| .. |
|
baseflight_startups
|
Initial support for FY90Q hardware
|
2012-04-08 14:46:50 +00:00 |
|
board.h
|
fixed Makefile to build w/new drivers (thanks Hydra)
|
2013-08-19 23:29:20 +00:00 |
|
buzzer.c
|
Applied patch from trunet for running at 64MHz off HSI for broken Chinese kcopter clones
|
2012-10-06 14:40:24 +00:00 |
|
cli.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
config.c
|
marking some more stuff const that shouldn't be changing. thx Hydra for the catch.
|
2013-08-24 10:20:55 +00:00 |
|
drv_adc.c
|
implemented using one of RC inputs as ADC channel for power meter.
|
2012-10-19 02:43:27 +00:00 |
|
drv_adc.h
|
implemented using one of RC inputs as ADC channel for power meter.
|
2012-10-19 02:43:27 +00:00 |
|
drv_adc_fy90q.c
|
begin initial merge of 2.2 features
|
2013-03-14 14:03:30 +00:00 |
|
drv_adxl345.c
|
a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
|
2013-07-02 00:58:50 +00:00 |
|
drv_adxl345.h
|
fixed acczero offsets to 0 on initial eeprom cleanup
|
2012-04-07 15:29:00 +00:00 |
|
drv_bmp085.c
|
a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
|
2013-07-02 00:58:50 +00:00 |
|
drv_bmp085.h
|
cleaned up bmp085 driver
|
2012-08-20 10:25:10 +00:00 |
|
drv_gpio.c
|
initial pass at gpio cleanup. removed almost all dependency on stdperiphlib (remaining exti).
|
2013-06-29 14:09:54 +00:00 |
|
drv_gpio.h
|
oops! had pin definition wrong for Pin_0 and Pin_1, was using drv_gpio in another project and noticed it wasn't working very well :)
|
2013-08-20 11:44:49 +00:00 |
|
drv_hcsr04.c
|
fixed Makefile to build w/new drivers (thanks Hydra)
|
2013-08-19 23:29:20 +00:00 |
|
drv_hcsr04.h
|
fixed Makefile to build w/new drivers (thanks Hydra)
|
2013-08-19 23:29:20 +00:00 |
|
drv_hmc5883l.c
|
new SPI2 driver w/testcase
|
2013-07-02 02:52:33 +00:00 |
|
drv_hmc5883l.h
|
corrected magnetometer alignment bug found by CrashPilot1000 - during mag calibration, axes must be swapped per sensor alignment, which didn't happen.
|
2013-06-12 02:45:56 +00:00 |
|
drv_i2c.c
|
a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
|
2013-07-02 00:58:50 +00:00 |
|
drv_i2c.h
|
added i2cWriteBuffer() for ledring stuff
|
2012-03-13 15:32:38 +00:00 |
|
drv_i2c_soft.c
|
initial pass at gpio cleanup. removed almost all dependency on stdperiphlib (remaining exti).
|
2013-06-29 14:09:54 +00:00 |
|
drv_l3g4200d.c
|
begin initial merge of 2.2 features
|
2013-03-14 14:03:30 +00:00 |
|
drv_l3g4200d.h
|
begin initial merge of 2.2 features
|
2013-03-14 14:03:30 +00:00 |
|
drv_ledring.c
|
synced serial protocol to multiwii-dev 20120622
|
2012-06-30 13:20:53 +00:00 |
|
drv_ledring.h
|
started adding ledring stuff (yawn). found out i2c was broken, stopped.
|
2012-03-13 10:49:23 +00:00 |
|
drv_mma845x.c
|
a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
|
2013-07-02 00:58:50 +00:00 |
|
drv_mma845x.h
|
oops, forgot to commit mma845x driver.
|
2012-05-19 03:07:00 +00:00 |
|
drv_mpu3050.c
|
begin initial merge of 2.2 features
|
2013-03-14 14:03:30 +00:00 |
|
drv_mpu3050.h
|
begin initial merge of 2.2 features
|
2013-03-14 14:03:30 +00:00 |
|
drv_mpu6050.c
|
new SPI2 driver w/testcase
|
2013-07-02 02:52:33 +00:00 |
|
drv_mpu6050.h
|
begin initial merge of 2.2 features
|
2013-03-14 14:03:30 +00:00 |
|
drv_ms5611.c
|
a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
|
2013-07-02 00:58:50 +00:00 |
|
drv_ms5611.h
|
cleaned up bmp085 driver
|
2012-08-20 10:25:10 +00:00 |
|
drv_pwm.c
|
marking some more stuff const that shouldn't be changing. thx Hydra for the catch.
|
2013-08-24 10:20:55 +00:00 |
|
drv_pwm.h
|
beginnings of cli editing support by cehteh; (still buggy)
|
2013-05-09 12:26:11 +00:00 |
|
drv_pwm_fy90q.c
|
beginnings of cli editing support by cehteh; (still buggy)
|
2013-05-09 12:26:11 +00:00 |
|
drv_spi.c
|
new SPI2 driver w/testcase
|
2013-07-02 02:52:33 +00:00 |
|
drv_spi.h
|
new SPI2 driver w/testcase
|
2013-07-02 02:52:33 +00:00 |
|
drv_system.c
|
fixed Makefile to build w/new drivers (thanks Hydra)
|
2013-08-19 23:29:20 +00:00 |
|
drv_system.h
|
a couple optimizations for dynamic HSE frequency - moved SetSysClock() to run after reset vector + bss init, and changed rcc which used hardcoded HSE_VALUE.
|
2013-07-02 00:58:50 +00:00 |
|
drv_uart.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
drv_uart.h
|
Fixed issue #15, new uart building under gcc toolchain, thanks!
|
2013-08-22 13:37:45 +00:00 |
|
gps.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
imu.c
|
fixed Makefile to build w/new drivers (thanks Hydra)
|
2013-08-19 23:29:20 +00:00 |
|
main.c
|
Fixed issue #15, new uart building under gcc toolchain, thanks!
|
2013-08-22 13:37:45 +00:00 |
|
mixer.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
mw.c
|
fixed Makefile to build w/new drivers (thanks Hydra)
|
2013-08-19 23:29:20 +00:00 |
|
mw.h
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
printf.c
|
Fixed issue #15, new uart building under gcc toolchain, thanks!
|
2013-08-22 13:37:45 +00:00 |
|
printf.h
|
added printf() support via SpareTimeLabs printf lib. this cleaned up some mess inside cli.c
|
2012-09-06 06:35:02 +00:00 |
|
sensors.c
|
corrected magnetometer alignment bug found by CrashPilot1000 - during mag calibration, axes must be swapped per sensor alignment, which didn't happen.
|
2013-06-12 02:45:56 +00:00 |
|
serial.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
spektrum.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
|
telemetry.c
|
rewritten drv_uart to suck slightly less
|
2013-08-22 07:48:07 +00:00 |
01376de3e5