Hans Christian Olaussen
0b9105294b
Skip telemetry requests after write to eeprom
2018-12-05 21:56:31 +01:00
Cheng Lin
4b0ecb4c63
Edit .md file to match hardware
2018-12-05 10:32:03 -05:00
mikeller
3a7b11bbc1
Fix non-chronological element ordering.
2018-12-06 01:00:38 +13:00
Michael Keller
3100264e86
Merge pull request #7157 from ethomas997/vtxSetGetFreqFix
...
Fix SmartAudio 'looping' after vtx_freq in MHz set
2018-12-06 00:08:00 +13:00
Michael Keller
c6faec2a00
Merge pull request #7163 from TonyBlit/gps_vario_2
...
Numeric Vario calculated with GPS altitude
2018-12-06 00:07:05 +13:00
Michael Keller
a7d2852700
Merge pull request #7170 from wind0r/fix_bst_writeGpsPositionPrameToBST
...
fix writeGpsPositionPrameToBST
2018-12-06 00:05:18 +13:00
Michael Keller
40164e7351
Merge pull request #7172 from TonyBlit/osd_gps_blink_2
...
OSD GPS indicator blinks when numSats is below 5
2018-12-06 00:04:35 +13:00
Tony Cabello
6a6193551c
Numeric Vario calculated with GPS altitude
2018-12-05 09:01:53 +01:00
Cheng Lin
40247b0a1b
add I2C support, and remove blackbox flash define
...
Signed-off-by: Cheng Lin <bnn1044@gmail.com>
remove blackbox support
2018-12-04 20:43:16 -05:00
Michael Keller
c400186e70
Merge pull request #7078 from kmitchel/cascaded_dynamic_notch
...
Cascaded dynamic notches.
2018-12-05 12:49:11 +13:00
jflyper
e8c194e509
Use zero instead of 0xCAFEFEED to indicate absence of boot loader request
2018-12-05 03:16:42 +09:00
jflyper
14bbc3ac07
Code cleanup, remove old code and debug artifacts
2018-12-04 23:03:44 +09:00
jflyper
06882b6a2c
Turn on RTC bus clock for applicable MCUs, drop time clock init
2018-12-04 23:02:42 +09:00
Tony Cabello
93bf8b2186
OSD GPS indicator blinks when numSats is below 5
2018-12-04 09:19:45 +01:00
jflyper
2446dafffd
Kludge to do additional reset for F722 if RTC is invisible
2018-12-04 12:25:02 +09:00
jflyper
a539997ffb
Change position of checkForBootloaderRequest (F745 working)
2018-12-04 10:09:11 +09:00
jflyper
6bacdc71ff
Don't use variable initialization; it is referenced before it is initialized
2018-12-04 03:12:36 +09:00
Steffen Windoffer
1588a6a23d
fix writeGpsPositionPrameToBST
2018-12-03 16:35:50 +01:00
jflyper
c0d51a5f55
Convert F7s to use RTC backup register based persistent memory
2018-12-03 23:56:41 +09:00
jflyper
ac02ee4cf2
Delete bogus clock pll entry
2018-12-03 22:52:23 +09:00
Michael Keller
b6408b3a32
Merge pull request #6714 from pkruger/4155-feature-for-osd-elements-on-a-switch
...
4155 feature for osd elements on a switch
2018-12-04 02:25:57 +13:00
mikeller
1784910aa8
Fixed arming prevention unittest.
2018-12-04 01:34:06 +13:00
Michael Keller
76e3722a17
Merge pull request #7159 from TonyBlit/gps_rescue_prevent_arm
...
GPS Rescue: check failsafe procedure when preventing arming
2018-12-03 23:33:04 +13:00
Michael Keller
8eff13e8ab
Merge pull request #7160 from TonyBlit/gps_total_distance_speed
...
Calculate distance flown with a speed threshold
2018-12-03 23:32:43 +13:00
Michael Keller
8e9462e251
Merge pull request #7158 from TonyBlit/gps_rescue_armed_check
...
Arm prevention if Rescue is activated
2018-12-03 21:52:42 +13:00
Michael Keller
6566ec8ed6
Merge pull request #7151 from jflyper/bfdev-configurable--sdcard-spi-sdio
...
[SDCARD,MSC] Switch USBD storage fops table according to sdcard config
2018-12-03 21:39:22 +13:00
Michael Keller
c119843785
Merge pull request #7162 from TonyBlit/gps_osd_blink
...
Blink GPS indicator on OSD when numsats is lower than minimum configu…
2018-12-03 21:37:31 +13:00
Michael Keller
55a56cd522
Merge pull request #7148 from TonyBlit/osd_warn_rcsmoothing
...
Added missing osd_warn_rc_smoothing in settings
2018-12-03 21:34:04 +13:00
Michael Keller
ec7204e4a5
Merge pull request #7154 from mikeller/fix_bmi160_gyro
...
Fixed build dependency on EXTI for BMI160 driver.
2018-12-03 21:32:56 +13:00
jflyper
99fde1a0ff
Use RTC backup register for persistent storage
2018-12-03 09:45:36 +09:00
E Thomas
1fbaca86b4
Fix 'looping' after vtx_freq in MHz set
...
Added 'saGetSettings()' to saDoDevSetFreq() fn
2018-12-02 14:06:00 -05:00
Tony Cabello
84d2bc2c83
Arm prevention if Rescue is activated
2018-12-02 19:17:52 +01:00
Kenneth Mitchell
233ac7fb3f
Allow width=0 to select single notch. Restore dyn lpf mins.
2018-12-02 10:01:51 -05:00
Kenneth Mitchell
011eae93c6
Cascaded notch filters.
2018-12-02 09:52:02 -05:00
jflyper
0cf8679b5c
Switch USBD storage fops table according to sdcard config
2018-12-02 21:51:40 +09:00
Tony Cabello
d87e40725e
Calculate distance flown with a speed threshold
2018-12-02 06:49:46 +01:00
Tony Cabello
bdd57a6ce4
GPS Rescue: check failsafe procedure when preventing arming
2018-12-02 04:47:47 +01:00
Tony Cabello
8a15b128dc
Added missing osd_warn_rc_smoothing in settings
2018-12-02 04:37:18 +01:00
mikeller
ca5da2fdbb
Fixed build dependency on EXTI for BMI160 driver.
2018-12-02 10:50:15 +13:00
Michael Keller
3736a2486d
Merge pull request #7116 from jflyper/bfdev-status-command-refactor
...
[CLI] Refactor status command to print things in more sensible order
2018-12-02 10:41:07 +13:00
jflyper
d4ac21cdc7
Refactor status command to print things in more sensible order
2018-12-01 22:21:58 +09:00
Pieter Kruger
8d981df1a9
Add OSD Profile feature - issue 4155
2018-12-01 17:51:38 +10:00
Tony Cabello
eadddf90af
Blink GPS indicator on OSD when numsats is lower than minimum configured for GPS Rescue
2018-11-30 05:54:34 +01:00
Michael Keller
8a4ea0785e
Merge pull request #7142 from mikeller/remove_use_multi_gyro
...
Removed USE_MULTI_GYRO from targets that have it defined by default.
2018-11-29 19:28:54 +13:00
Michael Keller
ed86cd27e5
Merge pull request #7143 from etracer65/rc_smoothing_retraining_samples
...
RC Smoothing: reduce retraining sample count
2018-11-29 19:28:41 +13:00
Michael Keller
d9da73a496
Merge pull request #7145 from etracer65/msc_osx
...
Fixes to allow the MSC command with on-board flash to work on MacOS.
2018-11-29 19:26:47 +13:00
Michael Keller
2fd4589106
Merge pull request #7127 from jflyper/bfdev-KROOZX-use-pinio-for-OSD-channel-switch
...
[KROOZX] Use pinio for OSD channel switch and move OSD_CH_SWITCH out of target.h
2018-11-28 23:52:35 +13:00
jflyper
0f7d1ead97
Move default pin defs out of driver file
2018-11-28 14:07:49 +09:00
Bruce Luckcuck
a1899d671b
Fixes to allow the MSC command with on-board flash to work on MacOS.
...
Fixed a bug in the STM libraries to set the write protected bin in the device config for the mass storage SCSI sense code 6 and 10. Previously the `isWriteProtected()` result was only being examined during write attempts and they correctly failed and returned a `NOT_READY` response (we don't support writes for SPIFLASH). Unfortunately since the device was not flagged as write protected on MacOS the operating system would try to write to the device and this would fail causing the operating system to think the device wasn't ready and refuse to mount it.
General fixes:
Ensured that the filesystem appears to be at least 256MB so that the volume will be treated as FAT32 instead of FAT16. A hidden "padding.txt" file is created to represent the extra space.
Fix the directory structure to only create the "btfl_all.bbl" file if there were any logs found. Previously it would always be created and this would lead to directory corruption.
Fix the size calculation for the "btfl_all.bbl" file. Previously it was being set to the total flash size rather than the used space.
2018-11-27 18:48:46 -05:00
Bruce Luckcuck
76e537cff7
RC Smoothing: reduce retraining sample count
...
Reduce the retraining sample count from 50 to 20. The initial training remains unchanged at 50 samples.
Speeds up the transition to a new detected frame rate and adjusts the filters to new optimal cutoffs quicker. As an example for CRSF: switching from 150hz to 50hz would take approximately 1 second (50 samples @ 20ms). After this change it will take approximately 0.4 seconds.
2018-11-27 10:48:53 -05:00
