* Rescedule stats saving on disarm, if quad still moving
* Review suggestions by KarateBrot and Ledvinap
* Moved statsSaveMoveLimit under statsConfig_t
* Add APM32F4 driver libraries and USB middleware
* Add the APM32F405 and APM32F407 target files
* Add APM32 startup files
* Add APM32F4 linker files
* Add APM32F4.mk
* Add APM32 driver files
* Add APM32F40X MCU type
* Sync with the Betaflight master branch and modify the driver directory structure
* Implement CLI on the APM32
* Implement ADC on the APM32
* Implement config streamer on the APM32
* Implement I2C on the APM32
* Implement SPI on the APM32
* Implement DSHOT on the APM32
* Implement transponder ir on the APM32
* Implement serial uart on the APM32
* Implement MCO on the APM32
* Implement DWT on the APM32
* Update the init.c file, adding APM32 MCO configuration
* Remove all duplicated APM32 driver files and retaining only the APM32 LIB directory
* Create APM32F4.mk
* Add linker files for APM32F405 and APM32F407
* Add startup and library config files for APM32F405 and APM32F407
* Add target files for APM32F405 and APM32F407
* Add apm32 MCU driver files
* Add build configuration for APM32 MCU
* Implement config streamer on APM32
* Implement CLI on the APM32
* Implement ADC on the APM32
* Implement RCC on the APM32
* Implement MCO on the APM32
* Implement I2C on the APM32
* Implement SPI on the APM32
* Implement serial uart on the APM32
* Implement IO on the APM32
* Implement DMA on the APM32
* Implement DSHOT on the APM32
* Implement transponder ir on the APM32
* Update init.c
* Add the inclusion of the 'platform.h' file to the APM USB driver source file
* Merge bus SPI duplicate code from APM32 to STM32
* Update timer_apm32.c
* Merge motor duplicate code from APM32 to STM32
* Merge serial uart duplicate code from APM32 to STM32
* Update APM32F4.mk
* Update cli.c
* Update APM32F4.mk
* Remove the apm32_flash_f4_split.ld
* Associate the apm32 linker file with stm32_flash_f4_split.ld
If you add a new resource whose name starts with an existing resource name it won't be found. For example if you add `PWM_EX` resource after `PWM` you won't be able to store a pin into it. So when you execute `resource PWM_EX 1 A01` it will be stored into `PWM`.
* Disarm on landing
* Changes from review comments, thanks PL
* Sorry missed that one
* calculate Acc magnitude once only, not multiple times
* Include gyro factors as in crashRecovery
* Fix bug in CrashRecovery delta gains
Add temporary debugs to monitor error and delta inputs
* remove 1G subtraction for accMagnitude
thanks Karate
* Use AccDelta or Jerk - thanks Karate
* Revert using Gyro Setpoint and Delta
* Fix typo, thanks Mark
* increment PG version to 9
* Wing TPA gravity factor
* Small corrections according to ledvinap's review (not all yet)
* Some review changes for tpa_gravity
* using throttle after LPF to scale between thr0 and thr100
* tpa gravity further review and fixes
* tpa gravity: removed logging of pitch angle, since it's just pitch
* moved tpa_gravity to the end in pid.h
* KarateBrot review
Fixing issue #13664
Softserial port option has changed from 4.4.x to 4.5.0. By this the Smartaudio line is in an unknown voltage state while not TX is running - this violates the Smartaudio standard. vtx_softserial_alt should be set to OFF to use Smartaudio.
* CLEANUP: Move flash drivers to their own directory
* Missed flash_w25q128fv.h.
* Directories in #include, and specifying all source files explicitly.
* Revert RX driver src file implicit declaration
* Allow TPA_LOW to be negative (for wings)
* Fix minimax type
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* Range -128 to 127
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* Proper limits for TPA
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
* separate minmaxes for wing/without wing for TPA_LOW
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* Separate define for TPA_LOW_RATE_MIN
---------
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
* TPA delay in ms (for wings)
* Added comments for time constant
* ledvinap's suggestions
* tpaFactor local variable (based on ledvinap's suggestions)
* pt1FilterGainFromDelay with inlined calculations for cutoff (based on ledvinap's suggestions)
* Karatebrot extra review
* Pump PG for pidConfig_t
* Fixes based on review
* Moved tpaLpf to the end of pidRuntime_t
* Add support for W25N02K 2Gbit/256Mbyte FLASH
* Remove duplicate defintion check
* Rename W25N01G_BB_*_BLOCK macros
* Remove debug
* Create unified driver for W25N01G and W25N02K devices
* Put device parameters in a table
* Add W25N01GV to stacked die driver
* Do not enable features by default
* Enable OSD by default if included
* Enable OSD by default if included 2
* Fixes per review blckmn
* Add gate
* Only enable defined features
* No need for DEFAULT_FEATURES predefine
* No need for gating as we use featuresSupportedByBuild
* Fixes per review from ledvinap
* Features - refactor featureNames[]
Use designated initializers for used features. NULL values are stored
in gaps.
Use ARRAYLEN() for featureNames iteration
Use `unsigned` for bitmasks
* Features - add featuresSupportedByBuild
bitmask of features that are supported in current build
configuration. Copied from init.c sanitization
* Features - simplify feature sanitization code
featuresSupportedByBuild makes things much easier
* Features - improve cli feature handling
- refuse all features that are not compiled in
- AlreadyDisabled/AlreadyEnabled info
- refuse operation if multiple features match
* fixup! Features - improve cli feature handling
* Features - print available and not supported features separately
* Update src/main/cli/cli.c
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
* features - print full state without command
---------
Co-authored-by: Petr Ledvina <ledvinap@hp124.ekotip.cz>
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
