Mirror/betaflight
1
0
Fork 0
mirror of https://github.com/betaflight/betaflight.git synced 2025-07-23 16:25:31 +03:00
Code Issues Wiki Activity
3504 commits 10 branches 287 tags 502 MiB
Commit graph

30 commits

Author SHA1 Message Date
borisbstyle
8ecd05b911 Configurable Beeper PIN6 CC3D // Less CC3D targets 2015-12-23 00:05:33 +01:00
4712
02b297afa7 Runtime ESC count / gpio / pin detection 
Runtime ESC gpio/pin detection
Runtime ESC count detection
 2015-11-13 18:32:57 +01:00
borisbstyle
4b3ba927e9 Merge branch 'master' into betaflight 
Conflicts:
	src/main/blackbox/blackbox_io.c
	src/main/drivers/serial_usb_vcp.c
	src/main/flight/imu.c
	src/main/mw.c
	src/main/target/CC3D/target.h
 2015-10-12 23:53:43 +02:00
Petr Ledvina
8f3d9fae9a unify typedef struct name_s {} name_t; naming convention 2015-10-12 19:58:12 +01:00
borisbstyle
77534ed6f6 Merge remote-tracking branch 'henn1001/FastPWM' into betaflight 
Conflicts:
	src/main/drivers/pwm_mapping.c
 2015-10-01 16:01:15 +02:00
Dominic Clifton
5d5fd81b2e Fix bug where PPM rx stops working on sparky or CC3D when using motor 
PWM rate > 500 (brushed motor mode).

Fix is the same as for OneShot since both brushed motors and oneshot use
an 8mhz timer.

Fixes #58
 2015-09-09 19:25:08 +01:00
henn1001
7bd79e159c quick implementation of fastpwm 2015-08-11 01:56:32 +02:00
Dominic Clifton
7b91524ba2 Replace gimbal_flags with FEATURE_CHANNEL_FORWARDING and gimbal_mode. 
Gimbals are only one use of channel forwarding, PWM video switchers and
PWM buzzers are others.
 2015-07-08 16:41:29 +01:00
Dominic Clifton
9a8a31676b Reduce maximum servos from 10 to 8. 
1) the 2 extra servos were not used for anything, yet.
2) the MSP packet to set ALL the servo configurations in one go is
larger than the MSP input buffer size.

Likely the MSP_SET_SERVO_CONF should be updated with command that takes
an index of a servo to configure, as per mode ranges/colors/leds/etc.

Fixes #1002
 2015-06-10 13:31:04 +01:00
Dominic Clifton
4ed6fdfea5 CC3D - Add sonar. 
This also ensures that the PWM mapping does not use the sonar pins when
sonar is enabled in a board agnostic way.
Conflicts:
	src/main/config/config.c
	src/main/drivers/pwm_mapping.h
	src/main/main.c
	src/main/target/CC3D/target.h
 2015-05-22 22:35:41 +01:00
Dominic Clifton
20a6f829d5 SPRacingF3 - Add support for airplane pwm mappings. 2015-05-21 02:02:33 +01:00
Dominic Clifton
b04be157b1 SPRacingF3 - Allow Sonar and Parallel PWM (drops 2 input channels). 
Naze32 - Fix initialisation of outputs 5/6 when Parallel PWM and
Sonar are used together with a mixer that needs more than 4 motors.
 2015-05-06 21:33:34 +01:00
Dominic Clifton
c0aec95e14 STM32F303 - Skip UART3 pins in PWM mapping when UART3 is used. 2015-05-06 20:38:39 +01:00
Dominic Clifton
9057d70410 Allow excluding of servo code at compilation time. 
This is in preparation for backbox on CJMCU/64k.

Flight tested on CJMCU.
 2015-02-22 16:21:03 +00:00
Dominic Clifton
650389afb6 Disable ADC initialisation on CJMCU. Replace MASSIVEF3 with SPRACINGF3. 
Conditional VCP code inclusion.  Other minor F1/F3 cleanups.
 2015-01-20 23:33:03 +01:00
Dominic Clifton
abe4fbbaae Merge branch 'PWM_mapping' of https://github.com/MJ666/cleanflight into MJ666-PWM_mapping 
Conflicts:
	src/main/main.c
 2014-12-26 18:51:40 +00:00
Michael Jakob
4b0d5e7e15 Use same PWM mapping for PPM and Serial RX 
Without this fix an Octocopter with serialh RX will not work. Standard
 receiver mapping with only 6 motors outputs will apply.
 2014-12-15 07:46:47 +01:00
Dominic Clifton
e802e2d032 Remove usage of feature() from pwm driver code so that driver code does 
not have a dependency on config.c.
 2014-12-06 11:39:31 +00:00
Ben Hitchcock
94c5573c39 Allowing oneshot125 functionality to work on a Naze board. 
This code has been flight tested, but will have problems on a CC3D board, and also when the looptime is longer than 8200 uS.
 2014-11-29 14:06:35 +08:00
Petr Ledvina
57c308538f Whitespace cleanup 
Misplaced whitespace fixed, no functional changes
 2014-11-24 21:39:25 +01:00
Petr Ledvina
bf50cbb1a8 NVIC priority change 
Use 'better' macros to handle priority. This simplifies passing priority to function and new ATOMIC_BLOCK macro
 2014-11-04 16:23:21 +01:00
Pierre-A
d0ec471d03 Current monitoring on CC3D 2014-10-21 20:30:40 +02:00
Dominic Clifton
41ff2e8d0e CC3D - Add support for battery voltage monitoring on S5_IN. 
See docs for further details.
 2014-09-19 21:16:40 +01:00
Dominic Clifton
d60183d91d Normalize all the line endings 2014-09-15 23:40:17 +01:00
Dominic Clifton
3d382ea4c7 EUSTM32F103RC - First cut of support for this High-Density STM32F103 
series development board.

These boards can be picked up for less than $11, coupled with a 10DOF
sensor board they make a great development platform or cheap expandable
FC.

Pretty much all pins are available to be used, unlike on the less
capable and more expensive OLIMEXINO.
 2014-09-03 01:38:27 +01:00
Dominic Clifton
fd59a4cd52 Update mixer to use servo count from results of pwm mapping. 
Also ensure that only aux channels for which there are available servos
are used when forwarding channels.

Removed magic number usage.
 2014-06-11 19:13:40 +01:00
Dominic Clifton
1730e3dfd3 Relocated led strip user code into separate file. 
Added documentation.

Added LED_STRIP feature, can only be enabled under certain circumstances
depending on target due to pin/timer mappings - see documentation.
 2014-06-09 19:11:31 +01:00
Dominic Clifton
e867af8c4b Correct project name in GPL notices. 2014-06-05 00:47:47 +01:00
Dominic Clifton
0bbcd6570f Updated source files to include the GPL v3 notices. Include a copy of 
the GPL v3.
 2014-06-04 16:48:23 +01:00
Dominic Clifton
d19a5e7046 Cleanup project structure. Update unit test Makefile to place object 
files in obj/test
 2014-05-31 22:43:06 +01:00
Renamed from src/drivers/pwm_mapping.h (Browse further)