Kiripolszky Károly
b5e0a82852
add Acro Trainer as flight mode to OSD
2018-07-02 15:16:51 +02:00
Michael Keller
463d7aa1c1
Merge pull request #6261 from jflyper/bfdev-fix-non-rearming
...
Call flashfsIsSupported instead of flashfsIsReady to check flash chip existence
2018-07-02 23:54:36 +12:00
jflyper
9d1e4db800
Call flashfsIsSupported instead of flashfsIsReady to check flash chip existence
2018-07-02 09:46:54 +09:00
Bruce Luckcuck
a769d43b90
Fix various compiler warnings for combinations of undefined USE_ features
2018-07-01 20:21:00 -04:00
Bruce Luckcuck
a754ad4f47
Change TASK_RX frequancy from 50hz (20ms) to 33hz (30ms)
...
Work around to better handle RX protocols that have frame intervals >= 20ms. Otherwise the task would run at the end of the task interval causing slower protocols to run again after the remaining delay. This interferes with rc interpolation and also the frame rate detection in rc smoothing.
2018-07-01 18:08:46 -04:00
mikeller
abc7cba3ce
Fixed compilation error when building USE_GPS_RESCUE without USE_GPS.
2018-07-01 23:17:23 +12:00
Michael Keller
8e9e757448
Merge pull request #6251 from mikeller/fix_disabling_gps_rescue_on_3d
...
Added disabling of GPS_RESCUE when 3D is enabled.
2018-07-01 22:32:40 +12:00
Michael Keller
bea4db7cbf
Merge pull request #6192 from Faduf/bugfix_yupif7_orientation
...
Bugfix board alignment YupiF7
2018-07-01 22:21:48 +12:00
mikeller
3f082b569b
Fixed broken targets.
2018-07-01 21:37:40 +12:00
mikeller
93ab648183
Added disabling of GPS_RESCUE when 3D is enabled.
2018-07-01 21:33:32 +12:00
Michael Keller
7936d2ec57
Merge pull request #6250 from mikeller/fix_rc_smoothing_validation
...
Fixed conditions for RC smoothing validation.
2018-07-01 21:29:59 +12:00
Faduf
ec9a713c2f
Revert change and use a specific config for YUPIF7
2018-07-01 11:15:59 +02:00
mikeller
b308eef6e9
Made it more positive.
2018-07-01 19:14:31 +12:00
mikeller
fb83ea4b52
Fixed conditions for RC smoothing validation.
2018-07-01 16:35:05 +12:00
mikeller
f354f8f350
Added SKYZONEF405 target.
2018-07-01 12:39:15 +12:00
Andi Kanzler
a63beb5239
Oops. Forget that extKey is now cms_key_e.
2018-07-01 01:05:45 +02:00
Andi Kanzler
1b98b1e2aa
Improvements from review.
2018-07-01 01:05:44 +02:00
Andi Kanzler
31830dc10c
Bring the CMS to the HoTT-Textmode.
2018-07-01 01:05:43 +02:00
Michael Keller
c6c3d0b5af
Merge pull request #6235 from etracer65/throttle_angle_correction
...
Fix throttle angle correction when smoothing throttle; reduce processing overhead
2018-06-30 18:46:51 +12:00
Michael Keller
3342f07c10
Merge pull request #6241 from mikeller/set_yaw_d_default_to_0
...
Set yaw D default to 0 since it is unused anyway.
2018-06-30 17:53:08 +12:00
mikeller
673ff77beb
Fixed firmware size issue on FURYF3OSD and STM32F3DISCOVERY.
2018-06-30 16:40:57 +12:00
mikeller
00228427da
Set yaw D default to 0 since it is unused anyway.
2018-06-30 15:25:50 +12:00
Michael Keller
6b6ad463df
Merge pull request #6227 from etracer65/gps_rescue_controls_fix
...
Revise GPS Rescue throttle and yaw handling to not modify rcCommand
2018-06-30 14:48:22 +12:00
Michael Keller
dfb19981db
Merge pull request #6213 from azolyoung/fixed_open_connection_bug_and_timeout_processing
...
fixed open connection twice times and timeout logic
2018-06-30 14:45:56 +12:00
Bruce Luckcuck
5cd886017d
Fix throttle angle correction when smoothing throttle; reduce processing overhead
...
Change the logic to not modify rcCommand directly and instead apply the additional throttle directly in the mixer.
Also move the logic to the attitude task instead of having it calculate in the PID loop. The logic relies on an angle that's only updated in the attitude task so there was no point in running the calculation every PID loop.
2018-06-28 15:56:01 -04:00
leocb
7df8075fa3
OSD G-force Fix unit test; use sqrtf
2018-06-28 16:15:16 -03:00
leocb
51e57199fb
OSD G-force - Fixes compile errors and optimize math
2018-06-28 12:16:25 -03:00
leocb
0ab2638b31
OSD G-force - requested changes
2018-06-28 11:32:37 -03:00
azol
8b98528590
fixed open connection twice times and timeout logic
2018-06-28 21:00:54 +08:00
Miguel Angel Mulero Martinez
f14c9cb929
Add OSD elements to order loop
2018-06-28 13:02:06 +02:00
Bruce Luckcuck
9b49d481e3
Fix setpoint rate sign, optimize code, cleanup from review
...
Also adds a `scaleRangef()` function to math.c
2018-06-27 19:27:22 -04:00
leocb
e2eca1b762
Added G-Force to the OSD
2018-06-27 13:56:26 -03:00
Bruce Luckcuck
0cd61c3a0f
Revise yaw rate calculation and defaults
2018-06-27 11:10:52 -04:00
Bruce Luckcuck
9868557c11
Revise GPS Rescue throttle and yaw handling to not modify rcCommand
...
Injecting new values directly into rcCommand to override pilot inputs does not work correctly when rc interpolation or smoothing is enabled. This is because the smoothing functions maintain an internal state that is used to produce the final rcCommand values. So in effect it re-overrides the values set by GPS Rescue.
Additionally, modifying rcCommand directly is undesirable because:
- It happens before rates are applied. So the pilot's rates will effect the control commanded by GPS Rescue.
- rcCommand values are used for more than input in the flight control. They also are used for stick commands, etc.
- In the case of throttle, various modifications can be additionally applied like throttle boost and throttle limit that may negatively effect GPS Rescue.
These changes revise the logic to only modify the commanded values used in the PID controller (yaw) and mixer (throttle) rather than attempting to override rcCommand.
2018-06-27 10:37:52 -04:00
Andrey Mironov
560f90f451
Fixed call to checkBootloaderRequest()
2018-06-26 12:47:00 +03:00
Andi Kanzler
010f5d5a34
Add MIN
2018-06-25 18:09:16 +02:00
Andi Kanzler
dfb4a2f954
Add remark
2018-06-25 16:09:13 +02:00
Andi Kanzler
f16874cdb0
Support for SUMD V3.
2018-06-24 18:21:26 +02:00
Michael Keller
1c081ae8c3
Merge pull request #6204 from mikeller/fix_rearming_without_gps_fix
...
Enabled rearming with 'GPS rescue' enabled and no GPS fix.
2018-06-24 21:29:36 +12:00
Michael Keller
c208d57ac6
Merge pull request #6196 from azolyoung/change_rcsplit_protocol_to_async
...
Change rcsplit protocol to async
2018-06-24 20:39:10 +12:00
mikeller
30b148c5c7
Enabled rearming with 'GPS rescue' enabled and no GPS fix.
2018-06-24 15:30:31 +12:00
s0up
44a790e64b
Merge branch 'master' of github.com:betaflight/betaflight into failsafe-fix
2018-06-23 19:27:33 -07:00
Michael Keller
e9494c8c60
Merge pull request #6202 from mikeller/fix_gps_on_smartport
...
Fixed GPS init on SmartPort.
2018-06-24 14:24:13 +12:00
azolyoung
5967b9b597
fixed the coding-style issues
2018-06-24 10:23:11 +08:00
mikeller
fecfd36825
Enabled gyro LPF2 on SPRACINGF3NEO.
2018-06-24 13:47:05 +12:00
mikeller
e9ab1daf5d
More feature slashing.
2018-06-24 12:47:57 +12:00
mikeller
4eaf28f4da
Fixed GPS init on SmartPort.
2018-06-24 12:39:03 +12:00
mikeller
d766bcd2e7
More flash space wrangling.
2018-06-24 12:02:15 +12:00
mikeller
7b4b47829e
Fixed SPRACINGF3NEO.
2018-06-24 10:32:20 +12:00
mikeller
79fd0b2c05
Dance around the volcano with STM32F3DISCOVERY.
2018-06-24 10:32:20 +12:00