Michael Keller
10c18d8473
Merge pull request #4428 from McGiverGim/bf-osd_stats_only_when_enabled
...
Show stats only if enabled
2017-10-24 22:52:37 +13:00
Miguel Angel Mulero Martinez
dadedd059f
Show stats only if enabled
...
If no enabled stat to show, don't show the stats page in the OSD
2017-10-24 10:14:15 +02:00
Michael Keller
94db0c925b
Merge pull request #4427 from jamming/KakuteF4-V2
...
Update KakuteF4 to V2, add UART4, UART5, I2C1 and BMP280 baro
2017-10-24 18:43:39 +13:00
jamming
37b68afff0
move TARGET_IO_PORTD defination
2017-10-24 11:58:10 +08:00
jamming
cd4e8e9b15
Code standardization
2017-10-24 10:34:48 +08:00
jamming
5d53e49942
Update KakuteF4 to V2, add UART4, UART5, I2C1 and BMP280
2017-10-24 10:06:50 +08:00
Michael Keller
e1068b3057
Merge pull request #4419 from mikeller/revo-additional-baro-support
...
CF/BF - Add BMP085/BMP280 baro support to REVO targets.
2017-10-24 09:13:00 +13:00
Michael Keller
219e4be81b
Merge pull request #4424 from vladisenko/fix-a7105-timeout
...
Fix mistake in comparison operator. Fix whitespace and line breaks.
2017-10-24 09:12:46 +13:00
e.vladisenko
391da169e2
Fix mistake in comparison operator. Fix whitespace and line breaks.
2017-10-23 20:05:04 +03:00
Dominic Clifton
4dd8bfa2e2
Merge pull request #2967 from cleanflight/revo-additional-baro-support
...
CF/BF - Add BMP085/BMP280 baro support to REVO targets.
2017-10-23 03:45:21 +13:00
Michael Keller
e6e08984dd
Merge pull request #4412 from mikeller/enabled_slew_filter_for_mpu6500
...
Enabled gyro slew filter for gyros using the MPU6500 driver (needed for ICM20608G).
2017-10-23 03:42:49 +13:00
Michael Keller
a44c2c34c5
Merge pull request #4416 from codecae/crsf_rx_telemetry_tune
...
Tuned CRSF rx and telemetry
2017-10-23 03:27:41 +13:00
Michael Keller
f37066eb12
Merge pull request #4418 from wind0r/remove_esc_sensor_if_dshot_is_undefined
...
remove esc sensor if dshot is undefined
2017-10-23 03:25:11 +13:00
Curtis Bangert
97f173dfbb
Tuned CRSF rx and telemetry
2017-10-21 19:34:32 -04:00
Steffen Windoffer
721ba0d047
remove esc sensor if dshot is undefined
2017-10-21 21:50:04 +02:00
MJ666
71ccfdd326
Merge pull request #4417 from AlienWiiBF/HMC5883L_gain_fix
...
Fix HMC5883L gain calculation
2017-10-21 20:04:53 +01:00
Michael Jakob
785070d75e
Fix HMC5883L gain calculation
2017-10-21 20:29:16 +02:00
Michael Keller
42f1bfef0f
Merge pull request #4404 from mikeller/fix_vtx_rtc6705_no_power_pin
...
Fixed power configuration for RTC6705 based VTX with no power pin.
2017-10-21 19:10:41 +13:00
mikeller
dfd92688e0
Fixed power configuration for RTC6705 based VTX with no power pin.
2017-10-21 18:37:25 +13:00
mikeller
814597ae9f
Enabled gyro slew filter for gyros using the MPU6500 driver (needed for ICM20608G).
2017-10-21 13:15:43 +13:00
Michael Keller
40f224bb81
Merge pull request #4401 from mikeller/clarify_pull_request_template
...
Made a clarification to the pull request instructions in the template.
2017-10-21 09:57:49 +13:00
Michael Keller
485fb84a6a
Merge pull request #4400 from mikeller/fixed_crash_recovery_beeper
...
Added switching off of beeper in all cases when crash recovery is disabled.
2017-10-21 09:55:18 +13:00
mikeller
46624d28ca
Added switching off of beeper in all cases when crash recovery is disabled.
2017-10-21 09:12:46 +13:00
Michael Keller
5e77763c7b
Merge pull request #4224 from jflyper/bfdev-max7456-add-debug-mode
...
MAX7456: Convert debug statements into debug modes
2017-10-21 09:05:06 +13:00
jflyper
e50414459d
Forgot about this one 😭
2017-10-20 23:48:26 +09:00
Michael Keller
97c3e4b6f4
Merge pull request #4265 from ethomas999/etVtxCfgCMSFreqViaMsp
...
Implement 'vtx_' settings and SetFreqByMHzMsp support
2017-10-20 17:21:37 +13:00
ethomas999
8a27c9e194
Implemented 'vtx_' settings and SetFreqByMHzMsp support
...
Implemented 'vtx_' settings for SmartAudio and Tramp
Added 'vtx_freq' setting for SmartAudio and Tramp
SmartAudio-CMS fixes and improvements
Added SetFreqByMHzMsp support for SmartAudio and Tramp
2017-10-19 23:32:24 -04:00
Michael Keller
8d1a90b999
Merge pull request #4251 from allenfor2017/add-runcam-device-protocol
...
Add RunCam Device Protocol Support(DisplayPort, DeviceSetting Access,…
2017-10-20 13:02:16 +13:00
Michael Keller
b7fe3e203e
Merge pull request #4402 from Vidalcris/patch-5
...
Crash recovery little change for Beeper
2017-10-20 12:45:49 +13:00
Vidalcris
eb9db1ea64
Crash recovery little change for Buzzer
...
I did a mistake in my latest PR and the buzzer was not working at all when quad disarmed.
Now it work and it will also stop beeping if we disarm during a crashrecovery.
2017-10-20 01:19:31 +02:00
mikeller
2447805fbe
Made a clarification to the pull request instructions in the template.
2017-10-20 12:09:39 +13:00
Michael Keller
184fc3c7a2
Merge pull request #4399 from Vidalcris/patch-4
...
Crash recovery - Fixes #4379
2017-10-20 11:47:18 +13:00
Vidalcris
70973bad04
Crash recovery - Fixes #4379
2017-10-19 23:35:06 +02:00
allenyan
4df1084d1d
Add RunCam Device Protocol Support(DisplayPort, DeviceSetting Access, 5 key osd cable simulation)
2017-10-19 16:19:27 +08:00
Michael Keller
3ff074dfbe
Merge pull request #4382 from mikeller/added_w25q256_flash_support
...
Added support for the Winbond W25Q256 flash chip (32MB).
2017-10-19 19:10:40 +13:00
Michael Keller
a9b97f0ccd
Merge pull request #4325 from croghostrider/HOTT-telemetry-fix-from-IvaAlex
...
HOTT telemetry fix #3145
2017-10-19 17:19:49 +13:00
croghostrider
32688fc7df
HOTT telemetry fix
...
Pull Request with the changes from @IvaAlex
2017-10-19 00:17:27 +02:00
Michael Keller
7b6ac7577e
Merge pull request #4376 from mikeller/remove_f1_targets_from_ci
...
Removed F1 targets from the target lists used for CI, added warning about deprecation.
2017-10-19 02:41:41 +13:00
Michael Keller
a5aa3c148c
Merge pull request #4266 from bforbort/LandDetect
...
Disarm if crash recovery activated in failsafe mode
2017-10-19 02:27:40 +13:00
Michael Keller
2832150051
Merge pull request #4389 from jamming/kakuteF7Test
...
Create a new target KakuteF7
2017-10-19 02:13:35 +13:00
Blaine
9556ea6bf5
Squash and rebase
2017-10-18 00:38:13 -07:00
jamming
d328143868
Creat new target KakuteF7 log
2017-10-18 12:09:50 +08:00
Michael Keller
3038eb79ea
Merge pull request #4317 from AlienWiiBF/AK8963_SPI
...
Configurable compass drivers based on jflyper's PR #3613
2017-10-18 11:18:05 +13:00
Michael Jakob
ae8256f142
Updates according to ledvinap's recomendations
2017-10-17 23:28:18 +02:00
Michael Keller
5ae3933db4
Changed make target for 'all' to not include unsupported, added 'all_with_unsupported' (formerly 'all') and 'unsupported' targets.
2017-10-18 09:56:44 +13:00
Michael Jakob
60b8e0f05e
Configurable compass drivers based on jflyper's PR #3613
...
Eliminate static variables in mag drivers
AK8975 and HMC5883l driver cleanup
replace magic numbers with definitions
Switched AK8963/Ak8975 to 16 bit mode
Update Mag gain calculations to use integer varables (ledvinap
recomendation)
Update interrupt handling for HMC5883L
Reschedule compass task only if slave mode is realy active
Change bustye definitions to an enumeration set
Fix dispatch functions and remove redundant dispatch functions from Baro
and Mag drivers
Fix unittest
2017-10-17 22:22:11 +02:00
mikeller
e70de9d06b
Added support for the Winbond W25Q256 flash chip (32MB).
2017-10-17 17:57:37 +13:00
Michael Keller
316845227d
Merge pull request #4378 from Jahnkeanater/patch-4
...
Change VTX colors to custom defined colours
2017-10-17 14:55:01 +13:00
Jahnkeanater
81705f5dcd
Change VTX colors to custom defined colours
2017-10-16 20:34:15 -05:00
Michael Keller
e6fdd266e0
Removed F1 targets from the target lists used for CI, added warning about deprecation.
2017-10-17 11:34:09 +13:00
