Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-25 17:25:20 +03:00
Code Issues Wiki Activity

Merge pull request #10602 from tstibor/doc_report_cell_voltage

Browse source 
CLI name ibus_report_cell_voltage is replaced by report_cell_voltage
This commit is contained in:
Michael Keller 2021-05-21 02:31:53 +12:00 • committed by GitHub
commit dabe6343fc
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 2 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

2
docs/Cli.md
View file

@ -168,7 +168,7 @@ Click on a variable to jump to the relevant documentation page.
| `nav_speed_max` | GPS Navigation: maximum moving speed | 10 | 2000 | 300 | Profile | UINT16 | | `nav_speed_max` | GPS Navigation: maximum moving speed | 10 | 2000 | 300 | Profile | UINT16 |
| `nav_slew_rate` | GPS Navigation: maximum angle correction value. Lower slew rate stops the craft from rotating too quickly. | 0 | 100 | 30 | Profile | UINT8 | | `nav_slew_rate` | GPS Navigation: maximum angle correction value. Lower slew rate stops the craft from rotating too quickly. | 0 | 100 | 30 | Profile | UINT8 |
| `telemetry_switch` | When an AUX channel is used to change serial output & baud rate (MSP / Telemetry). OFF: Telemetry is activated when armed. ON: Telemetry is activated by the AUX channel. | OFF | ON | OFF | Master | UINT8 | | `telemetry_switch` | When an AUX channel is used to change serial output & baud rate (MSP / Telemetry). OFF: Telemetry is activated when armed. ON: Telemetry is activated by the AUX channel. | OFF | ON | OFF | Master | UINT8 |
| [`ibus_report_cell_voltage`](Telemetry.md) | Determines if the voltage reported is Vbatt or calculated average cell voltage (Flysky ibus telemtery) | OFF | ON | OFF | Master | UINT8 | | [`report_cell_voltage`](Telemetry.md) | Determines if the voltage reported is Vbatt or calculated average cell voltage. | OFF | ON | OFF | Master | UINT8 |
| [`telemetry_inversion`](Telemetry.md) | Determines if the telemetry signal is inverted (Futaba, FrSKY) | OFF | ON | OFF | Master | UINT8 | | [`telemetry_inversion`](Telemetry.md) | Determines if the telemetry signal is inverted (Futaba, FrSKY) | OFF | ON | OFF | Master | UINT8 |
| `telemetry_send_cells` | Emulates FrSky FLVSS individual cell voltages telemetry | OFF | ON | OFF | Master | UINT8 | | `telemetry_send_cells` | Emulates FrSky FLVSS individual cell voltages telemetry | OFF | ON | OFF | Master | UINT8 |
| `frsky_default_lattitude` | OpenTX needs a valid set of coordinates to show compass value. A fake value defined in this setting is sent while no fix is acquired. | -90 | 90 | 0 | Master | FLOAT | | `frsky_default_lattitude` | OpenTX needs a valid set of coordinates to show compass value. A fake value defined in this setting is sent while no fix is acquired. | -90 | 90 | 0 | Master | FLOAT |

2
docs/Telemetry.md
View file

@ -263,7 +263,7 @@ serial 1 1024 115200 57600 115200 115200
CLI setting to determine if the voltage reported is Vbatt or calculated average cell voltage CLI setting to determine if the voltage reported is Vbatt or calculated average cell voltage
``` ```
set ibus_report_cell_voltage=[ON/OFF] set report_cell_voltage=[ON/OFF]
``` ```
### Available sensors ### Available sensors