* autopilot naming, function sharing
* initial position hold setup
* get current gps location
* first position hold draft
* basic control scheme
* add debug values for testing
* first working example with smoothed acceleration
* add deadbands
* Re-organise included files and functions thanks Karate
* revise PID gains
* PIDJ distance controller, not velocity based. Remove airmode check
* sanity check notes
* fix pid bug and improve iTerm handling
* calculate PIDs independently for each axis, increas DJ gains
* adjust pids and smoothing; smoothing cutoff to settings
* force iTerm to zero when close to target
* allow earth referencing in alt and pos hold
* stop activation until throttle raised, but not require airmode
use wasThrottleRaised in place of isAirmodeActivated where airmode isn't really needed
* remove unnecessary debug
* block arming if poshold or althold switches are on
* basic sanity check and OSD warning
* allow user to fly without mag only if they reverse the default
* separate alt and pos hold deadbands
if poshold deadband is zero, sticks are ignored
if user tries to enable posHold and it can't work, they get stick with a deadband
* try to prevent position hold if no mag without valid IMU
fixes a bug in the last commit, also
* retaisn iTerm just attenuate the output
* struct for values
* reset position at start when slowed down, retain rotated iTerm back
* resolve bounceback and remove iTerm attenuation
* adjust PID gains to 30
* force unit tests sto work
* tidy up after merge
* Use mpif
* conditionally only do compass check if Mag is defined
* fixe defines and remove const
* comments to explain strange rc multiplier
* fix small omission when refactoring after throttle raised PR
* licence updates, refactoring from review comments
* fix issues when pos hold deadband is set to zero
* A for acceleration element, not J
* compact the posHoldUpdate() function - thanks K
* rename showPosHoldWarning to posHoldFailure
* Use a function in gps.c to initate the posHold activity on new GPS data
* Use autopilotAngle in place of posHoldAngle
* separate function for gpsHeading truth
* use FLIGHT_MODE(POS_HOLD_MODE) in place of isPosHoldRequested
* removed non-required definitions
* fix failure to initiate position hold from error in ifdef
* refactoring from reviews, rename posHoldReset
* move deadbands for pos and alt hold to their config files.
* comment
* fix for blackbox breakup of GPS values
reverts use a function in gps.c to initate the posHold activity on new GPS data
* fix for msp change for posHoldConfig
* try to constrain aggressiveness at start, smaller deadband
* allow greater overshoot at the start for high incoming speed
rename justStarted to isDeceleratingAtStart
* dynamically update smoothing at the start
* retain iTerm when moving sticks, to keep attitude in the wind
* fix unit tests
* finally retain iTerm correctly while moving sticks, but reset at start
* Fix iTerm reset and parameter rotation
* absolute rotation vs incremental rotation, fix spike after resetting target location
* don't rotate D or A, it reverses their sign inappropriately
* Block yaw, allow in CLI, option to apply yaw correction code
* restore debug
* calc D from groundspeed and drift angle
* add back some target based D
* Earth Frame iTerm vector
appears to work :-)
* fix unit test
* lower PID gains, slowly leak iTerm while sticks move
* earth ref Dterm, not from GPS Speed
smoother than using GPS Speed and heading
* stronger PIDs
* adjust debug
* shoehorn the unit tests
* Proper earth referencing, at last
* clean up a bit
* no need to duplicate wrapping done in sin_approx
* add note about PT1 gain on PT2 filters
* avoid unnecessary float conversions
* Remove unnecessary CLI testing params
* update PID gains, stronger tilt angle correction
* improved distance to target. thanks to demvlad
* Terminate start individually on each axis
added comments
* refactoring to avoid code duplication
* implement reviews, reduce PID gains
* upsampling filter at 5Hz
* warn if posHold mode requested but throttle not above airmode activation point
* disable angle feedforward in position hold
* rebase, pass unit test
* sequential PT1's, refactoring from reviews
* PID and filter revision
* bane of my life
* lenient sanity check, message for noMag, possible DA vector limit code
* replace angleTarget in pid.c only when autopilot is active
* rearrange status checks
* fix debug, tidy up EF axis names, add comments about sign and direction
* stop more cleanly, easier sanity check, phases, debugs complete
* extend sanity check distance while sticks move; refactor; comments
* fix instability on hard stop, allow activation after arming but before takeoff
* make altHoldState_t local, getter to pass unit tests.
* hopefully the last cleanup of this test file
* implement review from PL - thank you!
* restore angle limiting in pid.c , max of 80 degrees allowed in CLI
* fixes after review changes weren't right
* fix braces
* limit max angle to 50 by vector length
* Fix curly brackets, comments and debug mistake
* in autopilot modes, allow up to 85 deg for pos hold
* limit pilot angle in position hold to half the configured position hold angle
* use smaller of angle_limit or half the autopilot limit
* increase alt_hold sensitivity 5x and narrow deadband to 20
* make altitude control 5x stronger with narrower deadband and new name
* add suggestions from recent reviews
* start autopilot gpsStamp at 0
* renaming variables
* reset the upsampling filters when resetting position control
* improved gpsStamp thanks PL
Also cleanup names and notes
* simplify altitude control
* rename to GPS_distances to GPS_latLongVectors
* alt_hold respect zero deadband, hold when throttle is zero
* remove unused debug
* fix unit test
* re-name variables in alt_hold and update comments
* more flexible limit on target vs current altitude
* updates from reviews, thanks karate
* review changes from PL
* more updates from PL review
* rationalise GPS_latLongVectors
* remove static newGpsData and rescueThrottle
* Thanks, PL, for your review
* Modifications, but has a big twitch when sticks stop
* Re-naming, fix the twitch, minor changes
* remove unnecessary unit test reference
* sanity dist to 10m at full stop, send task interval for upsampling filter
* vector and parameter re-name
Co-Authored-By: Jan Post <19867640+KarateBrot@users.noreply.github.com>
* small changes from review
Co-Authored-By: Mark Haslinghuis <8344830+haslinghuis@users.noreply.github.com>
Co-Authored-By: Petr Ledvina <2318015+ledvinap@users.noreply.github.com>
* comment PL
Co-Authored-By: Petr Ledvina <2318015+ledvinap@users.noreply.github.com>
* fix ltm alt_hold flightMode
* NOINLINE some pid.c functions
* Revert "NOINLINE some pid.c functions"
This reverts commit 56a3f7cec2.
* fast_code_pref the wing functions in pid.c
* use fast_code_pref where won't break the build
* apply fast_code_pref correctly
* NOINLINE some pid.c functions
FAST_CODE_PREF for updatePIDAudio
add comment to FAST_CODE_PREF
FIx platform.h unit test issue
Wing functions all FAST_CODE_PREF
* revert FAST_CODE_PREF changes
* Reduce ITCM RAM footprint considerably
* multiple name changes and some refactoring
Thanks, PL
* small editorial change
* refactoring, thanks PL
Co-Authored-By: Petr Ledvina <2318015+ledvinap@users.noreply.github.com>
* 64 bytes to check crossing 180 deg longitude
Co-Authored-By: Petr Ledvina <2318015+ledvinap@users.noreply.github.com>
* try to fix build error
Co-Authored-By: Petr Ledvina <2318015+ledvinap@users.noreply.github.com>
* Revert "try to fix build error"
This reverts commit f926d26021.
* just guessing here
* Revert "just guessing here"
This reverts commit ebc240a325.
* use a null location at initialisation
* Revert "use a null location at initialisation"
This reverts commit b51ae1395d.
* revert more compact initialisation code due to SITL error otherwise
* fix wrapping when 180 lon meridian is crossed
* null location option from PL
* Revert "null location option from PL"
This reverts commit ad40e979bd.
* refactor PosHold start/stop code
* move Alt_Hold and Pos_Hold warnings ahead of Angle, update some comments
* use setTargetLocationByAxis, fix comments
* change from karatebrot review
Co-Authored-By: Jan Post <19867640+KarateBrot@users.noreply.github.com>
* things still to do
Co-Authored-By: Jan Post <19867640+KarateBrot@users.noreply.github.com>
* keep warning strings 12 or less characters
Co-Authored-By: Jan Post <19867640+KarateBrot@users.noreply.github.com>
* a few more
Co-Authored-By: Jan Post <19867640+KarateBrot@users.noreply.github.com>
---------
Co-authored-by: Jan Post <19867640+KarateBrot@users.noreply.github.com>
Co-authored-by: Mark Haslinghuis <8344830+haslinghuis@users.noreply.github.com>
Co-authored-by: Petr Ledvina <2318015+ledvinap@users.noreply.github.com>
Co-authored-by: Jay Blackman <blckmn@users.noreply.github.com>
* Driver for CADDX camera GM3 gimbal
* Update src/main/cli/settings.c
Fix copy-paste error on variable name.
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/gimbal_control.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/gimbal_control.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Update src/main/io/gimbal_control.c
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* Only forward gimbal data with good CRC
---------
Co-authored-by: Petr Ledvina <ledvinap@gmail.com>
* serial - refactor serial resource handling
- port related resources (tx/rx/inverted,dma)
- are stored sequentially, with space in place of ports that are not
enabled (RESOURCE_UART_COUNT + RESOURCE_LPUART_COUNT +
RESOURCE_SOFTSERIAL_COUNT)
- RESOURCE_UART_OFFSET, RESOURCE_LPUART_OFFSET, RESOURCE_SOFTSERIAL_OFFSET
- resource entries are pointing into this array (UART, LPUART, SOFTSERIAL)
- both pins and DMA
- inverter is supproted only for UART + LPUART (makes sense only
for UART, to be removed)
- softSerialPinConfig is removed, it is no longer necessary
- serialResourceIndex(identifier) is used universally to get correct
index into resource array
- unified handling of resources where possible
- serialOwnerTxRx() + serialOwnerIndex() are used for displaying resources
correctly to user.
- serialType(identifier) implemented
- serialOwnerTxRx / serialOwnerIndex are trivial with it
- large switch() statemens are greatly simplified
* serial - merge code duplicated in all UART implementations
- drivers/serial_uart_hw.c contains merged serialUART code.
Code did not match exactly. Obvious cases are fixed, more complicated
use #ifs
- pin inversion unified
- uartOpen is refactored a bit
* serial - refactor uartDevice
- use 'compressed' enum from uartDeviceIdx_e. Only enabled ports are
in this enum.
- uartDeviceIdx directly indexes uartDevice (no search necessary, no
wasted space)
- use `serialPortIdentifier_e identifier;` for uartHardware
- for DMA remap, define only entries for enabled ports (uartDeviceIdx_e
does not exist disabled port)
* serial - apply changes to inverter
New implementation is trivial
* serial - HAL - rxIrq, txIrq replaces by irqn
There is only one IRQ for serial
* serial - serial_post.h
Generated code to normalize target configuration.
jinja2 template is used to generate header file. Port handling is
unified a lot.
SERIAL_<type><n>_USED 0/1 - always defined, value depends on target configuration
SERIAL_<type>_MASK - bitmask of used ports or given type. <port>1 is BIT(0)
SERIAL_<type>_COUNT - number of enabled ports of given type
SERIAL_<type>_MAX - <index of highest used port> + 1, 0 when no port is enabled
* targets - remove automatically calculated valued from configs
serial_post.h generated it
* serial - remove definitions replaced by serial_post.h
* serial - change LPUART to UART_LP1 in places
LPUART is mostly handled as another UART port, this change reflects it
* serial - use ARRAYLEN / ARRAYEND in some places
replaces constant that may not match actual array size
* serial - adapt softserial to changes
* serial - whitespace, comments
* softserial - fix serialTimerConfigureTimebase
* serial - suspicious code
* serial - unittests
* serial - cleanup
* serial - simpler port names
Is this useful ?
* serial - no port count for SITL necessary
* serial - fix unittests
include serial_post.h, some ports are defined, so normalization will
work fine
* timers - remove obsolete defines from SITL and unittests
* serial - cosmetic improvements
comments, whitespace, minor refactoring
* serial - fix serialInit bug
serialPortToDisable was preventing further tests
* serial - fix possible NULL pointer dereference
* serial - move serialResourceIndex to drivers
* serial - refactor pp/od and pulldown/pullup/nopull
Centralize serial options handling, decouple it from MCU type
Move some code into new drivers/serial_impl.c
* serial - make port.identifier valid early in port initialization
* serial - fix unittest
Code is moved around a bit to make unittests implementation easier
* serial - bug - fix off-by-one error
uart1/softserial1/lpuart was not working properly because of this
* serial - whipespace + formating + style + comments
No functional changes
* utils - add popcount functions
Wrap __builtin_popcount for easier use. Refactor existing code using
it. Update code using BITCOUNT macro in dynamic context (BITCOUNT is
for compile-time use only)
* serial - inverter - simplify code
* pinio - prevent array access overflow
* serial - refactor SERIAL_BIDIR_*
SERIAL_BIDIR_OD / SERIAL_BIDIR_PP
SERIAL_PULL_DEFAULT / SERIAL_PULL_NONE / SERIAL_PULL_PD
* serial - simplify code
minor refactoring
- cleaner AVOID_UARTx_FOR_PWM_PPM (unused anyway)
- serialFindPortConfiguration* - remove code duplication
- use serialType in smartaudio
* serial - add port names
- const string is assiociated with each compiled-in port (easy to pass around)
- findSerialPortByName
* cli - improve serialpassthrough
- support port options (in current mode argument)
- support port names (`serialpassthrough uart1`)
- improve error handling; check more parse errors
* cli - resources - minor refactor
- prevent SERIAL_TX_NONSENSE when parsing resource type
- fix possible NULL pointer dereference
- store resource tag only after checking all conditions
- slighty better error reporting
- `resource serial_tx 1` will print resource assignment
* serial - remane pulldown to SERIAL_PULL_SMARTAUDIO
Make sure nobody uses it by
mistake. SERIAL_PULL_SMARTAUDIO_SUPER_DANGEROUS_USE_AT_YOUR_OWN_RISK_THIS_WILL_BREAK_EVERYTHING_AND_KILL_YOUR_PET_FISH
would be better choice, but try shorter version first.
* smartaudio - minor refactor/improvement
- Fix softserial on AT32
- make it easier to handle SA on per-cpu basis
* softserial - minor refactoring
no functional changes
* UART - move AF handling before MCU dependent code
* UART - adapt APM32 / APM32F4 code
- Modeled after F4 where possible
- come code moved from APM32 to APM32F4, possbily not necessary, but
it improves similarity with STM32F4
* UART - APM32 - remove per-pin AF
* UART - APM32 - bugfix - fix pinswap #if conditions
* UART - apply some improvemnts from APM32 to STM32
* UART - add todo for F4 serial speed
* UART - fix typo
* UART - refactor support for USE_SMARTAUDIO_NOPULLDOWN
* UART - typos, comments, minor improvements
* UART - move code into enableRxIrq
TODO: split into mcu-specific filer (but in sepatate PR)
* UART - add UART_TRAIT_xx
makes #if test easier and more consistent
more traits shall follow
* UART - fix variable name
unused branch, would trigger compilation error otherwise
* UART - use tables instead of switch
* UART - smartaudio
minor style change + better comments
* UART - unify mspPorts iteration
* UART - fix spelling
* UART - another typo
* UART - fix serialResourceIndex
offset must be added, not subtracted
offset can be negative
* UART - fix typo
Bad day ...
* UART - use const table
GCC does optimize it better.
Should not cause functional change
* UART - use OwnerIndex for inverter
- 1 based
- only UART has inversion
* UART - refactor serial_resource a bit
Single table + helper function. New table is easier to read
* UART - serial_impl header is necessary
* UART - style-only changes
typos
unify whitespace
comment improvement
add some const modifiers
use cfg in uartConfigureDma
minor improvemnt of for loops
* UART - remove LPUART inverter
LPUART always supports internal inversion, code was incomplete and
unused
* UART - update jinja template, regenerate files
* UART - enable UART module RCC clk before configuring DMA
Does not change anything, UART RCCs are enabled unconditionally
* Altitude control code shared
fewer debugs
subtract D
* remove #include comments, simplify coding, restructuring
thanks JP and MH
* fix cms limits for throttle control
* Use altitude_control debug, fix throttle calculation
minor refactoring
* use AUTO_CONTROL_ALTITUDE debug in place of GPS Rescue throttle pid
* use autopilot for position control names
* fixes from reviews - thanks
* Re-organise included files and functions thanks Karate
* missed init and other typos
* remove old unused unit test file, tidy up thanks Mark
* fix indentation on one line
* Add APM32F4 driver libraries and USB middleware
* Add the APM32F405 and APM32F407 target files
* Add APM32 startup files
* Add APM32F4 linker files
* Add APM32F4.mk
* Add APM32 driver files
* Add APM32F40X MCU type
* Sync with the Betaflight master branch and modify the driver directory structure
* Implement CLI on the APM32
* Implement ADC on the APM32
* Implement config streamer on the APM32
* Implement I2C on the APM32
* Implement SPI on the APM32
* Implement DSHOT on the APM32
* Implement transponder ir on the APM32
* Implement serial uart on the APM32
* Implement MCO on the APM32
* Implement DWT on the APM32
* Update the init.c file, adding APM32 MCO configuration
* Remove all duplicated APM32 driver files and retaining only the APM32 LIB directory
* Create APM32F4.mk
* Add linker files for APM32F405 and APM32F407
* Add startup and library config files for APM32F405 and APM32F407
* Add target files for APM32F405 and APM32F407
* Add apm32 MCU driver files
* Add build configuration for APM32 MCU
* Implement config streamer on APM32
* Implement CLI on the APM32
* Implement ADC on the APM32
* Implement RCC on the APM32
* Implement MCO on the APM32
* Implement I2C on the APM32
* Implement SPI on the APM32
* Implement serial uart on the APM32
* Implement IO on the APM32
* Implement DMA on the APM32
* Implement DSHOT on the APM32
* Implement transponder ir on the APM32
* Update init.c
* Add the inclusion of the 'platform.h' file to the APM USB driver source file
* Merge bus SPI duplicate code from APM32 to STM32
* Update timer_apm32.c
* Merge motor duplicate code from APM32 to STM32
* Merge serial uart duplicate code from APM32 to STM32
* Update APM32F4.mk
* Update cli.c
* Update APM32F4.mk
* Remove the apm32_flash_f4_split.ld
* Associate the apm32 linker file with stm32_flash_f4_split.ld
* CLEANUP: Move flash drivers to their own directory
* Missed flash_w25q128fv.h.
* Directories in #include, and specifying all source files explicitly.
* Revert RX driver src file implicit declaration
* Fix escserial for HAL targets.
* Remove the code disabling ESCSERIAL for F7.
* Timer/StdPeriph - Add an implementation of 'timerReconfigureTimebase'.
Simply calls the `configTimeBase`, seemed cleaner than adding #ifdef USE_HAL_DRIVER everywhere instead.
GPIO alternate function removal for HAL.
The all timer initialisation was actually not required as the initialisation is located where needed (previously required for STD PERIPH / AT32). The previous for loop excluded the actual setup in any case as all the full timer hardware items where TIM_USE_ANY.
* Add gps lap timer
* change timing to GPS time instead of local time
* rebase and minor changes
* implement KarateBrot's suggestions
* follow ledvinap's suggestions, some OSD symbol changes
* move platform.h include to the top
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
* fix osd elements not showing, remove useless block
* cleanup, move pg stuff to pg folder
* cleanup from review
* minor mods to gps lap timer update, add number of laps tracked
* rename time variable
* add const to timeMs
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
* Update licenses, add is_sys_element macro
* update licenses
* round to nearest centisecond
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
---------
Co-authored-by: Jan Post <Rm2k-Freak@web.de>
* FIX: Several build issues following configuration changes
1. RX_SPI pins undefined
2. SDCARD enabled but no utilisation (i.e. no blackbox selected).
* Improved readability (readiness for "black" macro magic)
* Adding Makefile rule to enable CI targets to include Configured targets
Remove USE_SWDIO, simply refer to debug
Command line of `make TARGET=STM32F405 DEBUG=GDB` will trigger this.
Alternative is simply `make TARGET=STM32F405 EXTRA_FLAGS="-DDEBUG"`
* Method for adding defaults using defines for resources.
* As we will always be using the fullTimerHardware, we just need to configure the pin mapping.
This is done in the config.h as
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP(0, PA0, 1, 0) \
TIMER_PIN_MAP(0, PA1, 1, 0)
timerHardware[] dependencies to be removed in another PR
* Adding missing pin definitions (removing dependency on timerHardware)
* Typo
* In case MOTOR1_PIN is not defined, but a motor is configured
* Tidy up of AT Timer Definitions
* Removed unnecessary F1 code.
* Remove some STM specific define logic from init.c
* As per renaming suggestion from @klutvott123
* STM32H730/STM32H750 - Fix use of USE_LP_UART1 instead of USE_LPUART1.
* STM32H723 - Prepare for being able to build for using non-internal-flash
config storage.
* STM32H723 - Prepare for using non-default strings.
* STM32H723 - Disable 'use custom defaults' when using USE_EXST.
* STM32H723 - Disable CUSTOM_DEFAULTS_EXTENDED when EXST is used.
* OCTOSPI - Add initialisation code.
* Add support for RAM_CODE.
* STM32H730 - Add support for RAM_CODE via the .ram_code attribute.
* OCTOSPI - Proof-of-concept for disabling/enabling memory mapped mode on
a running system.
NOTE: The HAL libs are compiled into a memory mapped region, and this cannot be used for OctoSPI access when memory mapped mode is disabled.
* OCTOSPI - Drop HAL support after determining that it's not suitable for
the memory mapped flash use-case.
* OCTOSPI - Sometimes, when disabling memory map mode, the abort fails.
Handle this by disabling the OSPI peripheral first and re-enabling it
afterwards.
* SD/FLASH - Update comments regarding possible solutions to the catch-22
issue with SD/SPI/QUADSPI/OCTOSPI pin configurations.
* OCTOSPI - Use device instance directly.
* OCTOSPI - Prepare W25Q flash driver for octospi support.
* OCTOSPI - Add octospi flash detection.
Note: The method to detect flash chips is similar to the method used for
QUADSPI and as such the code was used as a base. However the initial
OCTOSPI implementation doesn't support the non-memory-mapped use-case so
the un-tested code is gated with `USE_OCTOSPI_EXPERIMENTAL`.
The key differences are:
* uses octospi api not quadspi api.
* flash chip clock speeds should not be changed for memory-mapped flash
chips, bootloader already set it correctly.
* only certain flash chips are capable of memory mapped support.
* W25Q - Ensure w25q128fv_readRegister returns 0 if the receive fails.
* OCTOSPI - Implement octoSpiTransmit1LINE, octoSpiReceive1LINE and
octoSpiReceive4LINES.
* OCTOSPI - Specify device from init.
* OCTOSPI - More fixes and work on init.
Current status is that memory mapped mode is disabled and flash chip is
detected, but w25q128fv_detect should not be calling w25q128fv_reset.
* FLASH - Add comment regarding wasted flash space on targets that only
use one bus type for the flash chip.
* FLASH - Split `detect` into `identify` and `configure`.
* OCTOSPI - Extract flashMemoryMappedModeEnable/Disable to separate
methods.
* FLASH - Reduce size of targets that don't support the use of multiple
flash interfaces.
* Single-flash-chip targets usually only support one type of io
interface.
* Without this, compiler warnings are generated in `flashSpiInit` for
targets that only use flash chip drivers that support quadspi or octospi
that don't even use SPI for flash.
* FLASH - Use MMFLASH_CODE/DATA to conditionally move code/data to RAM.
Only targets compiled to support memory mapped flash chips need the some
specific code in RAM. Otherwise the code/data should be in the normal
linker section.
* FLASH - W25Q Prepare for memory mapped flash usage.
* Wait/Delay functions must work with interrupts disabled.
* Code used for reading/writing must run from RAM.
* OCTOSPI - Implement remaining required methods.
* OCTOSPI - Fixes for earlier code (not last commit).
* FLASH - W25Q update timeout values from Datasheet Rev L.
* FLASH - Prepare flash driver for use when memory mapped flash is
disabled.
* System - Prepare microsISR for use when memory mapped flash is disabled.
* FLASH - Add support for CONFIG_IN_MEMORY_MAPPED_FLASH.
* Flash - Fix incorrect gating on cli flash commands.
When compiling with USE_FLASH_CHIP and without USE_FLASHFS there were
compiler warnings.
* MMFLASH - Fix release-mode build.
* FLASH - Allow SPI pins to be reconfigured when using CONFIG_IN_MEMORY_MAPPED_FLASH.
MMFLASH only works via QuadSPI/OctoSPI peripherals.
* EXST - Disable the 2GB workaround which is now causing a different
error.
The error we get with 'remove-section' enabled is:
"error in private header data: sorry, cannot handle this file". The
cause of this new error in the objcopy codebase is an out of memory
condition, somehow the 2GB files and this error are related but the root
cause of both is still unknown.
* OCTOSPI - Add support for STM32H723.
* STM32H723 - Add linker scripts for EXST usage.
* NucleoH723ZG - Add build script to demonstrate OCTOSPI and Memory Mapped
flash support.
* FLASH - WUse the size in bits to set the size of the buffer.
* FLASH - Fix typo in W25N driver defines.
Was using W28N instead of W25N
* OCTOSPI - Fix missing semilcolon when compiling without
USE_FLASH_MEMORY_MAPPED.
* OCTPSPI - Fix missing call to 'memoryMappedModeInit'.
* SPRacingH7RF - Add example build script to allow for testing prior to
unified target / cloud-build support.
* AT32F435: new target (#12159)
* AT32F435: New target (WIP)
* IO and Timer Updates
* Adding pseudonyms for the STM TypeDef items.
- implementation to follow
* Adding config_streamer support for AT32
* Implementation for IO
* Adding in Peripheral mapping from emsr.
* Warnings cleanup for AT drivers
* Getting things to the linking stage
* Add AT-START-F435 LEDs as default in AT32F435 as a temporary measure to aid bringup
* Remove tabs
* Enable selection of serial port to use for MSP
* Setup defaults for AT-START-F435 to use MSP on UART1
* Fix for most recent 4.5.0 Makefile changes
* Solve for sanity check.
* Add AT32F435 MCU type
* Fix compilation issue with SITL
* Merge conflict resolution
* Minor cleanup
* Adding line feed.
---------
Co-authored-by: Steve Evans <Steve@SCEvans.com>
* Missing define to activate TABLE_VIDEO_SYSTEM
* USE_PWM should only be for RX (parallell RX inputs), USE_PWM_OUTPUT is for all others.
* Updated gate naming so there is less confusion
* Simplified. Note there maybe further occurences.
