Bring back auto-generation of control ids. In this version, both the
header and the source files are generated from a single YAML file that
stores all control definitions. This allows centralising controls in a
single file, while the previous version required keeping both
declarations (in a header) and documentation (in a the source) in sync
manually.
Using YAML as a format to store control definitions is a trade-off
between ease of use (there are many YAML parsers available) and
simplicity (XML was considered, but would have lead to more complex
processing). A new build time dependency is added on python3-yaml, which
should be available as a package in all distributions and build
environments.
The YAML format is likely to change over time as we improve
documentation of controls, the first version simply copies the
information currently available. Future improvements should also include
a YAML schema to validate the YAML source file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Since doxygen version 1.8.16 the following warnings are reported:
warning: Tag 'PERL_PATH' at line 2138 of file 'Documentation/Doxyfile.in' has become obsolete.
This tag has been removed.
warning: Tag 'MSCGEN_PATH' at line 2160 of file 'Documentation/Doxyfile.in' has become obsolete.
This tag has been removed.
Remove the two tags to fix the warnings.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The ipa includes are located in include/libcamera/ipa/. This gives an
incorrect impression that they are a sub-part of the rest of the
libcamera API, while they are the API towards the IPA the same way that
include/libcamera/ contains the API towards applications. To clarify
this, move them to include/ipa/.
The IPA headers are however still part of libcamera, so installing them
to ${prefix}/include/ipa/ would make little sense. To fix this, move the
application facing API to ${prefix}/include/libcamera/libcamera/ when
installed, and the IPA to ${prefix}/include/libcamera/ipa/. When major
versions of libcamera will be released, they could then be installed
side by side in ${prefix}/include/libcamera-${version}/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
The bound method classes are not part of the public API, even though
they need to be exposed to applications due to the Object and Signal
template methods that use them. They are excluded from documentation
generation through EXCLUDE_SYMBOLS, but the corresponding .h file is
still listed in the generated documentation. Fix this by excluding the
bound_method.{h,cpp} files themselves.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Move the Slot* classes to bound_method.{h,cpp} and rename them to
Bound*Method*. They will be reused to implement asynchronous method
invocation similar to cross-thread signal delivery.
This is only a move and rename, no functional changes are included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Move the introduction content from the index.rst to the README.rst so
that it can also be found quickly from the top level.
Include the README.rst directly into the index.rst to continue serving
it as the front page material.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add an IPAProxy class whose implementations will act as a proxy between a
pipeline handler and an isolated IPA interface. Also add an IPAProxyFactory
that will construct the IPAProxy implementations as necessary.
Update Doxygen to ignore the directory where IPAProxy implementations will
reside.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Commit b817bcec6b ("libcamera: Auto generate version information")
generates version information in order to automatically include it
various locations (Sphinx and Doxygen documentation, libcamera::version
variable available at runtime, and version.h available at compile time).
Unfortunately this causes lots of unnecessary rebuilds when modifying
the git tree state, which hinders development.
The problem is caused by the generated version.h being listed as a
dependency for the whole libcamera. This is required as meson (to the
best of my knowledge) doesn't provide a way to explicitly specify the
dependency of a single object file (camera_manager.o in this case, as
camera_manager.cpp is the only consumer of the generated version string)
on the custom target used to generate version.h. The dependency can't be
automatically detected at build time, like dependencies on normal
headers that are generated by parsing the source, because the version.h
header may not exist yet. The build could then fail in a racy way.
This change attempts at solving the issue by generating a version.cpp
instead of a version.h to set the git-based version. This minimises the
number of files that need to be rebuild when then git tree state
changes, while retaining the main purpose of the original automatic
version generation, the ability to access the git-based version string
at runtime. We however lose the ability to access git-based version
information at build time in an application building against libcamera,
but there is no expected use case for this.
The version string is moved from the libcamera namespace to the
CameraManager class in order to avoid including version.h inside
libcamera (in version.cpp and in camera_manager.cpp), which would create
dependencies causing more rebuild steps, as described above.
On the other hand, major, minor and patch level version numbers are
useful at build time. This commit changes the generation of version.h in
order to add three macros named LIBCAMERA_VERSION_MAJOR,
LIBCAMERA_VERSION_MINOR and LIBCAMERA_VERSION_PATCH for this purpose.
version.h is not included by any other libcamera header or source file,
and thus doesn't force a rebuild of the library.
The Sphinx and Doxygen documentation keep their git-based version
information, which is set during the configuration of the build and then
doesn't track git commits. We may want to investigate how to improve
this, but given that git-based version for the documentation has very
few use cases outside of tagging nightly builds, this isn't considered
an issue at the moment.
The documentation install directory now uses the base version string, in
order to avoid increasing the number of documentation directories
needlessly. This shouldn't cause any issue as the API should not change
without a change to the version number.
The version number generation and handling code now also standardises
the version variables to not start with a 'v' prefix in meson, in order
to simplify their handling. The prefix is added when generating the
relevant files.
Note that we go back to specifying the fallback version in the main
meson.build, in the call to the project() function. For the time being I
believe this should be a good compromise to avoid unnecessary
recompilation, and moving the fallback version to a different file for
tarball releases can be built on top of this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The doc_install_dir is longer than 80 chars. Wrap it accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Generate a version string, and provide a global string object which
allows applications to interrogate the current libcamera version
information.
The version header is automatically updated by meson on each build.
The string roughly follows the semver [0] conventions of
major.minor.patch-label as a value.
[0] https://semver.org/
A script (utils/gen-version.sh) is provided which is modelled upon the
processing from autoconf's git-version-gen. The gen-version.sh script
will look for tags in the form vX.Y as starting points for the version
string. While the repository does not have any matching tags, v0.0 will
be assumed, resulting in versions with both major and minor being set to
'0', and the patch count resulting from the number of patches in the
history to that point.
Finally, a uniquely identifying shortened hash is provided from git:
v0.0.509+0ec0edf7
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The current project brief lacks any quotation marks, and causes the
Doxygen API documents to show the header "libcameraframework".
Replace the simplistic definition with a better brief, and ensure
quotation marks are provided to maintain spacing.
Fixes: 53c4d4c34f ("Documentation: Generate source code documentation using Doxygen")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a set of data types to support controls:
- ControlValue stores a control type and value in a generic way
- ControlId enumerates all the control identifiers
- ControlIdentifier declares the types of a control and map their names
- ControlInfo stores runtime information for controls
- ControlList contains a set of control info and value pairs
The control definitions map is generated from the controls documentation
to ensure that the two will always be synchronised.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
To avoid hardcoding a dependency between the source and build
directories, use absolute paths for the Doxygen EXCLUDE files. The build
directory can now be placed in any location, not just a direct
subdirectory of the source directory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
We need a way to match pipelines with IPA modules, so add fields in
IPAModuleInfo to hold the IPA module API version number, the pipeline
name, and the pipeline version.
The module API version is used to determine the layout of struct
IPAModuleInfo.
Also update IPA module tests and Doxygen accordingly. Doxygen needs to
be updated to accomodate __attribute__((packed)).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Consistently go for 4 spaces indentation, and always put a space between
the colon in argument lists, as per the examples from the meson
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement a class to wrap around an IPA module shared object.
For now, just load a struct IPAModuleInfo with symbol name
ipaModuleInfo from an IPA module .so shared object.
Also provide a public header file including the struct IPAModuleInfo,
structured such that both C and C++ IPA modules are supported.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
A udev-based device enumerator is not sufficient, since libudev is an
optional dependency, or udev might fail. In these cases, we should fall
back to using sysfs to enumerate devices.
Add a DeviceEnumeratorSysfs class which is a specialization of
DeviceEnumerator that uses sysfs to enumerate media devices on the
system.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Building the documentation reports warnings,
WARNING: Project targetting '>= 0.40' but tried to use feature introduced in '0.50.0': install arg in configure_file
WARNING: Project specifies a minimum meson_version '>= 0.40' but uses features which were added in newer versions:
* 0.50.0: {'install arg in configure_file'}
Due to the usage of the directive configure_file { install: false } in
Documentation/meason.build which is introduced in meson 0.50. As we do
not wish to install the Doxyfile no install_dir is set so there is no
need to explicitly state that it should not be installed. Silence the
warning by dropping the install directive.
Fixes: 53c4d4c34f ("Documentation: Generate source code documentation using Doxygen")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
libcamera depends on libudev for device enumeration. It is however
useful to allow building documentation without requiring the dependency
to be installed. Make the libudev dependency optional and compile the
udev-based device enumerator out when libudev is not present.
Note that while libcamera will compile without libudev, it will not be
able to enumerate devices. A sysfs-based device enumerator is planned as
a fallback but not implemented yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The documentation style for the Doxygen comment blocks is inconsistent
in the library. Document the expectations and update all existing
comment blocks to match.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Using std::move() on return statement of a method or on the its returned
value prevents the compiler from implementing copy-elision. Discourage
that in the coding style document.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
When a signal is connected to a member function slot, the slot is not
disconnected when the slot object is deleted. This can lead to calling a
member function of a deleted object if the signal isn't disconnected
manually by the slot object's destructor.
Make signal handling easier by implementing a base Object class that
tracks all connected signals and disconnects from them automatically
when the object is deleted, using template specialization resolution in
the Signal class.
As inheriting from the Object class may to a too harsh requirement for
Signal usage in applications, keep the existing behaviour working if the
slot doesn't inherit from the Object class. We may reconsider this later
and require all slot objects to inherit from the Object class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
clang-format produces better results than astyle as it can better match
the libcamera coding style. Default to clang-format over astyle, fall
back to astyle if clang-format isn't found, and add a --formatter
command line option to select a formatter manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Log categories are used to group log messages by topic. Introduce
support for categories by making the LOG() macro variadic. Support for
configuring log level per category will be introduced in a subsequent
commit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Object ownership is a complex topic that can lead to many issues, from
memory leak to crashes. Document the rules that libcamera enforces to
make object ownership tracking explicit.
This is a first version of the rules and is expected to be expanded as
the library is developed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Add the move semantics (move constructor and move assignment) to the
allowed C++11 features, as we extensively use them for the unique and
shared pointers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
We make use of the C++11 variadic templates feature in the signal&slot
implementation, mark it as allowed in the coding style documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
The pipeline handlers don't define APIs, neither public not internal.
There is thus no need to generate Doxygen documentation from thoses
classes. Add them to the EXCLUDE files pattern.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
The output of the sphinx-build for our documentation is overly verbose.
Reduce this output to warnings and errors with the '-q' quiet option.
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Until we have better Sphinx + Doxygen integration, replace the relative
external link to the API documentation with a placeholder directory,
which will be populated with the Doxygen-generated doc when exporting
documentation to the website. This is needed as the Sphinx documentation
is exported to the root of the website, linking to ../api-html is thus
not possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Add a link in the toctree to the API documentation.
sphinx doesn't seem to support relative external links, but we can trick
it into thinking the link is absolute by adding '#://' at the end.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The toctree is displayed in the navigation bar at the top of the page.
Add short names to the entries that replicate the names currently used
on libcamera.org.
Remove the link to the index and search pages, as the former is empty,
and the latter can be accessed directory from the navigation bar search
box.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The theme replicates the look and feel of the libcamera.org website.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Introduce a Signal class that allows connecting event sources (signals)
to event listeners (slots) without adding any boilerplate code usually
associated with the observer or listener design patterns.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Enable the QUIET mode of Doxygen so that warnings and errors from
Doxygen are more prominent in the build logs.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Provide a reference copy of the Developers Certificate of Origin.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There's no need to add a character on the left side of the ascii art
diagrams, provided that we indent them properly. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add a section to the coding style documentation to explain usage of the
checkstyle.py script.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The git clone command line is a (single line) block of shell code, mark
it appropriately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The various lists in the document are not quoted blocks. Don't indent
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The documentation is copied mostly verbatim from the website, with small
modifications to the ascii art diagrams to make them compile.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
sphinx only requires those directories to be present because they're
referenced in the configuration file. Remove the references and the
directories.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Extend the documentation build system to automatically generate
documentation from source code using Doxygen. This is currently separate
from the sphinx documentation, and should be integrated using the
breathe (and possibly exhale) extensions.
As the Documentation/meson.build file needs to reference the variables
holding the source files, move the Documentation directory to the end of
the subdirs() in the top-level meson.build.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Use the datadir option to select the directory in which to install
documentation. This defaults to $prefix/share so this doesn't introduce
any change in the default case.
While at it use join_paths() to join patch components instead of
hardcoding the / separator.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
The custom_target() function accepts an install_dir parameter. Along
with setting install to true, this can be used to replace the
install_subdir() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Utilise sphinx-build to generate documentation in HTML form, and
populate with some initial content.
An initial conf.py is generated from sphinx-quickstart and answering
initial questions.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
