11158 commits

This branch

This branch

All branches

Author	SHA1	Message	Date
Michael Keller	36c543e547	Merge pull request #5800 from etracer65/gyro_to_use_default_fix ... Fix dual gyro default logic	2018-05-04 21:14:00 +12:00
Michael Keller	f0ea0e81d4	Merge pull request #5765 from etracer65/gps_speed_units ... Fix GPS speed and max speed to respect the units selection	2018-05-04 21:11:49 +12:00
Michael Keller	75f82c7f2b	Merge pull request #5798 from Faduf/YupiF4_patch ... YupiF4 Motor output Patch	2018-05-04 15:32:14 +12:00
Michael Keller	b100840c26	Merge pull request #5808 from neilbalch/patch-2 ... Add more info to F405-CTR board docs	2018-05-04 15:09:35 +12:00
Neil B	9e6752198c	Make F405-CTR docs more readable	2018-05-03 18:03:10 -07:00
Neil	1fd1bdbb3f	Add softserial info and status LEDs	2018-05-03 14:53:18 -07:00
Neil	86c54ff3ae	Clarify resource command in F405-CTR docs	2018-05-03 14:27:32 -07:00
Neil	b8a9beb732	Add UART list for F405-CTR and update pinout	2018-05-03 12:20:59 -07:00
Neil	b95089da5d	Add note on possible pad conflict ... And fix terminology for RX5 pad description.	2018-05-03 08:10:37 -07:00
Michael Keller	40e8f77fed	Merge pull request #5802 from neilbalch/patch-1 ... Add Board documentation for Matek F405-CTR	2018-05-04 00:07:31 +12:00
Michael Keller	cb19bb16d4	Merge pull request #5793 from etracer65/max7456_double_increment ... Fix incorrect double increment in MAX7456 screen drawing	2018-05-03 23:32:21 +12:00
Michael Keller	48093e4428	Merge pull request #5786 from pulquero/esc-telemetry ... Improved distribution of telemetry bandwidth over sensors (fixes #5785).	2018-05-03 23:28:16 +12:00
Andrey Mironov	cb9e1ef58c	Merge pull request #5768 from etracer65/esc_combined_overflow ... Fix potential overflow in combined ESC sensor data	2018-05-03 11:00:28 +03:00
Andrey Mironov	87812963a5	Merge pull request #5781 from betaflight/aikonf4-doc-update ... Update Board - AikonF4.md	2018-05-03 10:59:21 +03:00
Neil	f679215d03	Fix file extension (oops!)	2018-05-02 22:12:23 -07:00
Neil	4d95369b1f	Add Board documentation for Matek F405-CTR	2018-05-02 22:09:04 -07:00
Michael Keller	2a91eaac8d	Merge pull request #5801 from jflyper/bfdev-exclude-kissfcv2f7-from-ci ... Exclude KISSFCV2F7 from CI	2018-05-03 14:12:29 +12:00
Michael Keller	69ba290c8f	Merge pull request #5797 from jflyper/bfdev-change-M25P16-to-FLASH ... Change M25P16 to FLASH where appropriate	2018-05-03 14:02:39 +12:00
jflyper	7a03e034c9	Merge pull request #5757 from SteveCEvans/revonano_baro ... Revonano Baro is on I2C bus 3	2018-05-03 10:57:17 +09:00
jflyper	4ee3210df8	Merge pull request #5789 from SteveCEvans/i2cunstick ... Use i2cUnstick() from bus_i2c_hal.c	2018-05-03 10:56:14 +09:00
Michael Keller	8720447eea	Merge pull request #5799 from etracer65/midelicf3_flash_reduction ... Fixed flash overflow for MIDELICF3	2018-05-03 13:34:30 +12:00
Michael Keller	d85f263028	Merge pull request #5792 from etracer65/max7456_init ... Avoid 0xFF character when writing to MAX7456 in auto-increment mode	2018-05-03 13:11:21 +12:00
jflyper	77cbeab783	Exclude KISSFCV2F7 from CI	2018-05-03 09:42:10 +09:00
Bruce Luckcuck	8abbb84a55	Fix dual gyro default logic ... With the changes to add dual gyro support and the SPRACINGF7DUAL target, the defaulting logic of which gyro(s) to use was changed. The logic defaulted to using "BOTH" unless the target specifically selected a gyro. I think this logic is backwards in that the first gyro should be selected by default unless the target specifies something different. The previous logic would cause all of the previous dual-gyro targets to default to "BOTH" even though they have different gyro types. This is probably not a good idea and definitely would cause an unexpected change for the users. The SPRACINGF7DUAL target has two of the same gyro so defaulting to "BOTH" is appropriate. So now the target specifies that both gyros should be used in this case as the default.	2018-05-02 20:06:08 -04:00
Mark Hale	f2f5106101	Improved distribution of telemetry bandwidth over sensors (fixes #5785). ... Signed-off-by: Mark Hale <mark.hale@physics.org>	2018-05-02 22:18:46 +01:00
Bruce Luckcuck	87e6497c77	Fixed flash overflow for MIDELICF3	2018-05-02 17:10:50 -04:00
Faduf	1c7053d98d	YupiF4 Motor output Patch	2018-05-02 19:41:16 +02:00
jflyper	36fb439d45	Change M25P16 to FLASH where appropriate	2018-05-02 21:26:47 +09:00
Michael Keller	6d72a853dd	Merge pull request #5795 from etracer65/esc_current_warning_default ... Default OSD ESC current alarm to off	2018-05-02 16:31:06 +12:00
Bruce Luckcuck	7e8bd7bb34	Default OSD ESC current alarm to off ... The osd_esc_current_alarm was added but never assigned a default value. Therefore it defaulted to 0 instead of off (-1). This resulted in OSD warnings if the ESCs weren't providing current data as the test looked for values >= the warning setting.	2018-05-01 14:06:49 -04:00
Bruce Luckcuck	b328d1dbbc	Fix incorrect double increment in MAX7456 screen drawing ... The for loop variable was being erroneously double incremented when a character was updated. This would cause fewer characters to be checked/updated during each cycle based on how many were found to be updated.	2018-05-01 12:38:45 -04:00
Bruce Luckcuck	932998a33c	Avoid 0xFF character when writing to MAX7456 in auto-increment mode ... The 0xFF character is used as an "escape" character by the MAX7456 when using auto-increment mode. The last byte of the characters used for the logo is the 0xFF character and this was causing the version and CMS instructions to not display. Changed the logic to avoid the 0xFF character during the auto-increment phase and added a second pass if needed to update those characters in direct addressing mode.	2018-05-01 12:07:40 -04:00
jflyper	8bb6d42928	Merge pull request #5769 from jflyper/bfdev-omninxt ... New target OmniNXT F4/F7	2018-05-01 11:09:39 +09:00
jflyper	7720e57d5c	Merge pull request #5776 from jflyper/bfdev-handle-overloaded-cs-pin ... FLASH: Handle overloaded SPI CS pin	2018-05-01 10:55:13 +09:00
SteveCEvans	d009e40e38	Remove hardcoded numbers from i2cUnstick()	2018-05-01 00:18:45 +01:00
Michael Keller	fba59c32b6	Merge pull request #5676 from conkerkh/CMS_FIX ... Disable CMS when USB is connected on CDC_HID enabled targets.	2018-05-01 11:07:56 +12:00
SteveCEvans	1f2ebe89f5	Merge branch 'master' into revonano_baro	2018-04-30 23:04:26 +01:00
SteveCEvans	2c4287d693	Baro is on I2CDEV_3 on Revo Nano	2018-04-30 23:03:57 +01:00
SteveCEvans	e282e4b3de	Remove hard coded numbers	2018-04-30 22:39:53 +01:00
SteveCEvans	30db7b75cb	Use i2cUnstick() from bus_i2c_hal.c	2018-04-30 22:25:53 +01:00
borisbstyle	d5380a670b	Merge pull request #5782 from etracer65/video_type_enum ... Add descriptive enumeration for vcd_video_system values	2018-04-30 08:18:24 +02:00
Chris	8cbd91c9ee	Duplicate include	2018-04-30 01:02:02 +02:00
Chris	641e555e7b	Check if HID is actually enabled in options.	2018-04-30 00:51:14 +02:00
Chris	b824f900d9	Fixup as in PR commits.	2018-04-30 00:46:21 +02:00
Bruce Luckcuck	1bfc2c2fa7	Add descriptive enumeration for vcd_video_system values ... Previously the values were numeric and ranged from 0 to 2. This change adds a descriptive value list as "AUTO", "PAL" and "NTSC".	2018-04-28 11:08:57 -04:00
jflyper	ddd0dd14c8	Check if a CS pin is already owned by somebody else	2018-04-28 23:02:35 +09:00
jflyper	ac13e87c86	OmniNXT F4/F7 support	2018-04-27 09:42:21 +09:00
J Blackman	02efd46833	Merge pull request #5767 from blckmn/licence_update ... Removed excess spaces on licences	2018-04-26 17:10:26 +10:00
Bruce Luckcuck	f8bee2feff	Fix potential overflow in combined ESC sensor data ... The calculated combined ESC sensor data could potentially overflow in some extreme cases and the problem would be more likely in cases with more than 4 motors.	2018-04-25 12:02:25 -04:00
blckmn	a9f74cd6df	Removed excess trailing spaces before new lines on licenses.	2018-04-25 20:58:00 +10:00