mirror of
https://github.com/betaflight/betaflight.git
synced 2025-07-15 20:35:33 +03:00
417 lines
16 KiB
C
417 lines
16 KiB
C
/*
|
|
* This file is part of Cleanflight.
|
|
*
|
|
* Cleanflight is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Cleanflight is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with Cleanflight. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include <math.h>
|
|
|
|
#include <platform.h>
|
|
|
|
#include "build_config.h"
|
|
#include "debug.h"
|
|
|
|
#include "common/axis.h"
|
|
#include "common/maths.h"
|
|
#include "common/filter.h"
|
|
|
|
#include "drivers/sensor.h"
|
|
#include "drivers/gyro_sync.h"
|
|
|
|
#include "drivers/accgyro.h"
|
|
#include "sensors/sensors.h"
|
|
#include "sensors/gyro.h"
|
|
#include "sensors/acceleration.h"
|
|
|
|
#include "rx/rx.h"
|
|
|
|
#include "io/rc_controls.h"
|
|
#include "io/gps.h"
|
|
|
|
#include "flight/pid.h"
|
|
#include "flight/imu.h"
|
|
#include "flight/navigation.h"
|
|
#include "flight/gtune.h"
|
|
|
|
#include "config/runtime_config.h"
|
|
|
|
extern uint8_t motorCount;
|
|
extern bool motorLimitReached;
|
|
uint32_t targetPidLooptime;
|
|
|
|
int16_t axisPID[3];
|
|
|
|
#ifdef BLACKBOX
|
|
int32_t axisPID_P[3], axisPID_I[3], axisPID_D[3];
|
|
#endif
|
|
|
|
// PIDweight is a scale factor for PIDs which is derived from the throttle and TPA setting, and 100 = 100% scale means no PID reduction
|
|
uint8_t PIDweight[3];
|
|
|
|
static int32_t errorGyroI[3], errorGyroILimit[3];
|
|
#ifndef SKIP_PID_LUXFLOAT
|
|
static float errorGyroIf[3], errorGyroIfLimit[3];
|
|
#endif
|
|
|
|
static void pidMultiWiiRewrite(const pidProfile_t *pidProfile, const controlRateConfig_t *controlRateConfig,
|
|
uint16_t max_angle_inclination, const rollAndPitchTrims_t *angleTrim, const rxConfig_t *rxConfig);
|
|
|
|
pidControllerFuncPtr pid_controller = pidMultiWiiRewrite; // which pid controller are we using, defaultMultiWii
|
|
|
|
void setTargetPidLooptime(uint8_t pidProcessDenom) {
|
|
targetPidLooptime = targetLooptime * pidProcessDenom;
|
|
}
|
|
|
|
float calculateRate(int axis, const controlRateConfig_t *controlRateConfig) {
|
|
float angleRate;
|
|
|
|
if (isSuperExpoActive()) {
|
|
float rcFactor = (axis == YAW) ? (ABS(rcCommand[axis]) / 500.0f) : (ABS(rcCommand[axis]) / (500.0f * (controlRateConfig->rcRate8 / 100.0f)));
|
|
rcFactor = 1.0f / (1.0f - (rcFactor * (controlRateConfig->rates[axis] / 100.0f)));
|
|
|
|
angleRate = rcFactor * ((27 * rcCommand[axis]) / 16.0f);
|
|
} else {
|
|
angleRate = (float)((controlRateConfig->rates[axis] + 27) * rcCommand[axis]) / 16.0f;
|
|
}
|
|
|
|
return angleRate;
|
|
}
|
|
|
|
uint16_t getDynamicKp(int axis, const pidProfile_t *pidProfile) {
|
|
uint16_t dynamicKp;
|
|
|
|
uint32_t dynamicFactor = constrain(ABS(rcCommand[axis] << 8) / DYNAMIC_PTERM_STICK_THRESHOLD, 0, 1 << 7);
|
|
|
|
dynamicKp = ((pidProfile->P8[axis] << 8) + (pidProfile->P8[axis] * dynamicFactor)) >> 8;
|
|
|
|
return dynamicKp;
|
|
}
|
|
|
|
uint16_t getDynamicKi(int axis, const pidProfile_t *pidProfile) {
|
|
uint16_t dynamicKi;
|
|
uint16_t resetRate;
|
|
|
|
resetRate = (axis == YAW) ? pidProfile->yawItermIgnoreRate : pidProfile->rollPitchItermIgnoreRate;
|
|
|
|
uint32_t dynamicFactor = ((resetRate << 16) / (resetRate + ABS(gyroADC[axis]))) >> 8;
|
|
dynamicKi = (pidProfile->I8[axis] * dynamicFactor) >> 8;
|
|
|
|
return dynamicKi;
|
|
}
|
|
|
|
void pidResetErrorGyroState(void)
|
|
{
|
|
int axis;
|
|
|
|
for (axis = 0; axis < 3; axis++) {
|
|
errorGyroI[axis] = 0;
|
|
#ifndef SKIP_PID_LUXFLOAT
|
|
errorGyroIf[axis] = 0.0f;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
float getdT (void) {
|
|
static float dT;
|
|
if (!dT) dT = (float)targetPidLooptime * 0.000001f;
|
|
|
|
return dT;
|
|
}
|
|
|
|
const angle_index_t rcAliasToAngleIndexMap[] = { AI_ROLL, AI_PITCH };
|
|
|
|
static filterStatePt1_t deltaFilterState[3];
|
|
static filterStatePt1_t yawFilterState;
|
|
|
|
#ifndef SKIP_PID_LUXFLOAT
|
|
static void pidLuxFloat(const pidProfile_t *pidProfile, const controlRateConfig_t *controlRateConfig,
|
|
uint16_t max_angle_inclination, const rollAndPitchTrims_t *angleTrim, const rxConfig_t *rxConfig)
|
|
{
|
|
float RateError, AngleRate, gyroRate;
|
|
float ITerm,PTerm,DTerm;
|
|
static float lastRate[3];
|
|
float delta;
|
|
int axis;
|
|
float horizonLevelStrength = 1;
|
|
|
|
float tpaFactor = PIDweight[0] / 100.0f; // tpa is now float
|
|
|
|
// Scaling factors for Pids to match rewrite and use same defaults
|
|
static const float luxPTermScale = 1.0f / 128;
|
|
static const float luxITermScale = 1000000.0f / 0x1000000;
|
|
static const float luxDTermScale = (0.000001f * (float)0xFFFF) / 508;
|
|
|
|
if (FLIGHT_MODE(HORIZON_MODE)) {
|
|
// Figure out the raw stick positions
|
|
const int32_t stickPosAil = ABS(getRcStickDeflection(FD_ROLL, rxConfig->midrc));
|
|
const int32_t stickPosEle = ABS(getRcStickDeflection(FD_PITCH, rxConfig->midrc));
|
|
const int32_t mostDeflectedPos = MAX(stickPosAil, stickPosEle);
|
|
// Progressively turn off the horizon self level strength as the stick is banged over
|
|
horizonLevelStrength = (float)(500 - mostDeflectedPos) / 500; // 1 at centre stick, 0 = max stick deflection
|
|
if(pidProfile->D8[PIDLEVEL] == 0){
|
|
horizonLevelStrength = 0;
|
|
} else {
|
|
horizonLevelStrength = constrainf(((horizonLevelStrength - 1) * (100 / pidProfile->D8[PIDLEVEL])) + 1, 0, 1);
|
|
}
|
|
}
|
|
|
|
// ----------PID controller----------
|
|
for (axis = 0; axis < 3; axis++) {
|
|
|
|
// ACRO mode, control is GYRO based, direct sticks control is applied to rate PID
|
|
AngleRate = calculateRate(axis, controlRateConfig);
|
|
|
|
if ((FLIGHT_MODE(ANGLE_MODE) || FLIGHT_MODE(HORIZON_MODE)) && axis != YAW) {
|
|
// calculate error angle and limit the angle to the max inclination
|
|
#ifdef GPS
|
|
const float errorAngle = (constrain(2 * rcCommand[axis] + GPS_angle[axis], -((int) max_angle_inclination),
|
|
+max_angle_inclination) - attitude.raw[axis] + angleTrim->raw[axis]); // 16 bits is ok here
|
|
#else
|
|
const float errorAngle = (constrain(2 * rcCommand[axis], -((int) max_angle_inclination),
|
|
+max_angle_inclination) - attitude.raw[axis] + angleTrim->raw[axis]); // 16 bits is ok here
|
|
#endif
|
|
if (FLIGHT_MODE(ANGLE_MODE)) {
|
|
// ANGLE mode - control is angle based, so control loop is needed
|
|
AngleRate = errorAngle * pidProfile->P8[PIDLEVEL] / 16.0f;
|
|
} else {
|
|
// HORIZON mode - direct sticks control is applied to rate PID
|
|
// mix up angle error to desired AngleRate to add a little auto-level feel
|
|
AngleRate += errorAngle * pidProfile->I8[PIDLEVEL] * horizonLevelStrength / 16.0f;
|
|
}
|
|
}
|
|
|
|
gyroRate = gyroADCf[axis] / 4.0f; // gyro output scaled to rewrite scale
|
|
|
|
// --------low-level gyro-based PID. ----------
|
|
// Used in stand-alone mode for ACRO, controlled by higher level regulators in other modes
|
|
// -----calculate scaled error.AngleRates
|
|
// multiplication of rcCommand corresponds to changing the sticks scaling here
|
|
RateError = AngleRate - gyroRate;
|
|
|
|
uint16_t kP = (pidProfile->dynamic_pid) ? getDynamicKp(axis, pidProfile) : pidProfile->P8[axis];
|
|
|
|
// -----calculate P component
|
|
PTerm = luxPTermScale * RateError * kP * tpaFactor;
|
|
|
|
// Constrain YAW by yaw_p_limit value if not servo driven in that case servolimits apply
|
|
if((motorCount >= 4 && pidProfile->yaw_p_limit) && axis == YAW) {
|
|
PTerm = constrainf(PTerm, -pidProfile->yaw_p_limit, pidProfile->yaw_p_limit);
|
|
}
|
|
|
|
// -----calculate I component.
|
|
uint16_t kI = (pidProfile->dynamic_pid) ? getDynamicKi(axis, pidProfile) : pidProfile->I8[axis];
|
|
|
|
errorGyroIf[axis] = constrainf(errorGyroIf[axis] + luxITermScale * RateError * getdT() * kI, -250.0f, 250.0f);
|
|
|
|
if (motorLimitReached) {
|
|
errorGyroIf[axis] = constrainf(errorGyroIf[axis], -errorGyroIfLimit[axis], errorGyroIfLimit[axis]);
|
|
} else {
|
|
errorGyroIfLimit[axis] = ABS(errorGyroIf[axis]);
|
|
}
|
|
|
|
// limit maximum integrator value to prevent WindUp - accumulating extreme values when system is saturated.
|
|
// I coefficient (I8) moved before integration to make limiting independent from PID settings
|
|
ITerm = errorGyroIf[axis];
|
|
|
|
//-----calculate D-term
|
|
if (axis == YAW) {
|
|
if (pidProfile->yaw_lpf_hz) PTerm = filterApplyPt1(PTerm, &yawFilterState, pidProfile->yaw_lpf_hz, getdT());
|
|
|
|
axisPID[axis] = lrintf(PTerm + ITerm);
|
|
|
|
if (motorCount >= 4) {
|
|
int16_t yaw_jump_prevention_limit = constrain(YAW_JUMP_PREVENTION_LIMIT_HIGH - (pidProfile->D8[axis] << 3), YAW_JUMP_PREVENTION_LIMIT_LOW, YAW_JUMP_PREVENTION_LIMIT_HIGH);
|
|
|
|
// prevent "yaw jump" during yaw correction
|
|
axisPID[YAW] = constrain(axisPID[YAW], -yaw_jump_prevention_limit - ABS(rcCommand[YAW]), yaw_jump_prevention_limit + ABS(rcCommand[YAW]));
|
|
}
|
|
|
|
DTerm = 0.0f; // needed for blackbox
|
|
} else {
|
|
delta = -(gyroRate - lastRate[axis]);
|
|
lastRate[axis] = gyroRate;
|
|
|
|
// Divide delta by targetLooptime to get differential (ie dr/dt)
|
|
delta *= (1.0f / getdT());
|
|
|
|
// Filter delta
|
|
if (pidProfile->dterm_lpf_hz) delta = filterApplyPt1(delta, &deltaFilterState[axis], pidProfile->dterm_lpf_hz, getdT());
|
|
|
|
DTerm = constrainf(luxDTermScale * delta * (float)pidProfile->D8[axis] * tpaFactor, -300.0f, 300.0f);
|
|
|
|
// -----calculate total PID output
|
|
axisPID[axis] = constrain(lrintf(PTerm + ITerm + DTerm), -1000, 1000);
|
|
}
|
|
|
|
#ifdef GTUNE
|
|
if (FLIGHT_MODE(GTUNE_MODE) && ARMING_FLAG(ARMED)) {
|
|
calculate_Gtune(axis);
|
|
}
|
|
#endif
|
|
|
|
#ifdef BLACKBOX
|
|
axisPID_P[axis] = PTerm;
|
|
axisPID_I[axis] = ITerm;
|
|
axisPID_D[axis] = DTerm;
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void pidMultiWiiRewrite(const pidProfile_t *pidProfile, const controlRateConfig_t *controlRateConfig, uint16_t max_angle_inclination,
|
|
const rollAndPitchTrims_t *angleTrim, const rxConfig_t *rxConfig)
|
|
{
|
|
int axis;
|
|
int32_t PTerm, ITerm, DTerm, delta;
|
|
static int32_t lastRate[3];
|
|
int32_t AngleRateTmp, RateError, gyroRate;
|
|
|
|
int8_t horizonLevelStrength = 100;
|
|
|
|
if (FLIGHT_MODE(HORIZON_MODE)) {
|
|
// Figure out the raw stick positions
|
|
const int32_t stickPosAil = ABS(getRcStickDeflection(FD_ROLL, rxConfig->midrc));
|
|
const int32_t stickPosEle = ABS(getRcStickDeflection(FD_PITCH, rxConfig->midrc));
|
|
const int32_t mostDeflectedPos = MAX(stickPosAil, stickPosEle);
|
|
// Progressively turn off the horizon self level strength as the stick is banged over
|
|
horizonLevelStrength = (500 - mostDeflectedPos) / 5; // 100 at centre stick, 0 = max stick deflection
|
|
// Using Level D as a Sensitivity for Horizon. 0 more level to 255 more rate. Default value of 100 seems to work fine.
|
|
// For more rate mode increase D and slower flips and rolls will be possible
|
|
horizonLevelStrength = constrain((10 * (horizonLevelStrength - 100) * (10 * pidProfile->D8[PIDLEVEL] / 80) / 100) + 100, 0, 100);
|
|
}
|
|
|
|
// ----------PID controller----------
|
|
for (axis = 0; axis < 3; axis++) {
|
|
|
|
// -----Get the desired angle rate depending on flight mode
|
|
AngleRateTmp = (int32_t)calculateRate(axis, controlRateConfig);
|
|
|
|
if ((FLIGHT_MODE(ANGLE_MODE) || FLIGHT_MODE(HORIZON_MODE)) && axis != YAW) {
|
|
// calculate error angle and limit the angle to max configured inclination
|
|
#ifdef GPS
|
|
const int32_t errorAngle = constrain(2 * rcCommand[axis] + GPS_angle[axis], -((int) max_angle_inclination),
|
|
+max_angle_inclination) - attitude.raw[axis] + angleTrim->raw[axis];
|
|
#else
|
|
const int32_t errorAngle = constrain(2 * rcCommand[axis], -((int) max_angle_inclination),
|
|
+max_angle_inclination) - attitude.raw[axis] + angleTrim->raw[axis];
|
|
#endif
|
|
if (FLIGHT_MODE(ANGLE_MODE)) {
|
|
// ANGLE mode - control is angle based, so control loop is needed
|
|
AngleRateTmp = (errorAngle * pidProfile->P8[PIDLEVEL]) >> 4;
|
|
} else {
|
|
// HORIZON mode - mix up angle error to desired AngleRateTmp to add a little auto-level feel,
|
|
// horizonLevelStrength is scaled to the stick input
|
|
AngleRateTmp += (errorAngle * pidProfile->I8[PIDLEVEL] * horizonLevelStrength / 100) >> 4;
|
|
}
|
|
}
|
|
|
|
// --------low-level gyro-based PID. ----------
|
|
// Used in stand-alone mode for ACRO, controlled by higher level regulators in other modes
|
|
// -----calculate scaled error.AngleRates
|
|
// multiplication of rcCommand corresponds to changing the sticks scaling here
|
|
gyroRate = gyroADC[axis] / 4;
|
|
RateError = AngleRateTmp - gyroRate;
|
|
|
|
uint16_t kP = (pidProfile->dynamic_pid) ? getDynamicKp(axis, pidProfile) : pidProfile->P8[axis];
|
|
|
|
// -----calculate P component
|
|
PTerm = (RateError * kP * PIDweight[axis] / 100) >> 7;
|
|
|
|
// Constrain YAW by yaw_p_limit value if not servo driven in that case servolimits apply
|
|
if((motorCount >= 4 && pidProfile->yaw_p_limit) && axis == YAW) {
|
|
PTerm = constrain(PTerm, -pidProfile->yaw_p_limit, pidProfile->yaw_p_limit);
|
|
}
|
|
|
|
// -----calculate I component
|
|
// there should be no division before accumulating the error to integrator, because the precision would be reduced.
|
|
// Precision is critical, as I prevents from long-time drift. Thus, 32 bits integrator is used.
|
|
// Time correction (to avoid different I scaling for different builds based on average cycle time)
|
|
// is normalized to cycle time = 2048.
|
|
uint16_t kI = (pidProfile->dynamic_pid) ? getDynamicKi(axis, pidProfile) : pidProfile->I8[axis];
|
|
|
|
errorGyroI[axis] = errorGyroI[axis] + ((RateError * (uint16_t)targetPidLooptime) >> 11) * kI;
|
|
|
|
// limit maximum integrator value to prevent WindUp - accumulating extreme values when system is saturated.
|
|
// I coefficient (I8) moved before integration to make limiting independent from PID settings
|
|
errorGyroI[axis] = constrain(errorGyroI[axis], (int32_t) - GYRO_I_MAX << 13, (int32_t) + GYRO_I_MAX << 13);
|
|
|
|
if (motorLimitReached) {
|
|
errorGyroI[axis] = constrain(errorGyroI[axis], -errorGyroILimit[axis], errorGyroILimit[axis]);
|
|
} else {
|
|
errorGyroILimit[axis] = ABS(errorGyroI[axis]);
|
|
}
|
|
|
|
ITerm = errorGyroI[axis] >> 13;
|
|
|
|
//-----calculate D-term
|
|
if (axis == YAW) {
|
|
if (pidProfile->yaw_lpf_hz) PTerm = filterApplyPt1(PTerm, &yawFilterState, pidProfile->yaw_lpf_hz, getdT());
|
|
|
|
axisPID[axis] = PTerm + ITerm;
|
|
|
|
if (motorCount >= 4) {
|
|
int16_t yaw_jump_prevention_limit = constrain(YAW_JUMP_PREVENTION_LIMIT_HIGH - (pidProfile->D8[axis] << 3), YAW_JUMP_PREVENTION_LIMIT_LOW, YAW_JUMP_PREVENTION_LIMIT_HIGH);
|
|
|
|
// prevent "yaw jump" during yaw correction
|
|
axisPID[YAW] = constrain(axisPID[YAW], -yaw_jump_prevention_limit - ABS(rcCommand[YAW]), yaw_jump_prevention_limit + ABS(rcCommand[YAW]));
|
|
}
|
|
|
|
DTerm = 0; // needed for blackbox
|
|
} else {
|
|
delta = -(gyroRate - lastRate[axis]);
|
|
lastRate[axis] = gyroRate;
|
|
|
|
// Divide delta by targetLooptime to get differential (ie dr/dt)
|
|
delta = (delta * ((uint16_t) 0xFFFF / ((uint16_t)targetPidLooptime >> 4))) >> 5;
|
|
|
|
// Filter delta
|
|
if (pidProfile->dterm_lpf_hz) delta = filterApplyPt1((float)delta, &deltaFilterState[axis], pidProfile->dterm_lpf_hz, getdT());
|
|
|
|
DTerm = (delta * pidProfile->D8[axis] * PIDweight[axis] / 100) >> 8;
|
|
|
|
// -----calculate total PID output
|
|
axisPID[axis] = PTerm + ITerm + DTerm;
|
|
}
|
|
|
|
|
|
#ifdef GTUNE
|
|
if (FLIGHT_MODE(GTUNE_MODE) && ARMING_FLAG(ARMED)) {
|
|
calculate_Gtune(axis);
|
|
}
|
|
#endif
|
|
|
|
#ifdef BLACKBOX
|
|
axisPID_P[axis] = PTerm;
|
|
axisPID_I[axis] = ITerm;
|
|
axisPID_D[axis] = DTerm;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void pidSetController(pidControllerType_e type)
|
|
{
|
|
switch (type) {
|
|
default:
|
|
case PID_CONTROLLER_MWREWRITE:
|
|
pid_controller = pidMultiWiiRewrite;
|
|
break;
|
|
#ifndef SKIP_PID_LUXFLOAT
|
|
case PID_CONTROLLER_LUX_FLOAT:
|
|
pid_controller = pidLuxFloat;
|
|
#endif
|
|
}
|
|
}
|
|
|