Michael Jakob
31dd2fc223
G-Tune documentation update
2015-10-04 18:37:22 +02:00
Michael Jakob
4bed8bc78a
Add G-Tune for NAZE32PRO target
2015-10-04 18:37:22 +02:00
Michael Jakob
afed9a5bba
G-Tune fix for PID controller 2 (LuxFloat)
2015-10-04 18:37:21 +02:00
Michael Jakob
a8aad05c5a
Added additional yaw handling according to Spirre's PID2 testing.
...
Flight tested with PID3 and PID5 (still functional without negative side
effects)
Additional code style updates of gtune.c
2015-10-04 18:37:21 +02:00
Michael Jakob
53531224be
Make G-Tune more configurable
...
- add two new CLI paramaters "gtune_settle_time" and
"gtune_average_cycles"
- the settle time is not depending on looptime anymore
- updated default setting to cover e wider range of copters
- remove lower limit for P value for CLI (Zero P is now posible, but
schould be used with care)
- Documentation updates
2015-10-04 18:37:21 +02:00
Michael Jakob
ef5887856d
Enable G-Tune on Sparky
...
Fix code style
2015-10-04 18:37:20 +02:00
Michael Jakob
fe2f2f3053
Fix some BlackBox isues, remove redundant code from PID controllers.
2015-10-04 18:37:20 +02:00
Michael Jakob
e7e297ad53
Modified behavior of G-Tune switch and storing the tuned P values
...
G-Tune documentation update
G-Tune will only activated and deactivated when armed.
G-Tune should deactivated while the copter is airborne.
Tuned P values will only be stored when G-Tune is enabled while disarmed
and G-Tune was used before.
2015-10-04 18:37:19 +02:00
Michael Jakob
6c022455c5
Add BlackBox recording for G-Tune
2015-10-04 18:37:19 +02:00
Michael Jakob
daceb2db9a
Fix G-Tune for LuxFloat PID controller
...
G-Tune documentation fix
2015-10-04 18:37:18 +02:00
Michael Jakob
cb5f81ca98
G-Tune documentation update
2015-10-04 18:37:18 +02:00
Michael Jakob
43f5792a61
G-Tune port from Harakiri
...
Enabled for NAZE, ALIENWWIIF1 and ALIENWIIF3 targets
Implement G-Tune for all PID controllers
The G-Tune tuning results will be save if G-Tune mode will be disabled
during copter is disarmed.
Update PID controller and G-Tune documentation
2015-10-04 18:37:18 +02:00
Michael Jakob
b20dc77a74
Harakiri PID controller make hardcoded parameters configurable
2015-10-04 18:37:17 +02:00
borisbstyle
02a252c53e
Update Binaries (Configurator 0.66 Support)
...
Remove more targets
2015-10-04 14:40:26 +02:00
borisbstyle
5f3538d4d3
Change Default PID for starters
2015-10-04 14:36:13 +02:00
Austin St. Aubin
c6ff73584d
Custom Airplane with Differential Thrust
...
Added notes on how to make a custom airplane configuration that supports differential thrust.
2015-10-03 23:17:14 -05:00
borisbstyle
c2eee64285
Remove Confusing targets
2015-10-04 03:09:10 +02:00
borisbstyle
5a871928af
Get targetLooptime from gyro_sync.h
2015-10-04 03:06:09 +02:00
borisbstyle
9c2c099702
Merge pull request #16 from MotoLab/dummy_looptime
...
MSP LOOP_TIME commands for Configurator 0.66
2015-10-04 02:39:32 +02:00
Moto Moto
fe89535126
MSP LOOP_TIME commands for Configurator 0.66
2015-10-03 17:13:37 -05:00
borisbstyle
421f0b81e0
Update Binaries
...
Failsafe Fix
2015-10-02 23:39:57 +02:00
borisbstyle
52172ef50f
Betaflight simplified Failsafe // Fixes failsafe issues
2015-10-02 23:32:45 +02:00
Dominic Clifton
07d985ba5c
More MPU cleanups.
2015-10-02 15:43:44 +01:00
Dominic Clifton
aac13914f9
LPF setting is not needed to detect the gyro sensor, only when it's
...
initialised; now the lpf setting is passed to gyroInit().
This saves a bit of code size and ram as well as making the code
cleaner.
2015-10-02 15:43:44 +01:00
Dominic Clifton
06ceac0614
Remove unused variable warnings when no SPI sensors are used.
2015-10-02 15:43:44 +01:00
Dominic Clifton
6fb500f580
NAZE32 - Add support for BMP280.
2015-10-02 15:43:44 +01:00
Richard Lehey
501c83f851
Add support for new BMP280 barometer
2015-10-02 15:43:44 +01:00
Dominic Clifton
85ba1eb0bd
Add support for MPU6500 connected via I2C.
2015-10-02 15:43:44 +01:00
Dominic Clifton
678c0413cb
Relocate and use some of the common MPU code from MPU6000 into
...
accgyro_mpu.c.
2015-10-02 15:43:44 +01:00
Dominic Clifton
0361d161fb
Relocate and use some of the common MPU code from MPU6500 into
...
accgyro_mpu.c.
2015-10-02 15:43:44 +01:00
Dominic Clifton
da46d9f1d2
Relocate and use some of the common MPU code from MPU3050 into
...
accgyro_mpu.c.
2015-10-02 15:43:44 +01:00
Dominic Clifton
b46d56a5bd
Relocate some of the common MPU code from MPU6050 into accgyro_mpu.c.
2015-10-02 15:43:44 +01:00
Dominic Clifton
9f95334347
Merge pull request #1365 from sorki/patch-1
...
Fix broken LedStrip.md link in docs
2015-10-02 12:27:58 +01:00
Richard Marko
8fb2cf6649
Fix broken LedStrip.md link in docs
2015-10-02 00:46:07 +02:00
borisbstyle
cdbd794974
Update Binaries
2015-10-01 22:02:35 +02:00
borisbstyle
ab869f326c
Change INT PID Defaults
2015-10-01 21:53:40 +02:00
borisbstyle
fa9cd0440b
FastPWM as part of Oneshot125 (dynamic oneshot)
...
bool correction
IdlePulse
2015-10-01 17:07:53 +02:00
borisbstyle
77534ed6f6
Merge remote-tracking branch 'henn1001/FastPWM' into betaflight
...
Conflicts:
src/main/drivers/pwm_mapping.c
2015-10-01 16:01:15 +02:00
borisbstyle
4dcd8354da
Rx should be processed at least once
...
This is to prevent an extreme edge case on slow boards to make sure rx
update still occurs
2015-10-01 15:11:04 +02:00
borisbstyle
b523ff1557
imuUpdateAccDelayed unnecessary
2015-10-01 13:49:32 +02:00
borisbstyle
4ccf9eac2e
Merge pull request #15 from 4712/betaflight
...
Fix: buzzer often starts beeping continuously on ESCs read
2015-10-01 07:44:20 +02:00
Nicholas Sherlock
ca2a6d9cdd
Fix VCP support for new Tx bytes free vtable entry
2015-10-01 17:25:27 +13:00
Nicholas Sherlock
94affd5841
Fix truncated blackbox headers on fast looptimes/slow UARTs
...
As a consequence, now supports 19200 baud for Blackbox logging
2015-10-01 16:48:56 +13:00
Nicholas Sherlock
6e504ca52a
Ability to see how many Tx bytes are free in serial port buffer
2015-10-01 16:48:56 +13:00
4712
3dcca8c9d5
Fix: buzzer often starts beeping continuously on ESCs read 2
2015-10-01 01:16:24 +02:00
4712
3b3e630bc4
Revert "Fix: buzzer often starts beeping continuously on ESCs read"
...
This reverts commit 2afeefb753
2015-10-01 01:12:05 +02:00
4712
2afeefb753
Fix: buzzer often starts beeping continuously on ESCs read
2015-10-01 01:06:06 +02:00
4712
50d44ea295
Merge pull request #1 from borisbstyle/betaflight
...
Betaflight
2015-09-30 21:55:04 +02:00
4712
1657661a60
Delete NewUser.txt
2015-09-30 21:53:43 +02:00
Dominic Clifton
d0b940bf75
Merge pull request #1221 from Echelon9/feature/make-help
...
Add new Makefile feature, try 'make help'
2015-09-30 15:29:03 +01:00
