Beaky2000
6ce8fe3c0f
Fixed a bug which caused printing of floats larger than 100 in the CLI to crash
2016-04-17 22:09:49 +02:00
borisbstyle
244c091844
Remove Horizon Sensitivity
2016-04-08 22:34:03 +02:00
rigoneri
d6550827d0
Fixed issue that was causing the SPRacingF3Mini target not to build when transponder code was uncommented out. Fixes #179
2016-04-06 22:10:58 -05:00
borisbstyle
26af730510
Revert "- MultiFlasher support for SimonK escs"
...
This reverts commit 0cae020f76
2016-04-04 01:42:13 +02:00
borisbstyle
272932a93f
Revert "Add escpassthrough to all targets"
...
This reverts commit 95a464b1ad
2016-04-04 01:37:20 +02:00
KiteAnton
3a19b9dc8e
Output valid range/values for paramter
2016-04-03 08:46:39 +02:00
Brian Balogh
68587452ca
Point yaw_lowpass_hz CLI var at yaw_lpf_hz
2016-04-01 02:44:48 -04:00
borisbstyle
7c83d23ddf
Activate Iterm reset in normal mode too
2016-03-31 22:58:22 +02:00
borisbstyle
4c1b4a63be
Add new line
2016-03-31 00:49:42 +02:00
borisbstyle
ad0acf3f5f
Change cli naming conventions
2016-03-30 21:43:41 +02:00
borisbstyle
3e5e30c42c
Fix Iterm reset in super expo mode // new defaults
2016-03-30 21:23:14 +02:00
borisbstyle
95a464b1ad
Add escpassthrough to all targets
2016-03-30 17:13:59 +02:00
borisbstyle
bdca96842a
Add dump all cli command and restore old dump
2016-03-30 16:40:55 +02:00
borisbstyle
595d5d0867
Acro Plus replaced by Super Expo feature
2016-03-30 12:38:29 +02:00
borisbstyle
7b468c09f0
Luxfloat rework to int pids // Many pid cleanups // filter rework
...
Eeprom version // Dterm improvement
Further PID Improvements
Version Change
Coupling configured // reworked filtering // more test features
remove iterm scaler luxfloat
Further rework filters etc
Restore original luxfloat but scaled
Restore original luxfloat but scaled
2016-03-30 10:16:20 +02:00
borisbstyle
d95220327b
Merge pull request #310 from mikeller/add_restore_profile_switch_buffer
...
Enable CLI dump / restore of multiple profiles without buffer overrun
2016-03-29 15:08:27 +02:00
mikeller
4cc2718d59
Added printing of line of '#' after profile switch during dump to prevent buffer overrun on restore.
2016-03-30 01:47:22 +13:00
borisbstyle
6263f713bd
Merge pull request #302 from ethomas999/addVbatHysteresisCmd
...
Add 'vbat_hysteresis' parameter
2016-03-29 11:37:32 +02:00
Larry (TBS)
0cae020f76
- MultiFlasher support for SimonK escs
2016-03-29 15:39:19 +08:00
E Thomas
6eb9922c1c
Added 'vbat_hysteresis' parameter
2016-03-27 02:18:12 -04:00
borisbstyle
4ec5166c0f
Add option for gyro calibration on first arm // Remove Retarded Arm
2016-03-21 01:22:40 +01:00
KiteAnton
ee57ba387a
Fix beeper dump output bug
2016-03-12 10:30:26 +01:00
KiteAnton
3df01ac21d
Output all profiles and rateprofiles in cli dump
2016-03-12 09:01:26 +01:00
borisbstyle
3d345c4299
Cleanup old beeper command
2016-03-03 17:18:49 +01:00
Pierre-A
3af6ff7e9b
beeperCount in beeperOffSetAll for config_unittest
2016-03-03 16:58:50 +01:00
Pierre-A
b4fb558dd4
new "beeper" CLI command
2016-03-03 16:58:01 +01:00
borisbstyle
c2338ef0ed
Bump EEPROM
2016-03-02 14:20:33 +01:00
Dmitry Rechkin
2546eb15e7
At some point code has been changed to automatically reset
...
spektrum_sat_bind setting to 0 on hard reboot, which made obsolete 0 option
and essentially removed a feature which allowed to request binding on every
boot, which, for example, is how toy quadcopters behave.
I've added new setting:
"spektrum_sat_bind_autoreset" which can accept values:
0 - disabled
1 - enabled (by default, to preserve current behavior)
It is convenient, if you send BNF quadcopter to somebody, so they can
start flying it without the need to figuring out how cleanflight works, if
they are not familiar with it.
2016-03-01 13:42:30 -08:00
borisbstyle
98a1de2b70
Fix min check // Restore brushed motor support
2016-03-01 21:33:59 +01:00
borisbstyle
a2a58d8ccb
Add Experimental LPF parameter
2016-03-01 00:28:59 +01:00
borisbstyle
856ceee528
Fix BB / Acc reading / Optimize scheduler
2016-03-01 00:17:20 +01:00
borisbstyle
0de34f14fe
Overclock F1 targets by default (CC3D excluded) // Fix timer scaling for oneshot125 / oneshot42
2016-02-28 23:23:01 +01:00
borisbstyle
6e96adff0d
Scheduled motor refresh rate
2016-02-28 20:23:30 +01:00
borisbstyle
977fec408a
Change use_fast_pwm to forced_motor_pwm // New default fixed PWM rates
2016-02-28 01:16:59 +01:00
borisbstyle
f30a188937
Add selectable debug options
2016-02-26 00:22:08 +01:00
borisbstyle
2e8fa5eab1
Taskmain rework part II
...
INT wait
Fix auto settings F3
2016-02-26 00:22:05 +01:00
borisbstyle
f7091f48d0
Rework scheduler interaction with realtime process // Detailled task manager // Fix gyro sync (was broken)
...
Fix cycletime calculations
2016-02-25 20:09:07 +01:00
borisbstyle
9e1f78075d
Merge pull request #197 from chocol4te/betaflight
...
Ben Timby's Serial Passthough feature
2016-02-25 11:42:41 +01:00
borisbstyle
e4302b30fd
Merge pull request #215 from nathantsoi/sbus-inversion-2.4.1
...
Sbus inversion option tested against 2.4.1
2016-02-25 10:34:47 +01:00
nathan
35cfa5a3f1
sbus inversion option
2016-02-24 21:10:23 -08:00
borisbstyle
127251cc99
Some cleanups
...
Fix missing bracket
2016-02-24 23:51:50 +01:00
borisbstyle
f5de06c59e
Enable Faster cycletimes (Sample Rates) on all targets // More automatic looptime calculations
...
cleanup
2016-02-24 23:17:21 +01:00
KiteAnton
c8d219d325
Bug fix for profile dump hickup
2016-02-23 22:50:21 +01:00
borisbstyle
ee76376005
Multishot Implementation
2016-02-23 11:07:33 +01:00
borisbstyle
6b8f4f1111
Oneshot42 Implementation
2016-02-23 00:22:37 +01:00
borisbstyle
36a77c39d4
Merge branch 'beta_backup' into betaflight
2016-02-22 13:10:39 +01:00
borisbstyle
e3dce9f705
Configurable VFAS cell/full voltage
2016-02-22 11:55:33 +01:00
borisbstyle
4eb6456ea1
Revert "Remove GTUNE"
...
This reverts commit a16ac7fbe7
2016-02-21 14:06:10 +01:00
borisbstyle
97504c0ffe
Configurable PID jitter buffer
2016-02-21 13:18:06 +01:00
mikeller
ae08ce8dcd
Added 'rateprofile X' header to rateprofile dump in 'dump profile'.
2016-02-21 18:56:28 +13:00
