Homer
515e55ef0a
Rename FAKE to VIRTUAL ( #12493 )
...
* use_fake_xyz to use_virtual_xyz
* xyz_fake to xyz_virtual
* other fake to virtual
* all files fake to vrtual
* last touch on fake to virtual
2023-03-14 12:35:39 +01:00
Mark Haslinghuis
4f5b99d34c
CONFIG: Update FOXEERH743 ( #12494 )
2023-03-14 16:50:31 +11:00
J Blackman
f69fe363c8
Remove SPEK1024 as the default RX (set to NONE) ( #12500 )
2023-03-13 20:21:03 +11:00
Mark Haslinghuis
53dbad7e1a
CONFIG: Fix blackbox ( #12511 )
...
* CONFIG: Fix blackbox
* Remove blackbox from MATEKH743
2023-03-13 20:15:32 +11:00
howels
5a2aad53ad
Prevent SPRACINGH7RF accidentally using external storage for logging when required for EXST ( #12495 )
2023-03-12 08:14:10 +11:00
J Blackman
50de91730f
FIX: Missing USE_BLACKBOX ( #12504 )
2023-03-11 19:46:08 +11:00
Mark Haslinghuis
33f258d967
Fix RX protocol config ( #12497 )
...
* Fix RX protocol config
* Fixes per review
2023-03-11 10:36:03 +11:00
J Blackman
5c43f369f2
FIX CONFIG: Adding USE_FLASH as a permanent fixture for those targets with flash ( #12498 )
2023-03-11 10:29:13 +11:00
J Blackman
43f1c74c64
FIX: CRSF no active serial port and telem causing hardfault ( #12496 )
...
* FIX: no active serial port and telem causing hardfault
2023-03-11 06:50:45 +11:00
Homer
6d4921e5bf
FIX CONFIG: MATEKF405TE /MINI ( #12492 )
...
* FIX CONFIG: MATEKF405TE /MINI
* changes as requested
2023-03-10 20:17:02 +01:00
Brian White
2efc895cf9
Debug 8 columns ( #12445 )
2023-03-10 14:39:40 +11:00
J Blackman
38372c3dbd
FIX: SPI PIN defaults cleanup #2 ( #12487 )
2023-03-10 12:16:52 +11:00
tbolin
0c7061016f
Make dyn idle startup increase configurable ( #12432 )
...
* Make dyn idle startup increase configurable
Replace fixed 5 percent max increase from dynamic idle
when airmode is active with a configurable value.
-Default value is still 5.0 percent (50 in cli)
-Add dyn_idle_start_increase cli setting
-Add dyn_idle_start_increase BB header field
* Increse PG reset to ver 6 for pidProfile
* Indentation
---------
Co-authored-by: Mark Haslinghuis <mark@numloq.nl>
2023-03-09 23:21:14 +01:00
Mark Haslinghuis
4e4b63b0e6
CONFIG: Add BMP280 to GEPRCF722 ( #12491 )
2023-03-10 06:39:35 +11:00
howels
567298895c
Add 42688p gyro to JHEF411 ( #12490 )
2023-03-10 06:39:00 +11:00
J Blackman
804bc16475
FIX: ESCSERIAL_PIN not mapped correctly ( #12486 )
2023-03-10 06:38:00 +11:00
J Blackman
44bfbda40d
FIX: If local config applied, do not include all drivers. ( #12483 )
2023-03-10 06:37:43 +11:00
Mark Haslinghuis
ccffbbb555
FIX CONFIG ( #12480 )
2023-03-10 06:36:27 +11:00
Mark Haslinghuis
035888f37b
CONFIG: Fix SDCARD CS ( #12488 )
2023-03-10 06:34:31 +11:00
J Blackman
43bda54f90
FIX: RX SPI modules not correctly activating (incorrect CS pin definition) ( #12482 )
2023-03-09 21:34:21 +11:00
J Blackman
8e85029b00
FIX: SPI Pins, and I2C pins should be configured in config.h ( #12484 )
...
* FIX: SPI Pins, and I2C pins should be configured in config.h
* Set defaults to none.
2023-03-09 20:41:34 +11:00
J Blackman
5def26485b
FIX CONFIG: Incorrect inverter pin definition ( #12485 )
2023-03-09 19:59:57 +11:00
James
c5f3f86413
AT32 initial dshot support ( #12464 )
...
* AT32 dshot part1
Just enough dshot implementation to do timer pwm dshot output only.
Still to do:
telemetry, burst mode, bitbang
* AT32 Implement dshot telemetry
Enables bidir dshot for telemetry on AT32. Only timer-pwm is
supported, without burst mode.
* Updates for target.h and config.h
Removed a conflicting definition from target.h and added the PA9/10 uart pins
for the at-link serial connection, but these don't seem to be active until
added from the cli.
* Wrap erpmToRpm in #def
Hopefully fix problems with unit tests by making erpmToRpm conditionally
compiled again.
---------
Co-authored-by: J Blackman <blckmn@users.noreply.github.com>
2023-03-09 18:20:35 +11:00
J Blackman
7434e0134f
FIX CONFIG: SDCARD Inversion ( #12478 )
...
* FIX CONFIG: SDCARD Inversion
* Adding check for SDIO_DEVICE being defined
2023-03-09 18:18:10 +11:00
AJ92
2c71c1fc5b
added fake barometer sensor name to cli lookup table, fixes cli status crash for SITL ( #12474 )
2023-03-09 18:17:03 +11:00
J Blackman
c224c075f8
Cleanup of USB drivers for AT32F4 ( #12441 )
...
* Cleanup of USB drivers for AT32F4
* F4 has different directories
2023-03-09 18:14:16 +11:00
Mark Haslinghuis
deeebb4c1c
FIX CONFIG: BARO ( #12476 )
2023-03-08 23:58:23 +01:00
Mark Haslinghuis
977e470a48
FIX CONFIG: GYRO ( #12475 )
...
* FIX CONFIG: GYRO
* Rename GYRO_CONFIG_USE_GYRO_DEFAULT to DEFAULT_GYRO_TO_USE
2023-03-08 20:52:04 +01:00
J Blackman
80e9cfb998
Removing Brushed ESC auto detect ( #12479 )
...
- minimise pin "activation" on init.
2023-03-08 20:46:04 +01:00
ctzsnooze
e957f0dfa6
Improve GPS Rescue Pitch smoothing and disarming ( #12343 )
2023-03-08 16:10:25 +11:00
J Blackman
f0e7b21264
FIX CONFIG: Adding DSHOT default settings ( #12473 )
2023-03-08 16:09:04 +11:00
J Blackman
4ef252c51a
FIX CONFIG: Dashboard I2C bus instance ( #12470 )
2023-03-08 13:02:59 +11:00
Mark Haslinghuis
ee2ee56eba
Rename MOSI and MISO to SDO and SDI ( #12469 )
...
Rename MOSI/MISO
2023-03-08 04:33:48 +11:00
J Blackman
4d7092d215
FIX CONFIG: PIN IO CONFIG, PIN IO BOX ( #12467 )
2023-03-07 13:24:56 +01:00
Mark Haslinghuis
f41b3e911d
FIX CONFIG: MATEKF405TEMINI SPI3 + CONFIG DEFAULT_VOLTAGE_METER_SCALE + SYSTEM_HSE_MHZ ( #12468 )
...
* Fix MATEKF405TEMINI
* Add VBAT_SCALE
* Fix SYSTEM_HSE_MHZ
2023-03-07 04:49:23 +01:00
Mark Haslinghuis
b2b134b2c1
Add configuration ( #12463 )
2023-03-06 19:29:21 +11:00
J Blackman
629ed30e3a
FIX CONFIG: LED INVERSION ( #12459 )
...
RX_SPI LED Inversion define for ON.
2023-03-06 09:28:16 +01:00
J Blackman
4cb26fe13a
FIX CONFIG: ESC and NONE for current meters ( #12458 )
2023-03-06 09:27:02 +01:00
tbolin
9ce8d9c8e5
Fix ICM426XX AA filter ( #12444 )
...
* Change ICM426XX gyro initialization
- Shut down Acc and Gyro before setting non-GYRO_ODR, ACCEL_ODR, GYRO_FS_SEL, ACCEL_FS_SEL, GYRO_MODE, ACCEL_MODE registers
- Set correct User Bank before writing to registers
* Change ICM426XX GYRO_ACCEL_CONFIG0 to 15 from 14
* Remove unneeded delay commands
2023-03-06 15:41:53 +11:00
Mark Haslinghuis
58346417a1
FIX: update & clean configuration ( #12451 )
2023-03-06 11:10:49 +11:00
J Blackman
ca9dd3dc9c
FIX CONFIG: Enabling DSHOT BURST ( #12457 )
2023-03-06 00:39:53 +01:00
J Blackman
a6752a0d1c
FIX CONFIG: Further config.h mappings - CURR, BATT, BARO and BLACKBOX ( #12453 )
...
* FIX: Further config.h mappings
- current meter
- voltage meter
- adding USE_BARO
- black box device default
* Adding: ADC, BARO and CURRENT_METER_SCALE_DEFAULT
* Adding ACC, GYRO and BARO (where previously missed).
* Renamed CURRENT_METER_SCALE_DEFAULT to DEFAULT_CURRENT_METER_SCALE for consistency
2023-03-06 10:02:47 +11:00
Steve Evans
ab2088dc24
AT32F435 BlackBox FLASH support ( #12431 )
...
Add FLASH support to AT32
2023-03-05 20:03:50 +01:00
J Blackman
bc773d8a49
Adding SERIAL provider defaults. Removing auto-generation comment ( #12449 )
...
Merging so as to continue work on config.h to bring 4.5.0-zulu back to operational
2023-03-05 16:08:11 +11:00
Mark Haslinghuis
1588db5e79
Fix Config ( #12448 )
2023-03-04 13:16:47 +11:00
Mark Haslinghuis
c92601b611
Fix Matek H743 ( #12447 )
2023-03-04 13:15:39 +11:00
J Blackman
799e0c1e50
FIX: Multi gyro and SDIO hard fault ( #12446 )
2023-03-04 12:43:25 +11:00
J Blackman
3470fd5584
OSD is always enabled for SPRACINGH7RF and comments in config fix ( #12440 )
2023-03-04 12:43:08 +11:00
Steve Evans
3cc056f192
Rename ACC to ACC_REGS ( #12429 )
2023-03-03 20:20:21 +11:00
Hans Christian Olaussen
f59b7e791f
H7 Fix frozen ADC values ( #12439 )
...
H7 ADC buffer invalidate cache
2023-03-03 15:57:29 +11:00
