Mirror/inav
1
0
Fork 0
mirror of https://github.com/iNavFlight/inav.git synced 2025-07-12 19:10:27 +03:00
Code Issues Wiki Activity
inav/docs/ADSB.md
error414 439f0dcccd Adsbee1090
2025-03-01 22:55:45 +01:00

1.7 KiB
Raw Permalink Blame History

ADS-B

Automatic Dependent Surveillance Broadcast is an air traffic surveillance technology that enables aircraft to be accurately tracked by air traffic controllers and other pilots without the need for conventional radar.

Current state

OSD can be configured to shows the closest aircraft.

Hardware

All ADSB receivers which can send Mavlink ADSB_VEHICLE message are supported

TT-SC1 settings

  • download software for ADSB TT-SC1 from https://www.aerobits.pl/product/aero/ , file Micro_ADSB_App-vX.XX.X_win_setup.zip and install it
  • connect your ADSB to FC, connect both RX and TX pins
  • in INAV configurator ports TAB set telemetry MAVLINK, and baudrate 115200
  • go to CLI in inav configurator and set serialpassthrough for port you connected ADSB serialpassthrough [PORT_YOU_SELECTED - 1] 115200 rxtx and close configurator
  • open ADSB program you installed, got to settings and set "telemetry" = MAVLINK,

PCB board for TT-SC1-B module https://oshwlab.com/error414/adsb-power-board TT-SC1 settings

ADSBee 1090 settings

  • connect to ADSBee1090 via USB and set COMMS_UART to mavlink2
    AT+PROTOCOL=COMMS_UART,MAVLINK2
    AT+BAUDRATE=COMMS_UART,115200
    It's recommended to turn of wifi
    AT+ESP32_ENABLE=0
    AT+SETTINGS=SAVE
  • in INAV configurator ports TAB set telemetry MAVLINK, and baudrate 115200
  • https://pantsforbirds.com/adsbee-1090/quick-start/