mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-16 12:55:19 +03:00
127 lines
2.7 KiB
Markdown
127 lines
2.7 KiB
Markdown
## Serial port functions and scenarios
|
|
|
|
### Serial port scenarios
|
|
|
|
```
|
|
0 UNUSED
|
|
1 MSP, CLI, TELEMETRY, GPS-PASTHROUGH
|
|
2 GPS ONLY
|
|
3 RX SERIAL ONLY
|
|
4 TELEMETRY ONLY
|
|
5 MSP, CLI, GPS-PASTHROUGH
|
|
6 CLI ONLY
|
|
7 GPS-PASSTHROUGH ONLY
|
|
8 MSP ONLY
|
|
```
|
|
|
|
### Contraints
|
|
|
|
* There must always be a port available to use for MSP
|
|
* There must always be a port available to use for CLI
|
|
* To use a port for a function, the function's corresponding feature must be enabled first.
|
|
e.g. to use GPS enable the GPS feature.
|
|
* If the configuration is invalid the serial port configuration will reset to it's defaults and features may be disabled.
|
|
|
|
### Examples
|
|
|
|
All examples assume default configuration (via cli `defaults` command)
|
|
|
|
a) GPS and TELEMETRY (when armed)
|
|
|
|
- TELEMETRY,MSP,CLI,GPS PASSTHROUGH on UART1
|
|
- GPS on UART2
|
|
|
|
```
|
|
feature TELEMETRY
|
|
feature GPS
|
|
save
|
|
```
|
|
|
|
b) RX SERIAL and TELEMETRY (when armed)
|
|
|
|
- TELEMETRY,MSP,CLI,GPS PASSTHROUGH on UART1
|
|
- RX SERIAL on UART2
|
|
|
|
```
|
|
feature -RX_PARALLEL_PWM
|
|
feature RX_SERIAL
|
|
feature TELEMETRY
|
|
set serial_port_2_scenario = 3
|
|
save
|
|
```
|
|
|
|
b) RX SERIAL and TELEMETRY via softserial
|
|
|
|
- MSP,CLI,GPS PASSTHROUGH on UART1
|
|
- RX SERIAL on UART2
|
|
- TELEMETRY on SOFTSERIAL1
|
|
|
|
```
|
|
feature -RX_PARALLEL_PWM
|
|
feature RX_SERIAL
|
|
feature TELEMETRY
|
|
feature SOFTSERIAL
|
|
set serial_port_2_scenario = 3
|
|
set serial_port_3_scenario = 4
|
|
save
|
|
```
|
|
|
|
c) GPS and TELEMETRY via softserial
|
|
|
|
- MSP,CLI,GPS PASSTHROUGH on UART1
|
|
- GPS on UART2
|
|
- TELEMETRY on SOFTSERIAL1
|
|
|
|
```
|
|
feature -RX_PARALLEL_PWM
|
|
feature RX_PPM
|
|
feature TELEMETRY
|
|
feature GPS
|
|
feature SOFTSERIAL
|
|
set serial_port_3_scenario = 4
|
|
save
|
|
```
|
|
d) RX SERIAL, GPS and TELEMETRY (when armed) MSP/CLI via softserial
|
|
|
|
- GPS on UART1
|
|
- RX SERIAL on UART2
|
|
- TELEMETRY,MSP,CLI,GPS PASSTHROUGH on SOFTSERIAL1
|
|
|
|
```
|
|
feature -RX_PARALLEL_PWM
|
|
feature TELEMETRY
|
|
feature GPS
|
|
feature RX_SERIAL
|
|
feature SOFTSERIAL
|
|
set serial_port_1_scenario = 2
|
|
set serial_port_2_scenario = 3
|
|
set serial_port_3_scenario = 1
|
|
set msp_baudrate = 19200
|
|
set cli_baudrate = 19200
|
|
set gps_passthrough_baudrate = 19200
|
|
save
|
|
```
|
|
|
|
## FrSky telemetry
|
|
|
|
FrSky telemetry signals are inverted. To connect a cleanflight capable board to an FrSKy receiver you have some options.
|
|
|
|
1. A hardware inverter - Built in to some flight controllers.
|
|
2. Use software serial and enable frsky_inversion.
|
|
3. Use a flight controller that has software configurable hardware inversion (e.g. STM32F30x).
|
|
|
|
For 1, just connect your inverter to a usart or software serial port.
|
|
|
|
For 2 and 3 use the cli command as follows:
|
|
|
|
```
|
|
set frsky_inversion = 1
|
|
```
|
|
|
|
## CLI command differences from baseflight
|
|
|
|
```
|
|
gps_provider = gps_type
|
|
serialrx_provider = serialrx_type
|
|
```
|
|
|