mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-19 06:15:16 +03:00
SPRACINGH7ZERO - STM32H750 400Mhz FC with OSD, Baro & BEC.
Website: http://seriouslypro.com/spracingh7zero Shop: https://shop.seriouslypro.com/sp-racing-h7-zero STM32 H7 400Mhz CPU (1MB Ram, 128k flash) 128MByte Flash (for firmware, config and Blackbox logging, 4-bit QuadSPI not 1-bit SPI) Single ICM20602 Gyro (SPI, with interrupt signals, 32khz capable) BMP388 Baro (I2C + interrupt) OSD (dedicated SPI) SD Card (4-bit SDIO not 1-bit SPI) 2-6S BEC 8 Motor outputs 6 Serial ports. Single sided PCB. Entire PCB side dedicated to solder pads.
This commit is contained in:
Dominic Clifton
parent
7a84a5cf73
commit
45703e5a52
4 changed files with 350 additions and 0 deletions
44
src/main/target/SPRACINGH7ZERO/config.c
Normal file
44
src/main/target/SPRACINGH7ZERO/config.c
Normal file
|
|
@ -0,0 +1,44 @@
|
|||
/*
|
||||
* This file is part of Cleanflight and Betaflight.
|
||||
*
|
||||
* Cleanflight and Betaflight are free software. You can redistribute
|
||||
* this software and/or modify this software under the terms of the
|
||||
* GNU General Public License as published by the Free Software
|
||||
* Foundation, either version 3 of the License, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* Cleanflight and Betaflight are distributed in the hope that they
|
||||
* will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
||||
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
* See the GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this software.
|
||||
*
|
||||
* If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include "platform.h"
|
||||
|
||||
#ifdef USE_TARGET_CONFIG
|
||||
|
||||
#include "config_helper.h"
|
||||
|
||||
#include "io/serial.h"
|
||||
#include "osd/osd.h"
|
||||
#include "pg/pg.h"
|
||||
|
||||
static targetSerialPortFunction_t targetSerialPortFunction[] = {
|
||||
{ SERIAL_PORT_USART1, FUNCTION_MSP },
|
||||
{ SERIAL_PORT_USART2, FUNCTION_MSP },
|
||||
};
|
||||
|
||||
void targetConfiguration(void)
|
||||
{
|
||||
osdConfigMutable()->core_temp_alarm = 85;
|
||||
targetSerialPortFunctionConfig(targetSerialPortFunction, ARRAYLEN(targetSerialPortFunction));
|
||||
}
|
||||
#endif
|
||||
59
src/main/target/SPRACINGH7ZERO/target.c
Normal file
59
src/main/target/SPRACINGH7ZERO/target.c
Normal file
|
|
@ -0,0 +1,59 @@
|
|||
/*
|
||||
* This file is part of Cleanflight and Betaflight.
|
||||
*
|
||||
* Cleanflight and Betaflight are free software. You can redistribute
|
||||
* this software and/or modify this software under the terms of the
|
||||
* GNU General Public License as published by the Free Software
|
||||
* Foundation, either version 3 of the License, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* Cleanflight and Betaflight are distributed in the hope that they
|
||||
* will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
||||
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
* See the GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this software.
|
||||
*
|
||||
* If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include "platform.h"
|
||||
#include "drivers/io.h"
|
||||
|
||||
#include "drivers/dma.h"
|
||||
#include "drivers/timer.h"
|
||||
#include "drivers/timer_def.h"
|
||||
|
||||
const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
|
||||
DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED, 0, 10, 0 ), // LED Strip
|
||||
DEF_TIM(TIM2, CH4, PB11, TIM_USE_TRANSPONDER, 0, 11, 0 ), // Transponder
|
||||
|
||||
DEF_TIM(TIM12, CH2, PB15, TIM_USE_PPM | TIM_USE_PWM, 0, 0, 0 ), // Also USART1 RX
|
||||
|
||||
DEF_TIM(TIM15, CH1, PE5, TIM_USE_CAMERA_CONTROL, 0, 0, 0 ),
|
||||
DEF_TIM(TIM15, CH2, PE6, TIM_USE_NONE, 0, 0, 0 ),
|
||||
|
||||
DEF_TIM(TIM5, CH1, PA0, TIM_USE_MOTOR, 0, 0, 0 ), // M1
|
||||
DEF_TIM(TIM5, CH2, PA1, TIM_USE_MOTOR, 0, 1, 0 ),
|
||||
DEF_TIM(TIM5, CH3, PA2, TIM_USE_MOTOR, 0, 2, 0 ),
|
||||
DEF_TIM(TIM5, CH4, PA3, TIM_USE_MOTOR, 0, 3, 0 ), // M4
|
||||
|
||||
DEF_TIM(TIM4, CH1, PB6, TIM_USE_MOTOR, 0, 4, 1 ), // M5
|
||||
DEF_TIM(TIM4, CH2, PB7, TIM_USE_MOTOR, 0, 5, 1 ), // M6
|
||||
|
||||
DEF_TIM(TIM8, CH1, PC6, TIM_USE_MOTOR, 0, 6, 2 ), // M7
|
||||
DEF_TIM(TIM8, CH2, PC7, TIM_USE_MOTOR, 0, 7, 2 ), // M8
|
||||
|
||||
DEF_TIM(TIM4, CH3, PD14, TIM_USE_MOTOR, 0, 12, 0 ), // M9
|
||||
DEF_TIM(TIM4, CH4, PD15, TIM_USE_MOTOR, 0, 0, 0 ), // M10 // Note: No DMA on TIM4_CH4, can use with BURST DSHOT using TIM4_UP
|
||||
|
||||
DEF_TIM(TIM3, CH1, PA6, TIM_USE_NONE, 0, 0, 0 ), // Also TIM13/CH1
|
||||
DEF_TIM(TIM3, CH2, PA7, TIM_USE_NONE, 0, 0, 0 ), // Also TIM14/CH1
|
||||
DEF_TIM(TIM3, CH3, PB0, TIM_USE_NONE, 0, 0, 0 ), // Also TIM8/CH2_N
|
||||
DEF_TIM(TIM3, CH4, PB1, TIM_USE_NONE, 0, 0, 0 ), // Also TIM8/CH3_N
|
||||
};
|
||||
|
||||
|
||||
230
src/main/target/SPRACINGH7ZERO/target.h
Normal file
230
src/main/target/SPRACINGH7ZERO/target.h
Normal file
|
|
@ -0,0 +1,230 @@
|
|||
/*
|
||||
* This file is part of Cleanflight and Betaflight.
|
||||
*
|
||||
* Cleanflight and Betaflight are free software. You can redistribute
|
||||
* this software and/or modify this software under the terms of the
|
||||
* GNU General Public License as published by the Free Software
|
||||
* Foundation, either version 3 of the License, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* Cleanflight and Betaflight are distributed in the hope that they
|
||||
* will be useful, but WITHOUT ANY WARRANTY; without even the implied
|
||||
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
* See the GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this software.
|
||||
*
|
||||
* If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define TARGET_BOARD_IDENTIFIER "SP7Z"
|
||||
#define USBD_PRODUCT_STRING "SPRacingH7ZERO"
|
||||
|
||||
#define USE_TARGET_CONFIG
|
||||
|
||||
#define DEBUG_MODE DEBUG_ADC_INTERNAL
|
||||
|
||||
#define LED0_PIN PE3
|
||||
|
||||
#define USE_BEEPER
|
||||
#define BEEPER_PIN PD7
|
||||
#define BEEPER_INVERTED
|
||||
|
||||
// Force two buttons to look at the single button so config reset on button works
|
||||
#define USE_BUTTONS
|
||||
#define BUTTON_A_PIN PE4
|
||||
#define BUTTON_A_PIN_INVERTED // Active high
|
||||
#define BUTTON_B_PIN PE4
|
||||
#define BUTTON_B_PIN_INVERTED // Active high
|
||||
|
||||
#define USE_QUADSPI
|
||||
#define USE_QUADSPI_DEVICE_1
|
||||
|
||||
#define QUADSPI1_SCK_PIN PB2
|
||||
|
||||
#define QUADSPI1_BK1_IO0_PIN PD11
|
||||
#define QUADSPI1_BK1_IO1_PIN PD12
|
||||
#define QUADSPI1_BK1_IO2_PIN PE2
|
||||
#define QUADSPI1_BK1_IO3_PIN PD13
|
||||
#define QUADSPI1_BK1_CS_PIN PB10
|
||||
|
||||
#define QUADSPI1_BK2_IO0_PIN PE7
|
||||
#define QUADSPI1_BK2_IO1_PIN PE8
|
||||
#define QUADSPI1_BK2_IO2_PIN PE9
|
||||
#define QUADSPI1_BK2_IO3_PIN PE10
|
||||
#define QUADSPI1_BK2_CS_PIN NONE
|
||||
|
||||
#define QUADSPI1_MODE QUADSPI_MODE_BK1_ONLY
|
||||
#define QUADSPI1_CS_FLAGS (QUADSPI_BK1_CS_HARDWARE | QUADSPI_BK2_CS_NONE | QUADSPI_CS_MODE_LINKED)
|
||||
|
||||
#define USE_FLASH_CHIP
|
||||
#define EEPROM_IN_EXTERNAL_FLASH
|
||||
//#define EEPROM_IN_SDCARD
|
||||
//#define EEPROM_IN_RAM
|
||||
#if !defined(EEPROM_IN_RAM) && !defined(EEPROM_IN_SDCARD) && !defined(EEPROM_IN_EXTERNAL_FLASH)
|
||||
#error "EEPROM storage location not defined"
|
||||
#endif
|
||||
|
||||
#define USE_UART
|
||||
|
||||
#define USE_UART1
|
||||
#define UART1_RX_PIN PB15
|
||||
#define UART1_TX_PIN PB14
|
||||
|
||||
#define USE_UART2
|
||||
#define UART2_RX_PIN NONE
|
||||
#define UART2_TX_PIN PD5 // TX pin is bidirectional.
|
||||
|
||||
#define USE_UART3
|
||||
#define UART3_RX_PIN PD9
|
||||
#define UART3_TX_PIN PD8
|
||||
|
||||
#define USE_UART4
|
||||
#define UART4_RX_PIN PD0
|
||||
#define UART4_TX_PIN PD1
|
||||
|
||||
#define USE_UART5
|
||||
#define UART5_RX_PIN PB5
|
||||
#define UART5_TX_PIN PB13
|
||||
|
||||
#define USE_UART6
|
||||
#define UART6_RX_PIN PC7 // aka M7
|
||||
#define UART6_TX_PIN PC6 // aka M8
|
||||
|
||||
#define USE_UART8
|
||||
#define UART8_RX_PIN PE0
|
||||
#define UART8_TX_PIN PE1
|
||||
|
||||
#define USE_VCP
|
||||
#define USE_USB_ID
|
||||
|
||||
#define SERIAL_PORT_COUNT 8
|
||||
|
||||
#define USE_SPI
|
||||
|
||||
#define USE_SPI_DEVICE_2
|
||||
#define SPI2_SCK_PIN PD3
|
||||
#define SPI2_MISO_PIN PC2
|
||||
#define SPI2_MOSI_PIN PC3
|
||||
#define SPI2_NSS_PIN PB12
|
||||
|
||||
#define USE_SPI_DEVICE_3
|
||||
#define SPI3_SCK_PIN PB3
|
||||
#define SPI3_MISO_PIN PB4
|
||||
#define SPI3_MOSI_PIN PD6
|
||||
#define SPI3_NSS_PIN PA15
|
||||
|
||||
#define USE_SPI_DEVICE_4
|
||||
#define SPI4_SCK_PIN PE12
|
||||
#define SPI4_MISO_PIN PE13
|
||||
#define SPI4_MOSI_PIN PE14
|
||||
#define SPI4_NSS_PIN PE11
|
||||
|
||||
#define USE_I2C
|
||||
#define USE_I2C_DEVICE_1
|
||||
#define I2C1_SCL PB8
|
||||
#define I2C1_SDA PB9
|
||||
#define I2C_DEVICE (I2CDEV_1)
|
||||
|
||||
#define USE_MAG
|
||||
#define USE_MAG_HMC5883
|
||||
|
||||
#define USE_BARO
|
||||
#define USE_BARO_BMP388
|
||||
|
||||
#define USE_GYRO
|
||||
#define USE_GYRO_SPI_MPU6500
|
||||
#define USE_MULTI_GYRO
|
||||
#undef USE_GYRO_REGISTER_DUMP
|
||||
|
||||
#define USE_EXTI
|
||||
#define USE_GYRO_EXTI
|
||||
#define GYRO_1_EXTI_PIN PD4
|
||||
#define GYRO_2_EXTI_PIN PE15
|
||||
#define USE_MPU_DATA_READY_SIGNAL
|
||||
#define ENSURE_MPU_DATA_READY_IS_LOW
|
||||
|
||||
|
||||
#define GYRO_1_CS_PIN SPI3_NSS_PIN
|
||||
#define GYRO_1_SPI_INSTANCE SPI3
|
||||
|
||||
#define GYRO_2_CS_PIN SPI2_NSS_PIN
|
||||
#define GYRO_2_SPI_INSTANCE SPI2
|
||||
|
||||
#define USE_ACC
|
||||
#define USE_ACC_SPI_MPU6500
|
||||
|
||||
#define GYRO_1_ALIGN CW180_DEG
|
||||
#define GYRO_2_ALIGN CW90_DEG
|
||||
|
||||
#define GYRO_CONFIG_USE_GYRO_DEFAULT GYRO_CONFIG_USE_GYRO_1
|
||||
|
||||
#define USE_FLASHFS
|
||||
#define USE_FLASH_TOOLS
|
||||
#define USE_FLASH_W25N01G
|
||||
#define FLASH_QUADSPI_INSTANCE QUADSPI
|
||||
|
||||
#define USE_SDCARD
|
||||
#define USE_SDCARD_SDIO
|
||||
#define SDCARD_DETECT_PIN PD10
|
||||
#define SDCARD_DETECT_INVERTED
|
||||
|
||||
#define ENABLE_BLACKBOX_LOGGING_ON_SDCARD_BY_DEFAULT
|
||||
|
||||
|
||||
#define USE_TRANSPONDER
|
||||
|
||||
#define USE_MAX7456
|
||||
#define MAX7456_SPI_INSTANCE SPI4
|
||||
#define MAX7456_SPI_CS_PIN SPI4_NSS_PIN
|
||||
|
||||
#ifdef USE_DMA_SPEC
|
||||
//#define UART1_TX_DMA_OPT 0
|
||||
//#define UART2_TX_DMA_OPT 1
|
||||
//#define UART3_TX_DMA_OPT 2
|
||||
//#define UART4_TX_DMA_OPT 3
|
||||
//#define UART5_TX_DMA_OPT 4
|
||||
//#define UART6_TX_DMA_OPT 5
|
||||
//#define UART7_TX_DMA_OPT 6
|
||||
//#define UART8_TX_DMA_OPT 7
|
||||
#define ADC1_DMA_OPT 8
|
||||
#define ADC3_DMA_OPT 9
|
||||
//#define ADC2_DMA_OPT 10 // ADC2 not used.
|
||||
#else
|
||||
#define ADC1_DMA_STREAM DMA2_Stream0
|
||||
#define ADC3_DMA_STREAM DMA2_Stream1
|
||||
//#define ADC2_DMA_STREAM DMA2_Stream2 // ADC2 not used.
|
||||
#endif
|
||||
|
||||
#define USE_ADC
|
||||
#define USE_ADC_INTERNAL // ADC3
|
||||
|
||||
#define ADC1_INSTANCE ADC1
|
||||
#define ADC2_INSTANCE ADC2 // ADC2 not used
|
||||
#define ADC3_INSTANCE ADC3 // ADC3 only for core temp and vrefint
|
||||
|
||||
#define RSSI_ADC_PIN PC0 // ADC123
|
||||
#define VBAT_ADC_PIN PC4 // ADC123
|
||||
#define CURRENT_METER_ADC_PIN PC1 // ADC12
|
||||
#define EXTERNAL1_ADC_PIN PC5 // ADC12
|
||||
|
||||
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
|
||||
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
|
||||
|
||||
#define DEFAULT_RX_FEATURE FEATURE_RX_SERIAL
|
||||
#define DEFAULT_FEATURES (FEATURE_TRANSPONDER | FEATURE_RSSI_ADC | FEATURE_TELEMETRY | FEATURE_OSD | FEATURE_LED_STRIP)
|
||||
|
||||
#define TARGET_IO_PORTA 0xffff
|
||||
#define TARGET_IO_PORTB 0xffff
|
||||
#define TARGET_IO_PORTC 0xffff
|
||||
#define TARGET_IO_PORTD 0xffff
|
||||
#define TARGET_IO_PORTE 0xffff
|
||||
#define TARGET_IO_PORTF 0xffff
|
||||
#define TARGET_IO_PORTG 0xffff
|
||||
|
||||
#define USABLE_TIMER_CHANNEL_COUNT 19
|
||||
|
||||
#define USED_TIMERS ( TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(5) | TIM_N(8) | TIM_N(12) | TIM_N(15) )
|
||||
17
src/main/target/SPRACINGH7ZERO/target.mk
Normal file
17
src/main/target/SPRACINGH7ZERO/target.mk
Normal file
|
|
@ -0,0 +1,17 @@
|
|||
H750xB_TARGETS += $(TARGET)
|
||||
|
||||
HSE_VALUE = 8000000
|
||||
|
||||
EXST = yes
|
||||
|
||||
FEATURES += VCP ONBOARDFLASH SDCARD_SDIO
|
||||
|
||||
TARGET_SRC += \
|
||||
drivers/bus_quadspi_hal.c \
|
||||
drivers/bus_quadspi.c \
|
||||
drivers/max7456.c \
|
||||
drivers/accgyro/accgyro_mpu.c \
|
||||
drivers/accgyro/accgyro_mpu6500.c \
|
||||
drivers/accgyro/accgyro_spi_mpu6500.c \
|
||||
drivers/compass/compass_hmc5883l.c \
|
||||
drivers/barometer/barometer_bmp388.c \
|
||||
Loading…
Add table
Add a link
Reference in a new issue