mirror of
https://github.com/iNavFlight/inav.git
synced 2025-07-13 11:29:56 +03:00
38 lines
1.3 KiB
Markdown
38 lines
1.3 KiB
Markdown
# YuPiF4 by RcNet
|
||
|
||
An high quality flight controller for the most demanding pilotes.
|
||
|
||
## Description
|
||
|
||
The YuPiF4 is a 36x36mm (30.5x30.5 mounting holes) board with an F4 microcontroller.
|
||
|
||
## MCU, Sensors and Features
|
||
### Hardware
|
||
- MCU: STM32F405RTG6
|
||
- IMU: not yet defined
|
||
- IMU Interrupt: Yes
|
||
- BARO: No
|
||
- VCP: Yes
|
||
- Hardware UARTS: 3 with an inverter for SBus and a Smart-Port Pad to solder directly your SPort wire
|
||
- Blackbox: SD card slot
|
||
- PPM : A specific pad is available for PPM input
|
||
- Battery Voltage Sensor: Yes, directly connected, no wiring necessary
|
||
- Integrated Voltage Regulator: the board can be powered by your lipo (2S to 6S)
|
||
- Brushed Motor Mosfets: No
|
||
- Motor outputs : can drive up to 6 motors
|
||
- Buttons: Boot0 to enter in DFU mode### Features
|
||
- Current Sensor: Not implemented
|
||
- BlHeli passthrough: Yes
|
||
- WS2811 Led Strip: Yes (on motor output Pin 5)
|
||
- Transponder: No
|
||
|
||
### Extension Board
|
||
- An extension board with a GPS and a Baro will be available
|
||
|
||
## Designers and Maintainers
|
||
|
||
[RcNet](https://github.com/ted-rcnet) and [FaduF](https://github.com/Faduf)
|
||
|
||
## Manufacturers and Distributors
|
||
|
||
This board is currently in the prototype phase. Only small batches were manufactured for testing.Website : http://www.yupif4.com/
|