mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-24 00:35:39 +03:00
b83b9040f9
Check if ADC current meter is enabled in sonarInit() and change sonar pins to pwm 5 and 6 if it is. Same as when RX_PARALLEL is enabled.
30 lines
1 KiB
Markdown
30 lines
1 KiB
Markdown
# Sonar
|
|
|
|
A sonar sensor can be used to measure altitude for use with BARO and SONAR altitude
|
|
hold modes.
|
|
|
|
The sonar sensor is used instead of the pressure sensor (barometer) at low altitudes.
|
|
The sonar sensor is only used when the aircraft inclination angle (attitude) is small.
|
|
|
|
## Hardware
|
|
|
|
Currently the only supported sensor is the HCSR04 sensor.
|
|
|
|
## Connections
|
|
|
|
### Naze/Flip32+
|
|
|
|
| Mode | Trigger | Echo | Inline 1k resistors |
|
|
| ------------------------------- | ------------- | ------------- | ------------------- |
|
|
| Parallel PWM/ADC current sensor | PB8 / Motor 5 | PB9 / Motor 6 | NO (5v tolerant) |
|
|
| PPM/Serial RX | PB0 / RC7 | PB1 / RC8 | YES (3.3v input) |
|
|
|
|
Current meter cannot be used in conjunction with Parallel PWM and Sonar.
|
|
|
|
### Olimexino
|
|
|
|
| Trigger | Echo | Inline 1k resistors |
|
|
| ------------- | ------------- | ------------------- |
|
|
| PB0 / RC7 | PB1 / RC8 | YES (3.3v input) |
|
|
|
|
Current meter cannot be used in conjunction with sonar.
|