5271 commits

Author	SHA1	Message	Date
Raphael Coeffic	9681929f98	tramp: re-enabled temperature support ... Temps have been measured right on the STM32F031G6 located on the surface of the Tramp and seem to be quite accurate. Above 104C, it starts to trickle the power down.	2017-01-16 12:00:36 +01:00
Raphael Coeffic	47bbd46c88	added conditional debug (TRAMP_DEBUG)	2017-01-15 23:26:08 +01:00
Raphael Coeffic	af72b761b5	fixed pre-processor directives (continued)	2017-01-15 23:18:38 +01:00
Raphael Coeffic	99cff4a875	some clean-up work (@ledvinap comments)	2017-01-15 18:34:14 +01:00
Raphael Coeffic	07659576b1	fixed pre-processor directives	2017-01-15 14:11:49 +01:00
Raphael Coeffic	c29f8a79ed	use separate serial functions for SmartAudio and Tramp.	2017-01-15 12:22:18 +01:00
Raphael Coeffic	56c8fb0183	re-enabled VTX_SMARTAUDIO	2017-01-15 12:21:51 +01:00
Raphael Coeffic	c74e4f9a5c	fixed missing include	2017-01-15 12:20:39 +01:00
Raphael Coeffic	dddd09ae87	tramp: moved common definitions to vtx_common	2017-01-15 11:59:44 +01:00
Raphael Coeffic	58a778c797	tramp: removed temperature support until scale is defined	2017-01-15 00:08:39 +01:00
Raphael Coeffic	0fe30c06e2	some cleanup	2017-01-15 00:07:47 +01:00
Raphael Coeffic	632ab29e48	tramp: fixed initial cms menu settings	2017-01-13 18:21:28 +01:00
Raphael Coeffic	868256617d	fixed pit-mode ... Beware that the so called pit-mode is more some kind of a power switch. You might need to stick the receiver antenna against the transmitter to receive the very weak signal.	2017-01-13 15:59:49 +01:00
Raphael Coeffic	0818999530	tramp: use async changes + small fixes	2017-01-13 15:59:49 +01:00
jflyper	4696c4ad45	Debugging trampReceive: array boundary checking ... Removed frame timeout also.	2017-01-13 15:59:49 +01:00
jflyper	465870cb0c	Delay 1sec between freq and power	2017-01-13 15:59:49 +01:00
jflyper	3d9a82e4ae	Disable trampHandleResponse() instead of trampReceive()	2017-01-13 15:59:49 +01:00
jflyper	5bbf4e13c1	Fixed I (PIT) command parameter	2017-01-13 15:59:49 +01:00
jflyper	9bca2b88d0	Fixes and extensions	2017-01-13 15:59:36 +01:00
jflyper	195d3a3cf3	Serial option to production	2017-01-13 15:59:36 +01:00
jflyper	6550d738db	Some enhancements	2017-01-13 15:59:36 +01:00
jflyper	0c026a237a	Checksum range changed from 1	2017-01-13 15:59:36 +01:00
jflyper	74d175edfb	Changes per @ledvinap's commend + some debugging	2017-01-13 15:59:36 +01:00
jflyper	eec475078c	Removed debug	2017-01-13 15:59:36 +01:00
jflyper	6515ae3490	Added power and pit mode	2017-01-13 15:59:36 +01:00
jflyper	58ed2ed590	Tramp prototype driver	2017-01-13 15:59:36 +01:00
Michael Keller	033e41500c	Merge pull request #2097 from mikeller/add_brushed_autodetect_to_tinybeef3 ... Added brushed motor auto detect to TINYBEEF3.	2017-01-14 00:20:09 +13:00
Martin Budden	71d3963fdb	Merge pull request #2099 from martinbudden/bf_cc3d_opbl_rom_reduction ... Remove some serial RX protocols to reduce CC3D_OPBL ROM usage	2017-01-12 22:19:57 +00:00
Martin Budden	996bf5126a	Remove some serial RX protocols to reduce CC3D_OPBL ROM usage	2017-01-12 21:51:18 +00:00
mikeller	08ac5a3298	Added brushed motor auto detect to TINYBEEF3.	2017-01-13 00:17:03 +13:00
borisbstyle	7a9b30cc7b	Merge pull request #2096 from mikeller/add_gyro_calibration_debug ... Added debug output for gyro calibraton noise, increased 'moron_threshold' to 48.	2017-01-12 11:39:26 +01:00
mikeller	a91ff6838f	Added debug output for gyro calibraton noise, increased 'moron_threshold' to 48.	2017-01-12 21:54:05 +13:00
borisbstyle	9b2d34b818	Merge pull request #2089 from mikeller/disable_32khz_gyro_if_gyro_lpf_used ... Changed checks to disable 32kHz gyro updates if 'gyro_lpf' is used.	2017-01-11 15:50:22 +01:00
mikeller	5e45ec3293	Renamed 'serial_cli' and 'fc_main'.	2017-01-11 23:22:03 +13:00
mikeller	7243e819fc	Changed checks to disable 32kHz gyro updates if 'gyro_lpf' is used.	2017-01-11 22:11:51 +13:00
Martin Budden	322ae59051	Merge pull request #2086 from martinbudden/bf_gyro_sync_fix ... Fixed handling of 32kHz gyro in gyroSetSampleRate	2017-01-11 01:26:24 +00:00
blckmn	ccc7292b6c	Removed VCP default to using second serial (UART1 in most cases) to MSP	2017-01-11 12:24:34 +11:00
blckmn	1c4e5aceda	Update to ensure serial_cli list matches enum for PWM protocols	2017-01-11 12:13:07 +11:00
borisbstyle	af9a7f8eae	Correct handling for slower boards	2017-01-11 02:05:51 +01:00
Martin Budden	c4fe48c248	Fixed handling of 32kHz gyro in gyroSetSampleRate	2017-01-11 01:03:28 +00:00
borisbstyle	7c78c3090e	Merge pull request #2085 from martinbudden/bf_gyro_use32k_fix ... Do runtime check to see if gyro supports 32kHz	2017-01-11 01:58:43 +01:00
Martin Budden	7b90a76098	Do runtime check to see if gyro supports 32kHz	2017-01-11 00:53:15 +00:00
borisbstyle	b294ada0f1	Allow 32k for dshot600	2017-01-11 01:33:14 +01:00
blckmn	6606c0d39f	Renamed some items based on feedback from @martinbudden	2017-01-11 09:23:52 +11:00
blckmn	a88d2db0d5	Added dispatcher start only if needed.	2017-01-11 08:57:26 +11:00
Martin Budden	c4885d8018	Merge pull request #2012 from blckmn/task_dispatch ... Task dispatch - fix for SRXL delay required	2017-01-10 19:42:58 +00:00
Michael Keller	f7c4f3eff1	Increased MSP api version number in preparation for next release.	2017-01-10 18:38:14 +13:00
blckmn	f292dffac0	Putting GPS back in - but disabling MAG on NAZE.	2017-01-10 14:50:47 +11:00
blckmn	d4f7e6b9fd	Moved GPS for the moment	2017-01-10 14:15:28 +11:00
blckmn	820e36f227	Added define for turning on and off resource management and sensors	2017-01-10 11:38:16 +11:00