parser instance, created conditionally to
the OptCaptureScript option.
If the script parser has been created, use it at queueRequest time to
retrieve the list of controls that has to be associated with a Request,
and populate Request::controls() with it before queueing it to the
Camera.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The CameraSession::processRequest() frame completion handler currently
re-queues completed requests by calling Camera::queueRequests()
explicitely.
In order to maintain the CameraSession::queuedRequest_ counter up to
date with the actual number of queued requests, call the
CameraSession::queueRequest() instead of operating the Camera directly.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a parser class to the cam test application to control the capture
operations through a yaml script.
The capture script currently allow to specify a list of controls and
their associated values to be applied per-frame.
Also add a trivial capture script example to showcase the intended
script structure.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Now that we have dropped gcc 7 support, remove the compatibility with
gcc versions older than 8 that implemented the filesystem API in the
std::experimental namespace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Remove extra "0x" from the print.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Try to be more consistent with the names, and include "control" in all
the names.
Also drop a useless "using namespace libcamera" and only include
"control_ids.h".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Having the underscore makes the names more readable, especially when
there are multiple words in the name.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Now that we have proper geometry classes in the Python bindings, change
the existing bindings and the .py files accordingly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add libcamera's geometry classes to the Python bindings.
Note that this commit only adds the classes, but they are not used
anywhere yet.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement PixelFormat bindings properly with a PixelFormat class. Change
the bindings to use the new class instead of a string.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of doing an atomic commit for each stream, do a single commit
for the two planes. This fixes the issue that only the first plane was
actually shown.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Support multiplanar formats in the kms renderer. Tested with RPi and
NV12.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Catch exceptions in the event_handler, as they would get ignored
otherwise. Print the exception and return False so that the main loop
exits.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add checks to CameraTesterBase to verify that both the Camera and the
CameraManager gets freed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
pyright complains about passing fileobj to os.read. Indeed, the
parameter should be an int, but I guess fileobj gets automatically
converted. In any case, using the fd is better.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
