12842 commits

This branch

This branch

All branches

Author	SHA1	Message	Date
mikeller	77f0e106f6	Removed unnecessary cast.	2019-01-17 00:02:13 +13:00
Dominic Clifton	2627826cb7	Fix MSP flash read so it returns the actual bytes read from the flash, ... and not the amount of bytes requested, which may be different depending on the constraints of the flash chip used.	2018-12-06 12:18:25 +01:00
Michael Keller	25e1607292	Merge pull request #7175 from bnn1044/CLRACINGF7 ... CLRACING F7 add I2C support, and remove blackbox flash define	2018-12-06 21:29:47 +13:00
Michael Keller	fa7dabefc9	Merge pull request #7178 from mikeller/fix_url ... Fixed markdown for URL in README.	2018-12-06 14:55:23 +13:00
Michael Keller	1d6834281c	Fixed markdown for URL in README.	2018-12-06 13:22:13 +13:00
Michael Keller	08c6609b4b	Merge pull request #7176 from mikeller/add_4_0_postponement_note ... Added postponement note for Betaflight 4.0.	2018-12-06 13:12:49 +13:00
Cheng Lin	4b0ecb4c63	Edit .md file to match hardware	2018-12-05 10:32:03 -05:00
Michael Keller	3100264e86	Merge pull request #7157 from ethomas997/vtxSetGetFreqFix ... Fix SmartAudio 'looping' after vtx_freq in MHz set	2018-12-06 00:08:00 +13:00
Michael Keller	c6faec2a00	Merge pull request #7163 from TonyBlit/gps_vario_2 ... Numeric Vario calculated with GPS altitude	2018-12-06 00:07:05 +13:00
Michael Keller	a7d2852700	Merge pull request #7170 from wind0r/fix_bst_writeGpsPositionPrameToBST ... fix writeGpsPositionPrameToBST	2018-12-06 00:05:18 +13:00
Michael Keller	40164e7351	Merge pull request #7172 from TonyBlit/osd_gps_blink_2 ... OSD GPS indicator blinks when numSats is below 5	2018-12-06 00:04:35 +13:00
mikeller	f1b4eb48c3	Added postponement note for Betaflight 4.0.	2018-12-05 21:07:31 +13:00
Tony Cabello	6a6193551c	Numeric Vario calculated with GPS altitude	2018-12-05 09:01:53 +01:00
Cheng Lin	40247b0a1b	add I2C support, and remove blackbox flash define ... Signed-off-by: Cheng Lin <bnn1044@gmail.com> remove blackbox support	2018-12-04 20:43:16 -05:00
Michael Keller	c400186e70	Merge pull request #7078 from kmitchel/cascaded_dynamic_notch ... Cascaded dynamic notches.	2018-12-05 12:49:11 +13:00
Tony Cabello	93bf8b2186	OSD GPS indicator blinks when numSats is below 5	2018-12-04 09:19:45 +01:00
Michael Keller	46fa249f25	Merge pull request #7169 from jflyper/bfdev-fix-f411-clock-levels ... [F411,SYSTEM] Delete bogus clock PLL parameter table entry	2018-12-04 20:46:23 +13:00
Steffen Windoffer	1588a6a23d	fix writeGpsPositionPrameToBST	2018-12-03 16:35:50 +01:00
jflyper	ac02ee4cf2	Delete bogus clock pll entry	2018-12-03 22:52:23 +09:00
Michael Keller	b6408b3a32	Merge pull request #6714 from pkruger/4155-feature-for-osd-elements-on-a-switch ... 4155 feature for osd elements on a switch	2018-12-04 02:25:57 +13:00
Michael Keller	bb1e254d96	Merge pull request #7168 from mikeller/fix_arming_prevention_test ... Fixed arming prevention unittest.	2018-12-04 02:24:38 +13:00
mikeller	1784910aa8	Fixed arming prevention unittest.	2018-12-04 01:34:06 +13:00
Michael Keller	76e3722a17	Merge pull request #7159 from TonyBlit/gps_rescue_prevent_arm ... GPS Rescue: check failsafe procedure when preventing arming	2018-12-03 23:33:04 +13:00
Michael Keller	8eff13e8ab	Merge pull request #7160 from TonyBlit/gps_total_distance_speed ... Calculate distance flown with a speed threshold	2018-12-03 23:32:43 +13:00
Michael Keller	8e9462e251	Merge pull request #7158 from TonyBlit/gps_rescue_armed_check ... Arm prevention if Rescue is activated	2018-12-03 21:52:42 +13:00
Michael Keller	6566ec8ed6	Merge pull request #7151 from jflyper/bfdev-configurable--sdcard-spi-sdio ... [SDCARD,MSC] Switch USBD storage fops table according to sdcard config	2018-12-03 21:39:22 +13:00
Michael Keller	c119843785	Merge pull request #7162 from TonyBlit/gps_osd_blink ... Blink GPS indicator on OSD when numsats is lower than minimum configu…	2018-12-03 21:37:31 +13:00
Michael Keller	55a56cd522	Merge pull request #7148 from TonyBlit/osd_warn_rcsmoothing ... Added missing osd_warn_rc_smoothing in settings	2018-12-03 21:34:04 +13:00
Michael Keller	ec7204e4a5	Merge pull request #7154 from mikeller/fix_bmi160_gyro ... Fixed build dependency on EXTI for BMI160 driver.	2018-12-03 21:32:56 +13:00
E Thomas	1fbaca86b4	Fix 'looping' after vtx_freq in MHz set ... Added 'saGetSettings()' to saDoDevSetFreq() fn	2018-12-02 14:06:00 -05:00
Tony Cabello	84d2bc2c83	Arm prevention if Rescue is activated	2018-12-02 19:17:52 +01:00
Kenneth Mitchell	233ac7fb3f	Allow width=0 to select single notch. Restore dyn lpf mins.	2018-12-02 10:01:51 -05:00
Kenneth Mitchell	011eae93c6	Cascaded notch filters.	2018-12-02 09:52:02 -05:00
jflyper	0cf8679b5c	Switch USBD storage fops table according to sdcard config	2018-12-02 21:51:40 +09:00
Tony Cabello	d87e40725e	Calculate distance flown with a speed threshold	2018-12-02 06:49:46 +01:00
Tony Cabello	bdd57a6ce4	GPS Rescue: check failsafe procedure when preventing arming	2018-12-02 04:47:47 +01:00
Tony Cabello	8a15b128dc	Added missing osd_warn_rc_smoothing in settings	2018-12-02 04:37:18 +01:00
mikeller	ca5da2fdbb	Fixed build dependency on EXTI for BMI160 driver.	2018-12-02 10:50:15 +13:00
Michael Keller	3736a2486d	Merge pull request #7116 from jflyper/bfdev-status-command-refactor ... [CLI] Refactor status command to print things in more sensible order	2018-12-02 10:41:07 +13:00
jflyper	d4ac21cdc7	Refactor status command to print things in more sensible order	2018-12-01 22:21:58 +09:00
Pieter Kruger	8d981df1a9	Add OSD Profile feature - issue 4155	2018-12-01 17:51:38 +10:00
Tony Cabello	eadddf90af	Blink GPS indicator on OSD when numsats is lower than minimum configured for GPS Rescue	2018-11-30 05:54:34 +01:00
Michael Keller	8a4ea0785e	Merge pull request #7142 from mikeller/remove_use_multi_gyro ... Removed USE_MULTI_GYRO from targets that have it defined by default.	2018-11-29 19:28:54 +13:00
Michael Keller	ed86cd27e5	Merge pull request #7143 from etracer65/rc_smoothing_retraining_samples ... RC Smoothing: reduce retraining sample count	2018-11-29 19:28:41 +13:00
Michael Keller	d9da73a496	Merge pull request #7145 from etracer65/msc_osx ... Fixes to allow the MSC command with on-board flash to work on MacOS.	2018-11-29 19:26:47 +13:00
Michael Keller	2fd4589106	Merge pull request #7127 from jflyper/bfdev-KROOZX-use-pinio-for-OSD-channel-switch ... [KROOZX] Use pinio for OSD channel switch and move OSD_CH_SWITCH out of target.h	2018-11-28 23:52:35 +13:00
Michael Keller	4134c9c790	Merge pull request #7135 from jflyper/bfdev-move-hcsr04-default-pins-out-of-driver ... [RANGEFINDER_HCSR04] Move default pin defs out of driver file	2018-11-28 23:52:15 +13:00
Michael Keller	8300203dcd	Merge pull request #7141 from mikeller/amend_parameter_group_doc_again ... Amended parameter group documentation to include array length considerations.	2018-11-28 23:51:45 +13:00
jflyper	0f7d1ead97	Move default pin defs out of driver file	2018-11-28 14:07:49 +09:00
Bruce Luckcuck	a1899d671b	Fixes to allow the MSC command with on-board flash to work on MacOS. ... Fixed a bug in the STM libraries to set the write protected bin in the device config for the mass storage SCSI sense code 6 and 10. Previously the `isWriteProtected()` result was only being examined during write attempts and they correctly failed and returned a `NOT_READY` response (we don't support writes for SPIFLASH). Unfortunately since the device was not flagged as write protected on MacOS the operating system would try to write to the device and this would fail causing the operating system to think the device wasn't ready and refuse to mount it. General fixes: Ensured that the filesystem appears to be at least 256MB so that the volume will be treated as FAT32 instead of FAT16. A hidden "padding.txt" file is created to represent the extra space. Fix the directory structure to only create the "btfl_all.bbl" file if there were any logs found. Previously it would always be created and this would lead to directory corruption. Fix the size calculation for the "btfl_all.bbl" file. Previously it was being set to the total flash size rather than the used space.	2018-11-27 18:48:46 -05:00